Used Sanding Machine For Turned Pieces for sale (74,591)

Condition: used, total length: 1,700 mm, total width: 1,200 mm, total height: 1,700 mm, overall weight: 600 kg, grinding belt length: 3,000 mm, grinding belt width: 200 mm, power: 4 kW (5.44 HP), No. 04535 Two-sided edge sanding machine HÖFER BSM V pn / BSM 5 pn Used Double-sided edge sanding machine Drive motor 4 kW Oscillation motor 0.75 kW Belt speed 22 m/s Pneumatic belt tensioning Pneumatic height adjustment Belt dimensions 3000 x 200 mm Front sanding table 900 x 400 mm, pneumatically tiltable up to 45° Rear sanding table 900 x 400 mm, with veneer edge sanding device Transport dimensions approx. 1700 x 1200 x 1700 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Ledpfxjzg Itvj Aa Rsrr Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm Ljdjvxkv Ujpfx Aa Rerr - Workpiece height max.: 150 mm - new exhibition machine -

Year of construction: 2009, condition: excellent (used), I sell the widebelt sanding machine RWT BS950RP, year 2009. Configuration: Hard rubber cylinder Lsdpoiuc Sgofx Aa Rjrr Combi unit soft rubber cylinder + pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Equipment and technical data: with 2 combination units with 2 contact rollers, 1 x 65° Shore, 1 x 85° Shore and 2 air sanding shoes Sanding width 1350 mm Sanding belt dimensions 1360 x 1900 mm Workpiece thickness max. 150 mm 1st unit with 15 kW 2nd unit with 15 kW Ljdpfx Aey Dkhgoa Rerr Cleaning brush Roller table at the infeed Roller table at the outfeed Infinitely variable feed rate from 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Wesetslintner edge grinding machine, model KSMO-1, with a grinding belt length of 2600 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical data: - Belt length 2600 mm - Table area 930 x 330 mm - Motor with 2.2 kW / 3 HP - Belt width 150 mm - With oscillation - Dust extraction connection 120 mm - Weight 270 kg - Robust design Lrjdpfxszl Ti To Aa Rsr - Made in Austria - Free delivery within Austria The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, edge grinding machine, edges, KSM, KSM 260 Reference: A0117-9998

Condition: used, Year of construction: 2008, machine/vehicle number: 147233, Ref. no. 20312 Technical Data: - Workpiece thickness: 0.8 to 51 mm - Max. working width: 1370 mm - Max. grinding height: 100 mm - Grinding diameter: 150 mm - Grinding speed: 1720 rpm Lredpfx Aaeylylie Rjr - Feed rate: 3.7 m/min - Drive: 400 V / 9.7 kW - Working height: 1100 mm - Space requirement approx.: W 1700 x H 1200 x D 1200 mm - Weight approx.: 800 kg - Separate mobile motorised grinding dust extraction unit

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec Ljdped R Ev Dsfx Aa Rjrr • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set Lredpfx Aoyz Imzoa Rsr -Manufacturer: Kahaco, Adjustable machine reamer, 6 pieces -Diameter: Ø 24/26/31/32/33/38 mm -Recording: MK3 -Submission/Price: complete -Transport dimensions: 380/180/H45 mm -Weight: 6.8 kg

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Lredpfeubyy Nox Aa Rjr

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Lredpfjy Ehiwox Aa Rsr Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, Maximum turning diameter 2800 mm Maximum swing diameter 3000 mm diameter of spindle flange 1100 mm control Siemens 840 D sl Table rpm 230 1/min Maximum speed of driven tools 6000 1/min x-travel 2700 mm z-travel 1000 mm Feed - X 24 m/min feed capacity - x 22 kN tool taper CAPTO C8 Ljdpezf Np Njfx Aa Rorr total power requirement 200 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 120 t Equipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: used, Year of construction: 2021, turning diameter max. 2.800 mm diameter of spindle flange 1.100 mm max. swing diameter 3.000 mm control 840 D sl Siemens turning speed range - main spindle max. 230 min/-1 power capacity - main spindel 206 kW max. Torque 53.000 Nm tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm workpiece diameter at full load 150 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm tool taper Capto C8 x-axis 1: 2.700 mm x-axis 2: 2.700 mm z-axis ( 2x 1.000 ) mm rapid traverse X: 40 / Z: 24 m/min feed power X/Z: 22 kN total power requirement 200 kVA weight of the machine ca. 120 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC Vertical Turning Machine PITTLER - PV 2500 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option Lodpfx Aaeyrhlwo Rjrr - 12-Jaw Compensating Chuck RÖHM - Retractable Steps - Coolant Circulation - Coolant Conditioning - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Variable Speed ??Range to Reduce Vibration - Air Purifier, Electrostatic Dispersal - Touch Probe for In-Process Workpiece Measurement - Walk-in Work Area

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in Lredpfx Aast Tqy Es Rsr heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, -Model: Regamat R92 -Manufacturer: Winkler -Serial No.: 52217 Lodpewydabefx Aa Rsrr -5-row dough molding machine Ndey Tdxujwydabsgja -Ready for weighing: 35–85g -Voltage: 400V -Power: 2.8kW -Year: 2000

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change tool holder Lodpep E Hz Nofx Aa Rorr -Turning tool holders: Tool holders 43 pieces -Tool holders: various designs -Inset prism: 110/94 mm -Dimensions: see photos -Sale/Price: complete -Transport dimensions: 1200/800/H200 mm -Weight: 450 kg

Condition: used, Year of construction: 2003, Technical details: Ledszcnq Ijpfx Aa Rorr weight of the machine ca.: 9,5 t

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-cutter 10 end faces 4 chamfers 2 water jets Calibration support Lrjdpfx Aaezpy Drj Ror Belt feed direction from left to right

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg Lrjdpfeu R Tbhjx Aa Rer

Condition: used, Year of construction: 2014, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ Lrodpfxsxrb Rfs Aa Rsr - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 2001, swing diameter max. 450 mm chucking diameter 400 mm control Siemens 840D (Index) Max. rpm 4.200 min/-1 power capacity - main spindel ( 35,5 / 56 ) kW max. Torque ( 340 / 550 ) Nm C-Axis 0,001 ° number of toolpositions 2x 12 pos driven statition 2x 12 pos worktool system VDI 30 max. spindle speed driven tools 6.000 U/min. power capacity - driven tools 9,5 kW max. Torque 40%: 19 Nm Y - Axis +/- 90 mm B-Axis +270° / -90 ° x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm b-axis +270° / -90 ° rapid traverse X: 40 / Z: 30 m/min numbers of pallets 24 pos. size of pallet 410 x 300 mm max. workpiecediameter 300 mm max. workpiece weight incl. Pallet: 25 kg Chain width 75 mm band speed 7,5 m/min total power requirement 56 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 8,5 x 6,0 x 2,7 m CNC - Vertical Lathe Lrsdpfx Aajyq Sk Ij Ror INDEX - V 300 Y/B - incl. 24 pos. palett changing system Schnaithmann - incl. ball screw as spare part - incl. 39x driven tools - incl. 39x tool holders

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117 Lrsdpfowudkijx Aa Rsr

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm Ljdpfetpq Urox Aa Rerr control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, *

Condition: used, Year of construction: 2004, machine/vehicle number: 59274, type of input current: AC, input voltage: 230 V, disc diameter: 150 mm, FRANK Surface Grinder GECKO S Technical data: • Motor voltage: 230 V • Motor power: 1,500 W • Grinding disc diameter: 150 mm • Weight approx. 6 kg Lrsdpfxeycuy Ns Aa Rer The machine has been overhauled in our workshop and is fully operational. The machine is supplied including power cable and dust bag. Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Condition: new, Year of construction: 2026, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Ledsw H Rdmepfx Aa Rjrr Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Lrodjygmdbjpfx Aa Ror