Used Relay for sale (520)

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Iijdpfezikcxjx Amgeh Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: used, mileage: 112,000 km, power: 120 kW (163.15 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,260 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: DIFFERENTIAL LOCK, STANDING HEATER, electrically operated! Isdpfx Aezirlhemgsih 2nd battery (auxiliary battery), interior, storage compartment in the headliner of the cab, airbag on the passenger side, acoustic package, trailer socket 13-pin, exterior mirrors electrically foldable, battery disconnect switch 1-pole, mounting rails for roof racks, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, constant speed control (electronic), grab handle on the rear pillar, left side, grab handle on the rear pillar, right side, driving assistance system: active brake assist, tachograph operation at the front, under the headliner, digital tachograph, chassis: stabilization level II, vehicle without vehicle lowering, gearbox lock for auxiliary drive, cup holder at the front, grab handles on the A-pillars, additional master key, rear door (opening angle 270 degrees), terminal block for electrical connections (driver's seat box), head airbag system (window bag), fuel tank: main tank 93 liters, cargo area light LED, cable duct on the rear portal, cable duct on the side wall, marker lights on the side, multimedia system MBUX (touchscreen 7"), navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, configurable special module, cross member with integrated step, smoker's package, spare wheel with road tires, spare wheel holder under the end of the frame including jack, reversing camera, reversing warning system (acoustic warning signal), shoulder-pelvis airbag (thorax-pelvis sidebag) passenger side, shoulder-pelvis airbag (thorax-pelvis sidebag) driver side, seats in the cab: double passenger seat, seats in the cab: driver's comfort seat, socket (12V connection) in the cab, fuel level sensor for auxiliary heater, separating relay for battery, USB connection in the center below the dashboard (charging function only), fleece battery 92 Ah, reinforced front axle, preparation for all-round beacon lights, jack, thermal protection glazing (windshield with band filter at the top) Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, adaptive brake light, airbag driver side, anti-slip control (ASR), display for washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior temperature display, automatic activation of headlights, grab handle for sliding door on the cargo area partition, electronic brake force distribution (EBV), driving assistance system: side wind assist, body/superstructure: high-roof box-type standard, child safety lock, communication module (LTE) for digital services, cargo area partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, low emissions according to emissions standard Euro 6, sliding door cargo/passenger compartment right, seat belt system with warning system (passenger side), seat belt system with warning system (driver side), seat cover / upholstery: fabric, start/stop system engine, trailer stability assist (TSA), maintenance interval indicator Assyst, permissible total weight 3.50 t

Condition: used, mileage: 294,750 km, power: 129 kW (175.39 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 26 m³, loading space length: 4,360 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, Equipment: tail-lift, * FUSO 7 C 18, flatbed truck, 4.35 m, with LBW BÄR BC-S4 1000 KG * Body: ORTEN City-Liner with 2-row cargo securing system * Tow hitch, ball-type, 3,500 kg * In very well-maintained condition!!! * Vehicle number for customer inquiries: 4760 * Tail lift * 7.5-ton truck, comfort cab, 129 kW, AMT, Euro VI OBD AEBS * Airbag, driver * Trailer socket with electrical wiring * Body mounting brackets on the vehicle frame * Left-hand drive * Model series Canter TF, TF1 * Operating manual, German * Hill start assist * Limited-slip differential * Spacer, for fuel tank * Single cab, vehicle class N2 * Spare wheel holder, double-secured * Driver comfort suspension seat, horizontal suspension * Vehicle battery reinforced, 2x100Ah (2 batteries) * General contractor: Werk Wörth * Manual for digital tachograph, German * Warning stickers, Germany * Domestic (Germany) * Automatic climate control * Standard equipment for flatbed/box truck * MOSOLF, Canter delivery package incl. floor mats * MOSOLF, valve extension for twin tires on rear axle * MOSOLF, rear end cross member on the frame end * Radio CD with Bluetooth function * Wheelbase 3400 mm * Rearview mirrors, heated * Protective cover for AdBlue tank * Long mirror arm incl. wide-angle mirror * Cruise control * Traction tires, rear * Preparation for battery disconnection relay 12V * Registration certificate, Part II, prepared * Environmental badge (green) * Three-seater * Maintained according to service schedule * 2/3-door Ijdpfszllk Nox Amgeih No liability for printing and typographical errors Sale only to commercial customers Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract shall prevail. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Guarantee insurance possible upon request with the insurance company * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: excellent (used), Year of construction: 1995, operating hours: 123 h, Technical Description – Cassel Metal Shark® Octa Product Description: The Metal Shark Octa is an industrial metal detection system with an octagonal aperture, specifically designed for the reliable detection of metal contaminants in bulk materials or products on conveyor belts or in gravity chutes. It detects ferrous, non-ferrous, and stainless steel particles with high sensitivity. Key Features: Remote monitoring via SHARKNet® software Digital Signal Processing (DSP) for precise and stable detection Octagonal aperture for optimal material flow and detection area High sensitivity – typical detection performance: Ferrous: ≥ 0.8 mm Non-ferrous (e.g., aluminum): ≥ 1.0 mm Iiodpfxsztl Hys Amgoh Stainless steel: ≥ 1.2 mm (depending on the product and size) Automatic calibration and compensation of product effects Touchscreen display with user-friendly, multilingual interface Hygienic stainless steel housing, available in IP65/IP66 Power supply: 100–240 V AC, 50–60 Hz Outputs: Relay, 4–20 mA, digital inputs/outputs, Ethernet, USB Application areas: Food industry, chemical industry, pharmaceuticals, recycling, wood and plastics processing Advantages: Excellent noise suppression Reliable continuous operation 24/7 Easy integration into existing systems Support for HACCP, IFS, BRC, and other QM systems

Condition: used, mileage: 197,958 km, power: 95 kW (129.16 HP), first registration: 01/2013, overall weight: 5,300 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2012, total length: 6,400 mm, total width: 2,100 mm, total height: 2,800 mm, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, trailer socket 13-pole, audio system Audio 20 (radio with CD player), exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), turn signals on the front sides, roof console with reading light on driver/passenger side, entry lights, generator 220 A, additional main key, folding cover for storage compartment, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, configurable special module, spare wheel with Super-Single tire (235/65 R16), reversing warning system (audible warning signal outside), interior rearview mirror, rear wall with window, mud flaps in front, seat cover/upholstery: artificial leather (cab), seats in the cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall trim, reinforced front axle, preparation for tachograph, thermal insulation in the driver's cab, auxiliary heater (hot water) Additional equipment: Adaptive brake light, driver's airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake system with ABS+ASR, headlining in the cab, lockable glove compartment, body/structure: standard double-cab pick-up, fuel tank: main tank 75 liters, headlight range control, engine 2.1 liters - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), service interval indicator Assyst, heat-insulating glazing, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle Iijdpfx Ajzwn A Eomgeh Additional equipment: central locking * Auxiliary heater * Radio * Snow plow mounting plate with hydraulic quick coupler * Control for snow plow * Elevated headlights * Trailer hitch * Turning assistant * Rotating beacon +++Signs of wear and tear due to use+++Owned by a municipality since new+++

Condition: used, mileage: 349 km, power: 129 kW (175.39 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 3,690 kg, maximum load weight: 3,800 kg, overall weight: 7,490 kg, wheelbase: 2,800 mm, next inspection (TÜV): 06/2027, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, central locking, differential lock, electronic stability program (ESP), fog lights, parking sensors, power assisted steering, second-hand vehicle warranty, trailer coupling, Exterior * Trailer coupling / trailer load 3,500 KG * Heated exterior mirrors Interior * Automatic climate control * Driver comfort suspension seat, horizontal suspension Safety * Airbags for driver and front passenger Comfort and Environment * Rear view camera * Tire pressure monitoring system (TPMS) * Lane keeping assist * Blind spot assist * Rear parking sensor Other * 2 DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay, and hands-free system * Cover, exhaust system * AdBlue tank cover * Trailer socket with electrical kit * Battery cover, double * Batteries, 2x12V / 100 Ah, maintenance-free * Edge protector for the cargo bed * Three-way tipper, floor and side walls made of steel 3600 x 2200 x 400mm * Spare wheel holder, double-secured * Euro 6 OBD Step E * Gearbox PTO 200 Nm for hydraulic pump * Hand throttle, engine speed * Rear end cross member at the end of the frame * Rear underrun protection * LED headlights * Hire purchase/financing or leasing via Daimler Truck Financial Service Deutschland (DTFSD) is possible. We will gladly prepare an offer for you. * Payload 3800 KG * All-round rotating beacons, left and right * Protective seat cover set, Alcantara, front * Fuso safety package including floor mats * Medium mirror holder including wide-angle mirror * Valve extensions * Preparation for battery disconnect relay 12V * Limited-slip differential Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: On request, 12 or 24 months Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors * Errors and prior sale excepted Iiodpfx Amozupk Esgoh

Condition: excellent (used), Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging -Type: DSW 3TF 8133 -Item No.: 87535044 -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg Isdpezmupwsfx Amgjih

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Isdpfx Amjyimpaegsih Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: used, mileage: 235,652 km, power: 140 kW (190.35 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 3,100 kg, maximum load weight: 780 kg, overall weight: 3,880 kg, wheelbase: 3,665 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 5, total length: 6,340 mm, Year of construction: 2016, construction height: 2,820 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, traction control, Standard equipment: - Exterior mirrors electrically adjustable and heated, both sides - Headlight range adjustment - Exterior mirrors with integrated turn signals - ASSYST maintenance interval display - Washer fluid level indicator - Driver's airbag - Lockable glove compartment - Roof lining in the driver's cab - Seat upholstery: Lima fabric - Seats in driver's cab: adjustable passenger seat - Passenger seat with armrest - Driver’s seat with armrest - Electric windows (2x) - Central locking with remote control - Seat belt system with warning indicator (driver’s side) - Immobilizer - Anti-lock Braking System (ABS) - Brake system with ABS + ASR - Brake assist - Steel wheels 6.5x16 - Tire repair kit with compressor - Power steering - Electronic Stability Program (ESP) - Particulate filter - Emission standard Euro 6 (low-emission) - Fuel tank: main tank 75 L - Wheelbase 3665 mm - Drive type: rear-wheel drive - Automatic transmission G-Tronic (7-speed) - Engine 3.0 L - 140 kW CDI CAT Special equipment: - Steering column mechanically adjustable - Heat-insulating glazing (windshield with top shading band) - Programmable special module - Exhaust ahead of rear axle, left side - Automatic climate control (Tempmatik) - 220 A alternator - Fuel tank sender for auxiliary heater - Head airbag system (windowbag) - Comfort headrests, driver’s seat - Comfort headrests, passenger seat - Head-shoulder airbag (thorax airbag) for driver/passenger - Light and rain sensor - Passenger airbag - Bi-xenon headlights with cornering light - Front mud flaps - Interior rearview mirror - Driver assistance system: Lane Keeping Assist - Fleece battery 95 Ah - Reinforced front axle - Paintable bumpers - Comfort open/close with infrared remote control - Rear stabilizer - Additional main key Ijdpfswzch Tsx Amgsih - Reinforced front stabilizer - Audio system Audio 15 (radio with color display) - Hill start assist - Auxiliary heater (hot water) - Folding cover for storage compartment - Driver’s seat comfort - Passenger seat comfort - Outside temperature display - 1 DIN slot front under roof lining - Entry lights - Roof control unit with reading lamps (driver/passenger) - Additional battery (reinforced) - Separation relay for additional battery - Single-pole battery isolation switch - Fog lights - Mobile stretcher - Ambulance bodywork - Reversing camera (monitor removed) - Rescue socket (Rettbox) - UDS (Universal Docking Station) - Signaling system - Electrically operated step under sliding body door Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: good (used), Hydronit 24V DC motor with integrated fan cooling and thermal protection: - 3000W Iiodswzhwyjpfx Amgsh - 2600 rpm - 180 A - S2 = 4 min - S3 = 8% - With starter relay Coupled to a Group 1 gear pump: - Displacement 5.18 cm³/rev - Speed range 500 - 3500 rpm - Max continuous pressure approx. 230 - 250 bar - Connection M16

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Ijdewzmcbopfx Amgeih COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL Iodpfx Aow Sxptomgjih 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Iisdpfx Ajw U Ry Nemgoh Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Iisdpoxc Rmqefx Amgjh Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description Iiodpfxsxvca Aj Amgeh The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and stepless frequency conversion controlling. Including infeed conveyor, no product no bag function, easy change of packaging size. WEINVIEW Touch Screen, OMRON Relay, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: bag sizes: L(100-230)xW(100-150)xH(40-100)mm; max. speed of the machine in neutral: 50 cycles/minute; power: 380V, 3.7kW; machine dimensions: L3560xW5885xH1925mm; 3300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Isdpfx Amsv Nmbnogeih

Year of construction: 2025, condition: new, Complete compact vertical packaging system including 10-head multihead weighing unit (1.3 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal parts or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: 150-1200ml; film width: max. 420mm; bag size (mm): min.-max. L(60-300)xW(60-200); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 2.2kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1080x1300x1400mm; machine weight: 500kg. The weighing unit is equipped with 10 weighing heads (1.3l/head) for high weight accuracy and also controlled with PLC (via touchscreen, also in different languages available). 99 programs can be preset, step motor can be set according to different products. - Specifications: hopper capacity: 1.3l; weighing range: 10~1000g; accuracy: ±0.3~1.5g (depending on product); max. speed of the machine in neutral: 60 cycles/min; stainless steel 304; 220V, 1.5kW; dimensions of the weighing unit LxWxH: approx. 1436x1086x1258mm; machine weight: 400kg. - Specifications of the Z conveyor (automatic transport of the material to the weighing unit): dimensions depending on customer needs (normal height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight 500kg. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary table to collect finished bags from outfeed conveyor. Speed is adjustable; diameter of table: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform, required to get access to the weighing unit and upper part of packaging machine, dimensions LxWxH: approx. 2x2x2m. Total dimensions of complete system approximately L3200xW3200xH3600mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Iisdpfov Nmirjx Amgoh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task.

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including 10-head multihead weighing unit (1.3 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 3000ml; film width: max. 520mm; bag size (mm): min.-max. L(80-400)xW(80-250); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1150x1790x1650mm; machine weight: 600kg. The weighing unit is equipped with 10 weighing heads (1.3l/head) for high weight accuracy and also controlled with PLC (via touchscreen, also in different languages available). 99 programs can be preset, step motor can be set according to different products. - Specifications: hopper capacity: 1.3l; weighing range: 10~1000g; accuracy: ±0.3~1.5g (depending on product); max. speed of the machine in neutral: 60 cycles/min; stainless steel 304; 220V, 1.5kW; dimensions of the weighing unit LxWxH: approx. 1436x1086x1258mm; machine weight: 400kg. - Specifications of the Z conveyor (automatic transport of the material to the weighing unit): dimensions depending on customer needs (normal height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight 500kg. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary table to collect finished bags from outfeed conveyor. speed is adjustable. Diameter of table: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform, required to get access to the weighing unit and upper part of packaging machine, dimensions LxWxH: approx. 2x2x2m. Total dimensions of complete system approximately L3200xW3200xH3600mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. Iiedpov Nmixofx Amgoh That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task.

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including auger dosing unit, screw conveyor and outfeed conveyor. Suitable for powdery products with a high or a low fluidity. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: 150-1200ml; film width: max. 420mm; bag size (mm): min.-max. L(60-300)xW(60-200); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 2.2kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1080x1300x1400mm; machine weight: 500kg. The auger dosing unit has a capacity up to 50l (hopper) and following specifications: filling range: 10-300g; max. speed of the machine in neutral: 60 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 1kW; auger filler dimensions LxWxH: 510x585x930mm, weight: 100kg. Screw conveyor for automatic transport of powdery materials to the auger filler. The vibration motor assured an evenly product flow. Capacity of infeed hopper up to 150 l. - Specifications: Hopper, conveyor length and angle can be customized to meet individual customer requirements. Total dimension depends on it. Length of conveyor: 3~4m; stainless steel 304; packaging speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg . Deviations from specifications are possible. Supporting pole optional. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total dimensions of complete system approximately L2280xW3100xH2330mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. Iiedpfx Amov Nmkpegsh That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw Iiedpfx Asv Iccfsmgeh • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: used, Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Fisher, LPG pressure regulator series 912 -Type: 912H-108 -Control range: 0.5-2.7 psi -p max.: 250 psi / 17.2 bar -Dimensions total: 165/70/H85 mm Ijdpjuxg Nzofx Amgoih -Weight: 0.5 kg

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 Iedpfx Amjynwx Sjgeih For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses Iiodsvcbf Ispfx Amgjh - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, tilt adjustment saw blade: 45 °, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW Iijdpozdkttsfx Amgsh System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: used, mileage: 79,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,440 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Beautiful and well-maintained VW T6 L1 4Motion / All-Wheel Drive van, optimal equipment, ideal for trades and businesses. Workshop/shelving system by Sortimo and electrical systems (details below). Rear wing doors All-wheel drive (4Motion, 4M, 4x4, 4WD) Underride protection for engine/transmission made of plastic GVWR 3.2 t (including reinforced 16" steel rims) Trailer hitch with 2.5 t towing capacity LED lamps (low beam + high beam) retrofitted Auxiliary heating / additional heater (water), programmable and with remote control Heated driver's seat Climatic air conditioning with activated carbon filter 3-seater, double passenger seat with foldable work surface Comfort driver's seat with foldable armrests, adjustable in multiple ways: seat height, backrest, lumbar support Seat covers in Simora fabric Driver assistance systems: - PDC Park Distance Control front and rear, visual + audible display - Surround monitoring system (Front Assist) with City Emergency Braking function - ACC Automatic Cruise Control (automatic distance control) - Cruise control (adaptive) with automatic distance control ACC and speed limiter - Fatigue detection - Hill start assistant - Trailer stabilization - Tire pressure monitoring - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP, EDS Light and Visibility Package - Automatic headlight activation - Automatic windshield wipers Leather multifunction steering wheel - Automatically dimming interior mirror Composition Media audio system (radio/CD player, MP3 playback function) - Radio - CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multifunction display Plus / On-board computer Driver and passenger airbags Electrical Package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights Spare wheel and jack 2nd battery with separation relay 2x 12V socket in the cab Iodpfszz Aaasx Amgjih Heated windshield washer nozzles Wheelbase 3000 mm Sliding door on the right side of the cargo area with tinted glass Rear wing doors with tinted, heated glass, with wiper system Commercial vehicle registration N1 Engine 2.0 L - 110 kW TDI 6-speed manual transmission Steering wheel adjustable in length and height Heat-insulating glass Cargo area equipment: Workshop installation by Sortimo (similar to Aluca, Bott, Würth). Shelving on both sides with shelf compartments, storage compartments, holders for small parts containers (without containers) and drawers (5x). Extendable workbench. Cargo area partition with window. Robust wooden floor. Load securing through fastening rails. Walls (with plastic panels) and ceiling lined. LED lighting. Ventilation and air intake. Electrical systems: 230V voltage converter/inverter, supplied via auxiliary battery. 4 x 230V sockets with fuse protection. Cargo area dimensions: - Length at the bottom: approx. 244 cm - Length in the middle: approx. 225 cm - Length at the top: approx. 220 cm - Height: approx. 134 cm Mounted tires: Winter tires 215/65 R 16 with approx. 5 mm tread depth at the front and approx. 4 mm or approx. 6 mm at the rear Additional tires: Summer tires 205/65 R 16 with approx. 4/4/5/5 mm tread depth Service history according to VW: 06.2021 / 22,700 Longlife inspection 08.2022 / 35,184 Longlife inspection + service 1 + oil change for all-wheel drive coupling 07.20