Used Renner Rs-18,5 for sale (6,844)

Condition: good (used), Year of construction: 2016, Year 2016 Description Product Length: Minimum: 180 mm (7.09") Maximum: 500 mm (19.70") Product Width: Minimum: 145 mm (5.71") Maximum: 320 mm (12.60") Compressed Log Length: Minimum: 700 mm (27.56") Maximum: 1,200 mm (47.24") Maximum Log Weight: 170 kg (375 lbs) Cycle Time: 17 seconds (product dependent) Palletizing Height: Bottom edge of log: 100 mm (3.93") Top edge of log: 1,500 mm (59.06") Pick-Up Height: 900 mm (35.43") Electrical Supply: 400 V 3 Phase (3~) N + PE 50/60 Hz Ibodpfxjzqrdto Anmsa Installed Power: 1.6 kW Compressed Air Requirement: 65 l/min at 6 bar (87 psi) Maximum of 4 cycles per minute Hose connection: Ø 13 mm Machine Weight: 1,300 kg (2,870 lbs)

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Ibedpfx Aoh Ir E Ejnmsa Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement Iodsh Itu Ejpfx Anmjba - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge Ibedpeqpgmcofx Anmea - Double press - Infrared counter - Outfeed left - Outfeed conveyor

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description -straight infeed Isdpfx Anszh Ev Rsmoba -infeed belt -reject unit -pressing station -turnoverbelt -delivery to right

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Pile height total stack: 330 mm Ibodpju R I Eusfx Anmoa Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Condition: good (used), Year of construction: 2003, Year of construction 2003 Size: Ijdsu R Ulbopfx Anmjba max. 320 x 320 mm min. 133 x 152 mm Pile height: Max. 330 mm Speed: max: max. 100,000 ex./h

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Speed max 18.000 c/h Ibodpjc Rntnsfx Anmea Pile height 235 mm Pile height pre-loading cage 124 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Iodpfx Aodyky Tenmoba Speed max up to 15.000 Prod./h Table height 876 mm

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment • - special: post code identification Iedpsdrhpfofx Anmsba

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm Ibedpodykhmjfx Anmsa

Year of construction: 1986, condition: used, Standard features Iedpfsbi Uwfsx Anmoba

Year of construction: 2013, condition: good (used), Rebuilt 2013 Size: max 420 x 360 mm min 105 x 70 mm Speed: max 5100 c/h Equipment - hand fed station - 12 stations - missing sheet and double sheet control - criss-cross delivery standards: - 1 set of operating manuals 1- set of electrical diagrams standard tools: - 1 spare part catalogue standard equipment: Iedpfx Aehc Nllonmeba Condition cleaned & checked Helmstedt, Germany next airport Hannover

Condition: good (used), Size: max 530 x 530 x 527 mm min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Equipment: • infeed unit with degree bumbers • cutting unit • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 Iodpod R Tgzsfx Anmoba • bump turn 1530

Condition: used, mileage: 323,400 km, power: 324 kW (440.52 HP), first registration: 03/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro6, total width: 2,500 mm, total height: 3,630 mm, loading space volume: 22 m³, loading space length: 5,650 mm, loading space width: 2,400 mm, loading space height: 1,600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * MAN TGS with tipper body and rear-mounted crane * Bordmatik on the left (2 cylinders) * Crane: Hiab Jonsered 1300 RS 83 * Hydraulic grab: KG 25-2-1000 * High seat control (Euro control) * Chassis with leaf suspension * Rear axle differential locks * Rear axle as AP axles * Trailer brake system Ibedpfxswhtxio Anmea * D 50 trailer coupling * Duomatic brake connection * 2-circuit trailer hydraulics * Centrally positioned cab * Rotating beacons * Electric windows and mirrors * Air horns * Sun visor * Seat heating * Auxiliary heater * Automatic climate control * Refrigerator * CB radio * Air-suspended driver’s seat * and much more. * Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Erlo SEAR 25-RS drill, gear drill with automatic feeds, includes threading system, spindle speeds 64-3060 rpm, with chuck and protection, machine in very good condition, year 2006 Ibedpfx Anjv Rnhxomsa

Condition: good (used), Year of construction: 2001, Distance between centres: 600 mm Centre height: 180 mm Max. grinding diameter: 355 mm Min/max Z-axis feed rate: 0.01 / 15 m/min Ibjdpfxey Dz R Ss Anmoa Z-axis resolution: 0.5 µm Min/max X-axis feed rate: 0.01 / 10 m/min X-axis resolution: 0.5 µm Grinding wheel left side: 500 x 40 x 203 mm Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Workpiece spindle speed: 0-1000 rpm Workpiece headstock taper: MK 5 Tailstock centre taper: MK 4 Cylindricity adjustment: +10 / -4 degrees CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t

Condition: used, Sauter Type RS semi-automatic finger-jointing machine for joining timber workpieces using finger joints. The machine is suitable for processing offcuts and for producing extended solid timber slats. Consisting of: Ibedpfx Aneztvxyomea Sauter Type RS-FPEL 130 milling and gluing machine Sauter Type RS-DKPV 6 press Sauter DAS 500 cross-cut saw Technical data: - Milling height: 130 mm - Max. finished length: 3,000 mm - Workpiece width: 45–95 mm

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Ibsdpfx Ansztmz Eemoa Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Isdpfsztmviex Anmeba Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, mileage: 136,900 km, power: 100 kW (135.96 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Model Year * Model Year: 2021 Transmission * Manual transmission, 6 gears Driver Assistance Systems * Rear view camera Lights and Visibility * Headlight range adjustment * Tinted glass * Daytime running lights Audio & Communication * Radio * Digital radio reception DAB * AUX & USB connection * Hands-free Bluetooth Exterior * Leaf spring suspension * Electrically adjustable and heated exterior mirrors * All-season tires * Rear doors with 270° opening angle * Connector plug 1x13-pin: preparation Safety * Driver airbag * Electronic Stability Program ESP * Anti-Slip Regulation ASR * Anti-lock Braking System ABS * Immobilizer Interior * Fabric seats * Multifunction steering wheel * On-board computer * Partition * Load compartment floor, wood * Load compartment wall paneling, high-grade plastic Comfort * Air conditioning * Driver's seat, height-adjustable * Passenger bench seat * Power steering * Adjustable steering column * Power windows * Central locking with remote control * Cup holders Ibedpfszr A Npex Anmja Load Compartment * Length 4,680 mm, width 1,800 mm, height 1,900 mm * Volume 16 m³ Other Dimensions and Weights * Payload: 1,191 kg * Permissible total weight: 3,500 kg * Towed total weight: 7,000 kg * Wheelbase: 4,100 mm Additional Equipment * Used car seal: CERTIFIED PRE-OWNED Standard * Former rental vehicle -----Sold only to businesses, no warranty. -IVECO CERTIFIED PRE-OWNED STANDARD - Fluids topped up (except fuel) - Decals removed and basic cleaning - Signs of use / Vehicle may have damage - IVECO CERTIFIED PRE-OWNED PLUS (Surcharge net 2,000.00 + VAT) - New TÜV and emissions test - New inspection - Decals removed and basic cleaning - Technical inspection + repair - IVECO CERTIFIED PRE-OWNED PREMIUM (Surcharge net 3,500.00 + VAT) - TÜV and emissions test - New inspection - Optical preparation - Technical inspection + repair - Surcharge for trailer hitch net 750.00 Euro + VAT - Subject to prior sale - Your contact persons: - Mr. Axel Scheske, Tel. - Mr. Luca Netter, Tel.

Condition: used, mileage: 142,300 km, power: 100 kW (135.96 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Model year * Model year: 2021 Transmission * Manual transmission, 6 gears Driver assistance systems * Rearview camera Lights and visibility * Headlight range adjustment * Tinted glass * Daytime running lights Audio & Communication * Radio * Digital radio reception DAB * AUX & USB connection * Hands-free Bluetooth system Exterior * Leaf spring suspension * Electrically adjustable and heated exterior mirrors * All-season tires * Rear doors with 270° opening angle * Trailer socket 1x13-pin: preparation Safety * Driver airbag * Electronic Stability Program ESP * Anti-slip regulation ASR * Anti-lock braking system ABS * Immobilizer Interior * Seats, fabric * Multifunction steering wheel * On-board computer * Partition * Cargo area floor, wood * Cargo area wall covering, high-grade plastic Comfort * Air conditioning * Driver's seat, height adjustable * Co-driver's bench seat * Power steering * Adjustable steering column * Power windows * Central locking with remote control * Cupholders Cargo area Ibsdpfx Anszr A Niomja * Length 4,680 mm, width 1,800 mm, height 1,900 mm * Volume 16 m³ Other dimensions and weights * Payload: 1,191 kg * Permissible total weight: 3,500 kg * Gross vehicle weight: 7,000 kg * Wheelbase: 4,100 mm Additional features * Used car seal: CERTIFIED PRE-OWNED Standard * Former rental vehicle -----Sale only to commercial businesses without warranty - IVECO CERTIFIED PRE-OWNED STANDARD - Fluids topped up (except fuel) - Decal removed and basic cleaning - Shows signs of use / vehicle may have damage - IVECO CERTIFIED PRE-OWNED PLUS (additional cost, net 2,000.00 + VAT) - New TÜV and emission test - New inspection - Decal removed and basic cleaning - Technical inspection + repair - IVECO CERTIFIED PRE-OWNED PREMIUM (additional cost, net 3,500.00 + VAT) - TÜV and emission test - New inspection - Optical refurbishment - Technical inspection + repair - Additional cost for trailer coupling, net 750.00 euros + VAT - Subject to prior sale - Your contact persons: - Mr. Axel Scheske, Tel. - Mr. Luca Netter, Tel.

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net Ijdpfxeb Ny Eye Anmsba . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device Ibjdpfx Anjztw H Ejmja - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: Ijdpfezqf I Eox Anmoba As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)