Used Rotox Fbo 222 for sale (512)

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Nwjdpsw Dufiofx Akusg *

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Model: 48S Machine no.: 70.1025.002302 Year of manufacture: approx. 1972 Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg Nwedpfxex Nqklo Akuog

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Nwedpfx Aksv R Hameueg Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: used, Year of construction: 1976, functionality: unexamined, total length: 4,100 mm, total width: 1,900 mm, total height: 1,900 mm, bed width: 550 mm, rotational speed (max.): 1,800 rpm, For sale is a Boehringer DM550 centre lathe with leadscrew/feed shaft from 1976 (18.5 kW). The DM 550 features a swing diameter of approx. 550 mm (over bed) and offers high rigidity for heavy-duty and precise turning operations. The machine is in age-appropriate condition, has not been tested, and is being sold as-is. Our Service Promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you anytime, even after purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice. Njdjxyxu Djpfx Akuswg

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Workpiece weight (max.): Njdpfx Akjwywxdjuewg Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A Nwodowx Hktjpfx Akujg EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS Nwsdpfx Aswx E Tmjkusg General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Lathe with 4 tools only for 3-cylinder crankshaft

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Nodpfx Akexmd Uveuewg Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min Nedpfx Aksw E H E Rsuowg - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: Nwjdpfx Akowh Rp Ejuog - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Nwodpfxexdm Awj Akusg Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH Nwodpefmd Dhofx Akujg

Condition: good (used), Year of construction: 1995, fuel type: electric, Manufacturer: Hyster Tip: E 3,20 XM lifting capacity: 3200 kg lifting height: 3700 mm Fork length: 1200 mm Nwedpfx Akslz Nbpjuog

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-201-50-1289, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC machining center for milling, drilling, and edge banding! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Nedpfx Asy Uviwjkuowg Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Vacuum cups for workpiece clamping Positioning of vacuum cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool changer Milling spindle 2: Top Number of controlled axes milling spindle 2: 4 Automatic tool changer milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Position: Mounted on the main beam of the machine Number of positions edge roller magazine: 2 Gluing unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: On the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: On the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: On the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Edge roller magazine 4 tool magazines Barcode reader DATALOGIC Protective net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8527

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Nwjdew Nyfwepfx Akusg Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries Njdpfx Aow Nygnjkuowg 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), mileage: 504,602 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 6x2, fuel: diesel, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,600 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, Year of construction: 2014, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Outside temperature gauge - Heated mirrors - Passenger seat - Hands-free system - Sunroof - Differential lock - Digital tachograph - Speed limiter - Lift axle - Air conditioning - Air suspension - Air-suspended seats - Air horn - Particulate filter - Radio/CD player - Side door - Sun visor - Stability control - Automatic heating system - Power take-off (PTO) - Tow hitch = Additional Information = General Information Year of manufacture: 2014 Nedpfjy U Eyrjx Akuowg Transmission Gearbox: ZF, Automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55 R 22.5; Max. axle load: 8500 kg; Steerable; Tire tread depth left: 95%; Tire tread depth right: 95% Rear axle 1: Tire size: 315/60 R 22.5; Double tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 95%; Tire tread depth left outer: 95%; Tire tread depth right inner: 95%; Tire tread depth right outer: 95%; Reduction: single reduction Rear axle 2: Tire size: 385/55 R 22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread depth left: 95%; Tire tread depth right: 95% Weights Unladen weight: 15,360 kg Payload: 10,640 kg GVW: 26,000 kg Functional Mast: Telescopic (4 sections) Body manufacturer: HMF 2620-K4 CE marking: yes Condition Technical condition: very good Optical condition: very good

Condition: used, maximum load weight: 29,750 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 07/2026, loading space length: 9,500 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 53 m³, Year of construction: 2023, Equipment: ABS, Stock no. 5829 Approx. 53 m³ Kempf tipper semi-trailer with combination door / plastic floor / pallet-width / aluminum rims / drum brakes ----* Manufacturer: Kempf * Type: SKM 36/3 AK * First registration: 06/2023 * Gross weight: 36,000 kg * Unladen weight according to vehicle registration document: 6,250 kg * Payload: 29,750 kg * Suspension: Air suspension with raising and lowering function * Axles: 3 x BPW with 1st axle as a lift axle / drum brakes Nwodey U Dl Hspfx Akueg * Tires: 385/65 R 22.5 approx. 50% on aluminum rims * Color: Chassis Novagrau, tipping body traffic yellow, roll tarp Enzianblau * EBS Knorr * TÜV (technical inspection): 07/2026 * Volume: approx. 53 m³ (9.50 m long x 2.43 m wide x 2.30 m high) * Floor lined with plastic * Side walls approx. 0.75 m high, lined with plastic * Combination door (swing door + split doors 1/3 to 2/3) * Grain discharge slide in the center * Grain hopper with dust bag * Vibrator * Cargo area lighting * Reversing warning * Roll tarp with central locking * Operating platform at the front with access ladder on the left * Entry inside the semi-trailer at the front left * 2 cross members * Foldable tarp frame * Foldable underrun protection * Towing eye * LED work lights * LED reversing lights * LED taillights * 2 x front toolbox on the left * Approx. 4.00 m aluminum extension ladder on the right * Individual fenders * Water tank at the rear right * Smooth outer walls * Pallet-width * Full load supports (aluminum drop-down supports) * Aluminum air reservoir * 1st owner German semi-trailer!! German documents!! 1st owner!! Very good condition!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or specifications. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 04/2014, loading space length: 100 mm, loading space width: 2,500 mm, loading space height: 2,710 mm, total width: 2,550 mm, suspension: air, tire size: 385/55, color: other, Year of construction: 2014, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Nodpfsy Ukqcox Akujwg Axle configuration Tyre size: 385/55 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 7.920 kg Carrying capacity: 22.080 kg GVW: 30.000 kg Identification Registration number: ON-98-GY

Condition: good (used), axle configuration: 3 axles, first registration: 05/2022, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,210 mm, color: other, Year of construction: 2022, Equipment: ABS, = Further options and accessories = - EBS = Notes = Number of axles: 3, Payload: 30,880 kg, Unladen weight: 8,120 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Year of body: 2022, Body material: Aluminium, Axle type: SAF = Additional information = General information Cab: Day cab Registration: OT-85-HB Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; left tyre tread: 12 mm; right tyre tread: 8 mm Axle 2: left tyre tread: 12 mm; right tyre tread: 12 mm Axle 3: left tyre tread: 10 mm; right tyre tread: 12 mm Weights Unladen weight: 8,120 kg Payload: 30,880 kg Gross vehicle weight: 39,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price segments. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Honest business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical service Nwedpfx Akevvr Dbousg • The safety of ‘recognisable quality’ • And more… Please visit our website for special offers and the complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty packages.

Condition: used, machine/vehicle number: XLWRT222079306537, fuel type: diesel, color: other, gearing type: automatic, Year of construction: 2007, operating hours: 21,826 h, Year of manufacture: May 2007 Nodpfxey T H Arj Akuowg Axle 1: left 18 mm right 18 mm Axle 2: left 6-6 mm right 6-6 mm Axle 3: left mm right mm

Condition: used, Atom G222 STVL Clicking Press, Bed Area 900 x 430mm, Top Platen Area 370 x 530mm. Serial No. 75161. Country of Origin: Italy Nwedpfx Ajy Shg Aokujg Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, functionality: fully functional, machine/vehicle number: 33524, mileage: 106,900 km, power: 265 kW (360.30 HP), first registration: 06/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 21.8 m³, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), power assisted steering, power mirror, seat heater, tachograph, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. 6-cylinder engine OM470, ABS, ASR, ESP, disc brakes, air-sprung rear axle, differential lock, level adjustment, steered trailing axle, daytime running lights, reversing warning sound, fuel tank 290 liters + 60 liters AdBlue Njdpfx Asy U Erbjkujwg Driver comfort seat, emergency braking assist, lane keeping assist, electric windows, camera rearview mirror, front mirror, sun visor, monitor, air conditioning, roof hatch, tinted windows, monitor, radio, hill-start assist, cruise control, speed limiter, central locking, parking brake, attention assist, stability control, and turning assist Work lights, rear area monitoring, stepboard locking, stepboard monitoring, bio-drain, all-round lights, central lubrication system, Zöller Delta-Premium 2301 bulk spreader

Condition: used, functionality: fully functional, first registration: 03/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, color: red, gearing type: mechanical, Year of construction: 1997, Equipment: differential lock, From our immediately available stock of used vehicles, we offer you: Fire Engine LF 16/12 on MAN 14.222 with Differential Lock General Data: • Year of manufacture: 1997 • Mileage: approx. 31,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.222 4x2 with differential lock and 222 HP • Diesel engine with manual transmission and power steering • Tow bar Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Holders for 2 breathing apparatus sets facing away from direction of travel • Auxiliary heater Body: • Manufacturer: Ziegler • LF 16/12 body in accordance with DIN • Two spacious side equipment compartments per side • Folding steps for side compartments • Mounts for standard equipment • Bracket for hose reel • Mountings for 2 additional breathing apparatuses Nwodpsxd Unbjfx Akusg • Storage for extension and hook ladders on the roof Vehicle pump / Extinguishing agent tank: • Ziegler FPN 16-8 centrifugal fire pump • Output: 1,600 l/min at 8 bar • Water tank: 1,700 l • Foam tank: 400 l Firefighting equipment: • Rigid quick-attack line (top of G6 compartment) • Roof monitor • Built-in foam proportioner Safety and Lighting: • 3 blue rotating beacons • Electronic siren system • Lighting for crew and equipment compartment • Additional spotlights • Optional hygiene board and reversing camera All details are stated to the best of our knowledge and belief; no guarantee for completeness or accuracy. This advertisement is intended solely for informational purposes and does not constitute an offer. Subject to prior sale!

Condition: used, functionality: fully functional, mileage: 15,000 km, power: 161.81 kW (220.00 HP), fuel type: diesel, fuel: diesel, color: red, Year of construction: 1993, Equipment: additional headlights, Tank Firefighting Vehicle TLF16/25 Chassis Mercedes Type 1222 Year of manufacture: 1993 Engine power: 220 HP (159 kW) Fuel: Diesel Transmission: Manual gearbox Drive: 4x4 Mileage: ≈ 15,000 km Water tank: 2,600 liters Cab Crew cab RAL 3000 Flame Red Connector configuration: 12V/24V Superstructure Ziegler Roof: walkable, slip-resistant Roof box Rapid intervention hose Pump FPN 16/8 Ziegler Lighting Scene lighting Equipment compartment lighting Pump compartment lighting Cab lighting Roof lighting Additional spotlights Equipment Compartments Three equipment compartments per side (left and right) 1 pump compartment (rear) Generous storage space Secure mounting of load Special Signaling System 2 blue rotating beacons Front strobes on the hood Martinshorn siren system Nodpfjwcykbox Akujwg Additional Equipment Rapid intervention system > with 50 m form-stable hose Battery maintenance system Scene lighting Illuminated controls Reversing camera Hygiene board on request Further equipment available on request. Please contact us for more information. We look forward to your visit in Berlin. All details provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!