Used Ryobi 525 Gxp for sale (433)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch Lrsdpfexf Up Ujx Aa Ror - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 158015, turning length: 550 mm, turning diameter: 300 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 575 mm, TECHNICAL DETAILS Turning Diameter: max. 300 mm Lredoxb Aizopfx Aa Rer Turning Length: max. approx. 550 mm Standard Turning Diameter: 276 mm Swing Diameter: max. 525 mm Distance Spindle Nose – Turret Face: 115 – 690 mm Travel X-Axis: 190 mm Z-Axis: 575 mm Counter Spindle Travel B: 585 mm C-Axis: 360° Main Spindle Speed Range: 35 – 4,000 rpm Drive Power: 22 kW Max. Torque: 351 Nm Spindle Nose: A2-6" Spindle Bore: 76 mm Max. Bar Capacity: 64 mm Chuck Diameter: max. 250 mm Counter Spindle Speed Range: 35 – 4,000 rpm Drive Power: 7.5 kW Max. Torque: 57 Nm Chuck Diameter: max. 150 mm Tool Turret Number of Tool Positions: 12 Tool Holder: VDI 40 Shank Diameter: 25 mm Drill Shank Diameter: 40 mm Turret Indexing Time: 0.2 / 0.6 s Driven Tools Speed Range: 25 – 4,500 rpm Drive Power: 3.7 kW Max. Torque: 35 Nm Feeds Rapid Traverse X/Z: 30 m/min Rapid Traverse C: 400 rpm Rapid Traverse B: 18 m/min Feed Range X/Z: 0 – 5,000 mm/min Feed Range C: 1 – 2,000 °/min MACHINE DETAILS Control: PC Fusion CNC 640 T Space Requirements & Weight Footprint: approx. 5.0 x 3.0 x 2.5 m Machine Weight: approx. 5.9 t Total Power Requirement: 34 kVA EQUIPMENT Documentation Chip Conveyor Coolant System Three-jaw Chucks 250 / 150 mm Tool Measuring Arm Driven Tool Attachment Extraction System 5x Fixed Tool Holders 2x Driven Tool Holders

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Lrodpfeyghwcjx Aa Ror Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: V00002513199, input current: 415 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, power: 400 kW (543.85 HP), Equipment: documentation/manual, type plate available, Exact type designation: VACON0100-3L-0416-7-ED-FLOW+SEBJ+IP54+EMC4+WT03+FL03+DLNL+CIFD+C CET000109+EMAT+GNUL+GADN INPUT: Uin:3~AC,525-690V, 50/60Hz, 415A OUTPUT: 3~AC,0-Uin, 0-320Hz, 416A Lredorwzr Ujpfx Aa Rjr POWER: 400kW:690V / 450HP:600V ° With TEST SEAL! ° Only 13 operating hours - according to the manufacturer over 100,000 possible! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 3 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: new, empty load weight: 116 kg, maximum load weight: 634 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,063 mm, loading space height: 320 mm, loading space volume: 0.9 m³, tire size: 155/70 r13, wheelbase: 1,499 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING ONLY! UT004045 Ljdeir H Rlspfx Aa Rorr Car trailer Garden Trailer 200 TILT with a tilting drawbar and a maximum permissible total weight of 750 kg. If you want to buy a new car trailer in our shop, you don’t have to worry about documents. The car trailer Garden Trailer 200 TILT is supplied with a tarpaulin in gray, a bow bar and a support wheel. The tarpaulin with the bow bar protects transported goods from rain, snow, wind and sun. This set includes: sturdy bow, waterproof tarpaulin and a round button for attaching the elastic cord. The frame of the trailer with additional cross members represents a very solid construction compared to other trailers. All trailer parts have been galvanized, which provides precise corrosion protection. The twisted design enables a very low total weight and thus a high load capacity. During the ordering process, please enter the desired permissible total weight of the trailer in the field "Notes for the shop" (as indicated in the vehicle registration document for light trailers). If you have any further questions, please contact us via online chat or telephone. When ordering a car trailer, please specify the permissible total weight of the vehicle that will tow the trailer. You can find the information on the permissible total weight on the last page of the vehicle registration document. Possible permissible total weight values: 300 kg, 350 kg, 400 kg, 450 kg, 499 kg, 500 kg, 525 kg, 550 kg, 575 kg, 600 kg, 625 kg, 650 kg, 675 kg, 700 kg, 725 kg, 750 kg. Shipping costs will be charged separately.

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 22 rpm -Power: 0.75 kW -Construction: B3 Ljdpfx Aasctq N Tj Rjrr -Diameter shaft: 35 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 525/225/H270 mm -Weight: 37 kg

Condition: good (used), functionality: fully functional, Item number: 1000003846 Manufacturer: TAF Overall dimensions: 1,845 x 525 x 140 mm (LxWxH) Width incl. cheek: 505 mm Cheek height: 140 mm Conveyor width: 450 mm Curve (degree): 90° Ledstt Sf Nepfx Aa Rjrr Roller type: Steel with plastic cover, conical Rollers per axle: 1 piece Roller length: approx. 500 mm Roller pitch, inside: 80 mm Roller pitch, outer: 130 mm Castor diameter, inside: 55 mm Roller diameter, outside: 90 mm Running direction: left in conveying direction Drive type: Motorised roller 24v, 2 pieces Control: EQube Ai P (24V binary control) Condition: Used / fully functional Function test: OK

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Lrsdpfx Aaoi Rppgs Ror Equipment: 1 set of tires, consisting of 2x 395/85R20, 4x 525/65R20.5, 2x 395/85R20 (80% tread remaining) and 4x 525/65R20 (2 tires with 80% tread remaining and 2 tires with 40% tread remaining). ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area Lrsdpfxjxxkd Us Aa Rjr # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: reconditioned (used), CAZENEUVE HB 575 x 1500 Lathe Distance between centers: 1,500 mm Center height: 250 mm Swing over bed: 575 mm Swing over cross slide: 525 mm Swing over carriage: 300 mm Spindle bore: 51 mm Tailstock taper: MT5 Max cross slide travel: 305 mm Number of spindle speeds: 18 Lrjdpfx Aajx Ebwfj Ror Power: 10 Hp Spindle speed: from 32 to 1,600 rpm Electrical cabinet Dimensions (L x W x H): 2,905 x 1,175 x 1,345 mm Weight: 2,050 kg New Heidenhain DRO Multifix tool post – Fixed steady rest New 2-axis Heidenhain DRO

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Turret indexing time: 0.2 s Toolholder: VDI 30 Lrsdpfx Aajxgglko Rjr Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. Lredsxhgd Nopfx Aa Rer High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: new, Incl. ramp & door combination / parabolic suspension / dividing gates / spare wheel / top ventilation / bottom ventilation Technical Specifications: • Brand: Ifor Williams • Model: TA5 HD • Vehicle type: Livestock trailer • Vehicle condition: New vehicle • First registration: None • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 372 x 156 x 183 cm • External dimensions (LxWxH): 525 x 207 x 234 cm • Loading height (floor): 42 cm • Perm. gross weight: 3,500 kg • Unladen weight: 1,057 kg • Payload: 2,443 kg • Chassis: Low loader (wheels beside the body) • Tyres: 175/75R16C • Suspension: KNOTT parabolic suspension • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Reinforced, bolted V-drawbar • Very robust welded steel frame • Frame hot-dip galvanized by total immersion • Multiple crossmembers for high point load capacity • Floor made of pressure-treated wooden planks with 2 mm thick aluminium tread plate • Aluminium side panels • Split access door, left in direction of travel • Interior light • Heavy-duty, hot-dip galvanized frame assembly • Heat-reflective roof • Lateral ventilation openings at roof level • Additional lateral ventilation at the bottom • 2 rear side struts for extra stability • Rear tailgate made of aluminium with integrated step strips • Tailgate with ramp-door combination (switchable between full ramp and individual wing doors) • Rear dividing gate on the ramp made of swivelling aluminium • Parabolic axle suspension by KNOTT for maximum driving comfort • Large 16-inch wheels for optimal road holding • Spare wheel with carrier • Automatic reverse function • KNOTT overrun braking system and parking brake • Lockable coupling head • 13-pin plug with spiral cable • Reversing lights • Oversized safety lighting • Integrated rear fog lamp • Spare wheel with bracket • Centrally mounted jockey wheel Optional accessories on request: • Internal cross partition (as seen in images, at extra cost) • Reversing lights • 100 km/h approval with shock absorbers • and more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration documents can be sent in advance, or temporary plates (within Germany) can be supplied - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been authorized dealers and workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands - Errors, omissions and prior sale excepted - Lrjdpfx Aajx Sxiho Rjr

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus Lrsdpfx Aowix E Roa Ror c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Condition: used, Year of construction: 2003, Format: 750 x 600 mm (29.53 Zoll x 23 Equipment: Ryobi PCS-H Printing Control System Ryobi RPC Semiautomatic Plate Changer Ryobimatic AAC Dampening Lredpfx Ajy Agg Aea Rsr Automatic blanket cleaning device

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Lredjzqhgdjpfx Aa Rer Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Lrjdjwzvzmjpfx Aa Ror

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, We offer this very good RYOBI 522HE offset printing press, year of construction 2004. Semi auto plate loading, One owner from new. Very clean machine. If you have any questions or need more information, feel free to send us a message or give us a call. Lrjdpfx Aaoywaq Re Rsr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, PCS-G control desk, IVS - Ink Volume Setting, Grafix dry spray > RYOBIMATIC dampening system, Ryobi RPC semi-automatic plate change > Preset - automatic size device > Suction feed board > Automatic blanket, roller and impression-cylinder washing device > High pile delivery, non-stop delivery Technotrans LED UV dryer Lrodpfx Ajy Hx Imsa Ror Interdeck between 1st and 2nd unit 45 million

Condition: used, technical details: new parts special accessories original parts machine Ryobi mm Big stock of new and original Ryobi parts for all offset presses Ledpfx Aaswmga Ds Rsrr Just asking for with spare parts number and model of the machine Big Discount possible!

Condition: used, Year of construction: 1999, Format: 520 x 375 mm Equipment: Min. sheet size 100 x 150 mm Lrjdpfx Aezi D Inja Rjr Max. printing area 505 x 350 mm Up to 13,000 (in some cases up to 15,000) sheets per hour Paper thickness 0.04 to 0.4 mm (maximum 0.5 mm) Plate size 510 x 400 mm (or 510 x 430 mm) Machine weight approx. 7,000 kg PCS-H control system Ryobimatic dampening system SAPC (Semi-Automatic Plate Change) Automation: Typically equipped with an automatic blanket and roller washing system. Delivery Techtrans New

Condition: used, Year of construction: 2003, Offset 2 color Ryobi 522HE Year: 2003 Number of impressions (mio): 21 Machine control - Lateral and diagonal register adjustment - Size adjustment by means of pre-programmed sheetstop Feeder - Streamfeeder - Double sheet control Printing units - Number of printing unit(s): 2 - Straight machine - Ryobi RPC semi automatic plate change - RyobiMatic dampening - Impression cylinder with double diameter - Automatic inking roller washing device - Cooling system: Technotrans alpha.d Delivery - Powder spray - Anti static device Accessories - Chromed cylinders Max. output (s/h): 11000 Max. sheet size (mm): 520 x 375 Min. sheet size (mm): 100 x 105 Max. print size (mm): 505 x 350 Lsdpfjxzppzjx Aa Rorr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 131703-100, clamping force: 1,500 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1,866 bar, injection weight: 358 g, mold height (min.): 250 mm, ejector stroke: 160 mm, opening stroke: 600 mm, plate length: 740 mm, plate width: 740 mm, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,100 kg, heating capacity: 13.9 kW (18.90 HP), pressure: 210 bar, pump power: 22,000 W, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 88 A, Type: Hydraulic Injection Molding Machine Lodpfx Asyw Uchsa Rjrr Model: HM 150/525 Max. Motor Rated Current(Largest MTR FLA): 40 A Control Voltage: 24 V DC Rated Voltage: 400 V (3-phase) Rated current: 88 A Max. fuse rating: 100 A Frequency: 50 Hz Short-circuit rating(SCCR): 6 kA Year of construction: 2010 Weight: 6100kg Control system: Intergrated Battenfeld control with touch-screen panel Manufacturer: Wittmann Battenfeld

Condition: excellent (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 1439, Size 36 x 52 cm, standard dampening, N+P unit Ledpfx Aasx I A Rue Rorr

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: 3921, The machine is defective. The machine body and some of the attached components are in good condition. The machine will be sold as is, from its current location. Ledpfx Ajzcp Diea Rsrr Price upon request.