Used Sacmi Opera 400 for sale (18,111)

Condition: good (used), ZMM SLIVEN CU 400 Control and lead screw lathe Distance between centers 1,500 mm Distance between centers 250 mm Turning diameter over bed 500 mm Turning diameter over slide 240 mm Spindle bore 72 mm 27 spindle speeds from 20-2,000 rpm Feed rate Y-axis 0.04-12 mm/rev Feed rate X-axis 0.02-6 mm/rev Travel X-axis 315 mm Fjdpfxozi Nz To Aptspi Motor power 7.5 kW Machine weight approx. 3,000 kg Equipment: Digital display MITUTOYO Tool holder 6 tool holder inserts 3-jaw chuck 250 mm All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories explicitly listed here, in the order confirmation, and on the invoice. FCA (Free on Truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon completion of purchase

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 759 kg, maximum load weight: 2,741 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 1,822 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, Martz Bau-3 400/3 S 3.5T NEW VEHICLE Internal dimensions: 400cm x 182cm Side board height: 30cm Loading area height: 40cm Total weight: 3500Kg Payload: 2741Kg Braked 3-axle trailer Overrun brake and parking brake by AL-KO 3x 1350Kg axles Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side boards 15mm thick, non-slip and robust screen-printed wood floor Automatic jockey wheel with 400Kg support load 12 lashing points with 600Kg tensile force, also on the front Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector Front marker lights Rear lights with reversing light and triangular reflector Vertical loading ramp incl. lifting aid (gas spring) Shovel holder Walkable steel fenders OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Anti-theft device - Fine or coarse mesh net Further accessories available upon request! Plus freight to Gera and vehicle registration document 315 € net Images are for illustrative purposes only and may show optional accessories that incur an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide selection of rental trailers with us. Visit us online or come by directly! Fpedpfx Ajzk H T Njptei

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, axle configuration: 4x4, load capacity: 400 kg, mast type: other, lifting height: 18,450 mm, platform length: 2,400 mm, platform width: 900 mm, overall weight: 8,930 kg, fuel type: hybrid, color: red, Equipment: all wheel drive, Articulated telescopic work platform AIRO A18 JRTH 400 Plus with battery-powered hybrid system Technically in fully functional condition. Optically as shown. - All-wheel drive / all-wheel steering - Oscillating axle - Differential lock Year of manufacture 2022 Max. working height 18.45 m Max. height during travel 18.45 m Max. lateral reach 9.80 m Max. load capacity 400 kg Fjdpfx Ajyf Hfvoptjpi Basket rotation +/- 90° Max. climbing ability 22° Transport dimensions L/W/H 7.08 (5.00) / 2.20 / 2.41 (2.80) m Drive: Battery-powered hybrid, 4x4 all-wheel drive Color: red Special features: Large work basket 2.40 x 0.90 m, supercharger, bright off-road tires UVV inspection performed upon purchase, new! Available from stock in Langenhagen All information regarding the offered machine is without guarantee. Typographical errors / errors / prior sale reserved.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 91,550 h, clamping force: 400 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2001. This Arburg 270 S 400-60 features a screw diameter of 25 mm and an additional cylinder suitable for Teflon processing. The machine is in working condition, with 98,077 pump hours and 91,550 automatic hours. If you are looking to get high-quality moulding capabilities, consider the Arburg 270 S 400-60 machine we have for sale. Contact us for further details. • Machine Pump Hours: 98,077 h • Automatic Hours: 91,550 h • Screw Diameter: 25 mm • Additional Cylinder: 25 mm (suitable for Teflon processing) Fedpozkh Rvofx Aptjpi • Clamping Unit: Closes without damping • Condition: Machine in working condition

Condition: good (used), mileage: 168,871 km, power: 100 kW (135.96 HP), first registration: 03/2021, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,100 mm, total width: 2,070 mm, total height: 2,500 mm, loading space length: 3,530 mm, loading space width: 1,760 mm, loading space height: 1,890 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, unladen weight: 2144 kg, gross vehicle weight: 3500 kg, trailer hitch, cabin type: single cab, air conditioning, number of airbags: 1, parking assistance: None, electric windows, electric mirrors, partition, radio/cassette, color: white, heated mirrors, rear view camera, lighting type: halogen lamp, Bluetooth, engine power: 100 kW (134 hp), fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: additionally extended, side paneling, roof rack: None, side doors: 1, rear closure: double door, central locking, seats: 3, seat arrangement: 1+2, seat covering: fabric, seat adjustment: manual, L3H2, air conditioning, tow bar, 168,000 km, spare wheel, tire type: summer tires = Further information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 225/65R16 Brakes: disc brakes Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 3 mm; Suspension: coil spring Fodeziuvvspfx Aptopi Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm; Suspension: leaf spring Weights Unladen weight: 2,144 kg Payload: 1,356 kg GVW: 3,500 kg Functional Loading area height: 59 cm Maintenance APK (Technical Inspection): valid until 07/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €194 per month (delivery van, 72 months); Please inquire for more information and conditions.

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. Fjdpfx Ajt Hw S Usptspi • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Fpsdpfxjt Hww De Aptei Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1996, turning diameter 400 mm turning length 915 mm control NUM Type 1062 T total power requirement 12,5 kW weight of the machine ca. 5500 kg Fpsdpfot Hw Szjx Aptei dimensions of the machine ca. m

Condition: used, Year of construction: 2000, O F F E R We can offer you, without obligation and subject to prior sale and errors, the following ex stock: Fpedpfx Aewugmtsptji H U G O – B E C K Flow Wrapping Machine Type FLEXO 400 Year of manufacture: approx. 2000 Serial no. 12131 _____ Working height: 850 mm Product dimensions: 55-400 mm width 2-150 mm height 80-unlimited mm length Max. output: 20 m/min 60 cycles/min Machine length: 2000 mm Machine width: 1450 mm Connected load: 3 kW Packaging films: PP, PE, Polyolefin Weight: 650 kg Machine dimensions: 2,140 x 1,450 mm Accessories / Special equipment: • Cross-sealing unit with permanently heated profile sealing element for long service life and secure seals • Side sealing unit, mechanically controlled, permanently heated sealing element for stable seals • Extremely short changeover times without tools • User-friendly control elements • Compact footprint We would also like to point out that, if interested, we have similar packaging machines in stock on site! Condition : Very good Please click here shortly for a video of the machine: Delivery : Ex stock - as inspected Payment : Net - after receipt of invoice

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 total power requirement 15 kW weight of the machine ca. 6000 kg Fedpfst Hw Hxsx Aptopi dimensions of the machine ca. m

Condition: used, Year of construction: 1973, max. wheel diameter 400 mm gear width 75 mm Fpsdpfxst Hw Hls Aptsi total power requirement 25 kW weight of the machine ca. 7000 kg

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Fpedpfx Ast Hwnvoptei Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Fsdpfx Aoziw Nxsptjpi Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: like new (used), Year of construction: 2022, operating hours: 12,000 h, We are offering this machine for sale due to a cancelled order. Screw: 40mm / HC version! Core pulls: 2x Blow-out: 2x Selective extraction unit Tool heating: 12x Fodpfezi A Ugjx Aptjpi Includes Multilift Select 4x vacuum 4x pressure

Condition: new, functionality: fully functional, empty load weight: 369 kg, maximum load weight: 1,131 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 401 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Unilader 400 C 1.5T NEW VEHICLE Internal dimensions: 401cm x 184cm Total weight: 1300 kg Payload: 1131 kg Braked single-axle low-loader 1500 kg KNOTT axle with overrun brake, reversing automatic, and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust and non-slip screen-printed wood floor 13-pole electrical system Plastic mudguards Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light, NSL (no speed limit) and triangular reflectors Foldable license plate holder 2x U-shaped chocks Optional accessories: - 100 km/h upgrade - Rear supports - Steel side panels, 40cm - Extension side panels - Grid superstructure - Drive-on rear tailgate - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Flat tarpaulin with or without bows - High tarpaulin - Coarse or fine mesh net - Spare wheel with bracket Further accessories available upon request! Images are for illustrative purposes and may show optional accessories that incur an additional charge. Plus vehicle registration document and shipping to Gera: €150 net. Fpodpfozkrmhsx Aptji Haven't found the right trailer yet? We have 50-100 vehicles in stock, ready for immediate pick-up. The workshop is open from 8:00 AM to 5:00 PM on weekdays for all types of repairs. Specialist in axle repair, including for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H Cold Circular Sawing Machine (completely overhauled) - max. cutting width: 4 mm - saw blade mounting, bore: 50 mm - number of mounting screws: 4 - pitch circle of mounting screws: 80 mm - saw blade feed speed: 0 - 3000 mm/min - rapid traverse: 4500 mm/min - adjustment range of the workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - rotary table adjustment, manual, stepless: 90 degrees This is a completely overhauled machine. Fpjdpfx Ajy Dcqyjptsi Configuration: Metering system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring device L45D Note: the item must be collected between July 7th and 9th, 2026, on a date to be confirmed. FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade arbor: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles, horizontal 45°: 220 x 60 mm - Profiles, vertical 45°: 80 x 120 mm - Saw motor: 3.7/4.5 kW - Cutting speed: 1750/3500 m/min - Saw blade feed: 0 - 3700 mm/min - Rapid return of saw blade: 4500 mm/min Additional equipment: - Workpiece clamping with short-stroke clamping cylinder: stroke 8 mm - with hand crank for pre-setting - Machine completely overhauled and newly painted - Horizontal clamping cylinder at the front, per piece - Minimal lubrication instead of coolant mist spray device - Infeed roller conveyor T3 with rollers 60 x 289 mm - one starting section: 2000 mm, with 5 rollers, one foot, one mounting angle Fpodpfjy Dcu Ejx Aptei - one extension section: 2000 mm with 4 rollers, one foot, one guide roller, adjustable as a guide for material bars - Length measuring device including discharge roller conveyor T3 Note: the item must be picked up between July 7th and 9th, 2026, on a date to be determined. FCA D-73235 Weilheim Teck - loaded onto a truck

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Becker KDT 3.140/0-400 dry-running rotary vane compressor / displacement pump For sale is a Becker KDT 3.140/0-400 dry-running rotary vane compressor / blower, manufactured in 2008, in general overhauled, used condition. The compressor operates dry and uses self-lubricating vanes made of graphite composite. This eliminates the need for oil changes and reduces maintenance requirements. Technical data according to the nameplate: Fpsdpfx Aetpgxzjptei Manufacturer: Becker Model: KDT 3.140/0-400 Machine No.: D 2319867 Year of manufacture: 2008 Power: 6.7 / 8.2 kW Frequency: 50 / 60 Hz Speed: 1450 / 1740 rpm Volumetric flow: 129 / 153 m³/h Operating pressure: 1500 mbar / 1.5 bar Weight: approx. 176 kg Dimensions: approx. 930 × 550 × 450 mm

Condition: used, functionality: unexamined, Ferwood Code: RU0011481 - Manufacturer Code: 6EP1436-2BA10 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - EDGE BANDER - PANEL SAW BIESSE ROVER - BIESSE STREAM - SELCO - If interested we offer an overhaul service, contact us. Fedpfx Asv I A R Noptspi

Condition: used, functionality: unexamined, Ferwood Code: RU0012093 - Manufacturer Code: 6ES7400-1TA01-0AA0 - Condition: Used - Functionality: Not tested - Compatible Machine: HOLZMA panel saw - If interested, we offer a refurbishment service, please contact us. Fjdpfx Ajzipq Ueptopi

Condition: used, functionality: unexamined, Ferwood Code: RU0005878 - Manufacturer Code: 6EP1437-3BA00 - Condition: Used - Functionality: Untested - Compatible Machine: - Weight: 4 kg - Dimensions: 36x26x21 cm - If interested, we offer an overhaul service. Please contact us. Fpodpjyz T Uksfx Aptei

Condition: used, Year of construction: 2002, Saw unit: swiveling 45° Carriage length: 3200 mm Max. saw blade diameter: 400 mm Saw blade bore: 30 mm Motor power: 7.5 kW Speeds: 3000/4000/5000 rpm Max. cutting width: 1300 mm, input via keyboard Control panel: at eye level, with Easy control system Height adjustment: input via keyboard Swivel adjustment: input via keyboard Swivel angle display: digital Cutting width display: digital Guide: double roller carriage, steel Stop: scale adjustment Scoring saw: manual PSV protective guard: Yes End position locking: Yes Automatic motor brake: Yes Description: On/off switch on the saw carriage Fsdpfszktp Rex Aptepi Weight approx.: 1115 kg Dimensions: 3200 x 1800 x 1900 mm Dust extraction diameter: 1 x 80, 1 x 120 mm Location: Nattheim

Condition: excellent (used), Year of construction: 2006, operating hours: 11,773 h, functionality: fully functional, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, spindle bore: 51 mm, mount diameter: 30 mm, overall weight: 3,000 kg, CNC lathe DMG NEF400 Year of manufacture: 2006 Control system: Siemens 840D Turning diameter: 350 mm Turning length: 650 mm Spindle bore: 51 mm 8-position tool turret Coolant system Fedpfxezk T Nko Aptspi Chip conveyor Machine documentation Includes chuck and a set of hardened jaws VDI 30 Maximum spindle speed: 4000 rpm Sale is only to commercial businesses, without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards Fodpfx Apjlar Rijtspi - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: excellent (used), functionality: fully functional, mileage: 669 km, power: 294 kW (399.73 HP), first registration: 06/2023, fuel type: gas, empty load weight: 9,350 kg, maximum load weight: 9,294 kg, overall weight: 18,644 kg, axle configuration: 4x2, wheelbase: 38,000 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 4,550 mm, loading space width: 2,400 mm, Year of construction: 2023, Equipment: differential lock, full service history, hill-start assist, lane keeping assist, retarder, seat heater, trailer coupling, Iveco S-Way 400/Meiler/CNG/Natural Gas/Leaf Spring Suspension/Trailer Coupling • Manufacturer: IVECO • Type: S-Way 400 • NEW PRICE from €210,000 • Mileage: 669 km • First registration: 06.2023 • Power: 294 kW / 399 hp • Transmission: Automatic • Body: Meiler three-sided tipper • Loading area: L: 4.55 meters x W: 2.40 meters • CNG/Natural Gas Fpsdpfx Apjzavzcstoi • Wheelbase: 3.80 meters • Retarder • Air conditioning • Cruise control • Hill start assist • Lane keeping assist • Starting assist • Differential lock • Hands-free system • Tachograph • Roof hatch • Heated seats • Trailer coupling – Duo-matic and standard connections • Trailer hydraulics • Automatic lights • Heated side mirrors • Xenon lights • Euro: 6 • Unladen weight: 9350 kg • Payload: 9294 kg • Permissible total weight: 18644 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.