Used Reis Assembly Station for sale (9,044)

Condition: excellent (used), functionality: fully functional, Georgian bar assembly table Complete In very good and clean condition Todpfxoztyzro Anteb Good working order, tested As it is Available immediately

Condition: excellent (used), functionality: fully functional, Georgian bar assembly table Complete In very good and clean condition Good working order, tested Todpfx Ansztyw Tstjb As it is Available immediately

Year of construction: 2016, condition: used, Suitable for Kolbus BF 512 Tjdpfxsid Nvwe Antob

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, DHP HYDRAULIC STATION LIFT - 1.5t DHP hydraulic bench jack is used for stepless lifting and lowering of material at assembly, loading and machining stations with table dimensions similar to EUR pallet, allows to maintain a constant working level when loading or unloading material. Lifting of the lift table is carried out by means of two hydraulic cylinders, powered from a compact electro-hydraulic unit, controlled from the cassette. The cassette is equipped with "lifting", "lowering" and "EMERGENCY STOP" buttons. Load capacity max kg 1500 Dimensions of the table standard mm 900x2000 Height in folded state (standard) mm ~230 Working stroke (max) mm 1100 Lifting time s approx. 30 Pressure in the hydraulic system MPa max 16 Noise level dBA approx. 72 Tedpfxjt Ubn Ns Antsb Installed power kW 1.1 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Weight of the device kg ~450

Condition: good (used), Year of construction: 2021, machine/vehicle number: 22112P114, Offer 24107 Tedpfx Aotyli Nonteb Technical data: - Pump station unused in mint condition - Pump make DELIMON type FZ-B 3.75 ccm/m. - Flow rate 7.6 cm³/min - Pressure capacity up to 200 bar - Lubrication unit fill level - thermostat - fan - 400 V electrical connection - installed in RITTAL switch cabinet with hinged lid and two hinged doors - Space requirement approx. W 1100 x H 1100 x D 500 mm - Weight approx. 100 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 00100060311, Item No. 26090 Technical data: Tedpfx Aezd T S Esntsb - Design: vertical - Max. operating pressure: 10 bar - Pressure vessel capacity: 270 l - Suction volume: 585 l/min - Delivery rate: 440 l/min - Compressor speed: 1200 rpm - Drive: 400 V / 4.0 kW - Boiler diameter, approx.: 600 mm - Space requirement, approx.: W 800 x H 1850 x D 900 mm - Weight, approx.: 150 kg

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, For sale is a professional, indirect-fired oil-fired heater, APEX model BGO-80B (Type 56217), 80 kW heating capacity, manufactured in 01/2026, complemented by an external 1000-liter fuel tank system with an approved steel spill containment basin (manufacturer Dübi AG) including connecting lines. Application: Heating and drying of halls, workshops, greenhouses, storage rooms, and outdoor areas in the construction and agricultural sectors. Not suitable for closed rooms without ventilation. The unit has an integrated 69-liter tank system but can optionally be connected directly to the supplied external 1000-liter fuel tank system via the existing oil-resistant, reinforced connecting lines (Ø 10 mm, 2 m length). This allows for significantly longer continuous operation without refilling. Buyers who only need the heater can forego the external fuel tank and use the internal 69L tank system. Heater features: Integrated electronic thermostat with digital display (setpoint/actual value setting) Additional external room thermostat with a 10 m connection cable (remote measurement/control) Automatic electronic ignition with flame monitoring Danfoss injection pump, stainless steel combustion chamber with fan cooling External, easily accessible fuel filter Chassis with extra-large wheels and handle Removable exhaust stack (Ø150 mm) for direct connection to an exhaust pipe Technical data of the heater: Parameter Value Model APEX BGO-80B (Type 56217) Heating capacity 80 kW / 68,800 kcal/h Fuel Diesel / heating oil Consumption 7.5 l/h Tedpfxszrwape Antob Mains voltage 230V ~ 50Hz Fan motor 900 W Blower capacity 2,000 m³/h Blower outlet diameter 340 mm Flue connection Ø150 mm Tank capacity (internal) 69 l Dimensions (L x W x H) 1330 x 568 x 1028 mm Weight 59 kg Year of manufacture 01/2026 Protection class IPX4 External fuel tank system (included): Plastic tank, 1000 liters, with level indicator Steel spill containment basin "Dübi", 100% retention volume, EAGS certificate, manufacturer's serial number 199890 2x connecting lines, Ø10 mm, 2 m, oil-resistant/reinforced (compatible with internal or external tank) Total scope of delivery: 1x APEX oil-fired heater 80 kW with thermostat, digital display, and exhaust stack 1x external room thermostat including 10 m connection cable 1x 1000L fuel tank system with steel spill containment basin 2x connecting lines Ø10mm, 2m Condition: Well-maintained, very little use (approx. 200 operating hours), fully functional. Location: 6064 Kerns, Obwalden

Condition: good (used), Year of construction: 2014, 4x pallet transfer stations, safety gate / swing gate – used: Price per unit ex warehouse: €750 (net), disassembled, packaged and loaded! Manufacturer: unknown Todpfx Anezq Aaljtjb Type: unknown Year of manufacture: 2014 Minimum 2x yellow stations Internal width approx. 3.20m, depth approx. 1.60m, height approx. 2.60m Minimum 2x galvanized stations Internal width approx. 3.18m, depth approx. 1.60m, height approx. 2.60m Condition: good Available: from approximately Q4 / 2026 Location: Hamburg

Condition: excellent (used), working very well Todpozi Szvjfx Antjb

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm strip thickness: 1,5 mm Tedpfxjbif E Ej Antob

Condition: new, Big-bag emptying station with cyclone separator For sale is a big-bag emptying station with an integrated cyclone separator, ideal for the low-dust handling and discharge of various bulk materials such as plastic granules, ground materials, powders, or recycled materials. Todpfozpw U Uex Antob The system is in fully functional condition and is available immediately. An inspection can be arranged at any time at our warehouse in Wuppertal.

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. Todpfjzrg I Aex Antob The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Tsdpfxoi Artlo Anteb

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 5,000 l, This offer consists of a new tank with the capacity of 5000 litre and a pump with a flow rate of 75 litre per minute. It is designed to store diesel or heating oil. Tsdpfx Anoi A Hlfjtob We can also offer transport separately to a specified location. Please contact us for more details.

Condition: good (used), functionality: fully functional, machine/vehicle number: 5.000 Liter-Tankstelle, tank capacity: 5,000 l, 5.000 l diesel or heating oil pump station Tedpfx Anedccdqstob

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ogs30-GA-130-40-MZ, tank capacity: 30,000 l, this is a 30m³ storage tank, it is pre-owned but overhauled and can be used to store diesel, it has also a diesel pump which is new Tsdpfecybvzjx Antob

Year of construction: 1999, condition: ready for operation (used), A hydraulic lifting table Schmidler with a clamping unit for the woodworking industry is available. Machine dimensions X/Y/Z: approx. 12000mm/2550mm/3400mm. Documentation available. An on-site inspection is possible. Tsdpfx Aezp Rf Hontjb

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions Todpfxeznmfaj Antjb 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Tsdpocx R D Hsfx Anteb Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Tsdpfx Aomck Ryontsb Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Year of construction: 2010, input voltage: 230 V, laser power: 20 W, scan area length: 110 mm, scan area width: 110 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table length: 300 mm, table width: 400 mm, laser wavelength: 1,064 nm, working height: 300 mm, input frequency: 50 Hz, working width: 400 mm, We are offering this used Trotec laser workstation engraving machine, manufactured in 2010. Designation: Laser Workstation Version: Laser safety class 2 Laser type: Nd:YAG Wavelength: 1064 nm Year of manufacture: 05-2010 Reference number: LWS_2475 Tjdpezph Tujfx Antob Connection voltage: 230 V Frequency: 50 Hz The laser has been replaced by a model with a larger processing area. Processing dimensions: 300 mm x 400 mm x 300 mm (L x W x H) Marking area: 110 mm x 110 mm The laser source was renewed one year ago. 20-watt fiber laser. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase Tjdpsdy Hqvefx Antsb CE Safety requirements

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Tsdpjdzc Rfsfx Antjb Optional side and end stops for floor cassette assembly

Condition: used, Mobile assembly platform, Workmaster, podium ladder, platform staircase ZARGES type Z-53796 Aluminum ladder, access ladder Year of manufacture: 2016 Platform height: approx. 45 / 73 / 1000 mm Platform size: 1700 x 600 mm - 3 steps + podium - Aluminum construction - Foldable staircase with 200 mm deep steps and non-slip surface - Platform with non-slip surface - Movable on swivel casters, 4 swivel casters with locking mechanism Todpfx Anoznrquetob - Lowering device on the stringer as a central brake - Assembly platform foldable, can be disassembled for transport Space required L / W / H: 2600 x 740 x 1940 mm Transport dimensions L / W / H: 2000 x 950 x 670 mm Weight: 54 kg Very good condition, like new

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, table width: 600 mm, table length: 600 mm, total length: 1,869 mm, total width: 850 mm, total height: 2,620 mm, overall weight: 2,900 kg, Hidrobrasil Single-Column Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a hydraulic single-column press (C-frame type) manufactured by Hidrobrasil, featuring 30 t pressing force and a compact design. The machine is equipped with a table size of 600 × 600 mm, making it ideal for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. ==== Technical Data & Information: Hydraulic Single-Column Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Design: C-frame press - Machine type: Assembly press - Pressing force: 30 t Tedpfx Anjvhcyketsb - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downward speed: 10 mm/sec - Upward speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly operations, press-fitting operations, straightening work, workshop applications, small series production Hydraulic press, single-column press, C-frame press, assembly press, industrial press