Used Schauenburg Cyclone for sale (234)

Condition: used, mileage: 690,000 km, power: 315 kW (428.28 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, * Mercedes Arocs 1843 SZM * First registration: 2016 * 690,000 km * Euro6 * 4 x 2 * Leaf spring - air suspension * Air conditioning * Navigation system * Automatic transmission * 3-stage engine brake * Tipping hydraulics * Aluminum rims * Wheelbase: 3.60 m * Unladen weight: 7,542 kg ---- Ledpfjzi Ighsx Agtohk Special equipment: Audio-navigation system with Bluetooth connectivity, exterior mirror on the right with maneuvering position, battery 220 Ah, CB radio, compressed air tank made of aluminum, air horns (2) on the cab roof, hydraulic oil tank 200 L, aluminum, right side, interior filter for construction site vehicles, fuel tank: 290 L, aluminum, left side, light alloy rims 11.75x22.5 (ALCOA Dura-Flange polished, on the front axle), light alloy rims 9.00x22.5 (ALCOA Dura-Flange polished), air intake behind the cab, air filter: cyclone air filter, air compressor 2-cylinder, reinforced engine brake, reinforced engine compartment encapsulation, auxiliary drive MB 131-2c, configurable special module, frame lowering with airbag residual pressure control, reversing warning signal (acoustic, external), fuse box, seats in the cab: driver's seat, comfort suspension seat, sun visor, exterior, sun blind for side window, driver's door, voltage converter 24V / 12V 10 A, splash guard front, 12V socket in the co-driver's footwell, 24V / 25 A socket in the co-driver's footwell, underrun protection front, preparation / switch for lift axle on the semi-trailer / trailer, preparation for reversing camera, preparation for cooler box / refrigerator, additional thermal insulation, auxiliary heater (water). Additional equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, work lights, Arocs, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air unit medium, cab: width 2.30 m, cab: movable cab entry, cab: tilting mechanism hydraulic, cab: L ClassicSpace, cab floor with engine tunnel 170 mm, suspension: leaf spring / air suspension, suspension: front springs 7.5 t, 3 leaves, electric windows, windshield tinted, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 L, lifting roof manual (steel), rear axle bevel gear 440, information display 10.4 cm, interior filter: pollen filter, body / structure: semi-trailer tractor, body variant: standard, comfort bunk lower, mudguards 3-piece, steering power pump unregulated, air intake from the front, air dryer heated, engine 10.7 L - 315 kW R6 diesel (OM 470), wheelbase 3600 mm, ramp mirrors, waste heat recovery, disc brakes with partial protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: co-driver functional seat, stabilizer front axle, socket in the cab 24V, tachograph / EU control device, preparation for toll collection, front axle straight, permissible total weight 18.00 t

Condition: used, Plant for preparing malt, followed by weighing prior to milling. The system comprises the following main components: - Cyclone - Dust collection bag, mounted on a metal frame with 4 legs - Malt distributor - Malt conveyor - Cleaning unit comprising a flat sifter and a polishing machine (Künzel, 1967) - Magnet for metal separation (Künzel, 1967) - Malt discharge weighbridge (Chronos, 1962) (20 kg per tipping cycle) - Analogue scales, freestanding, measuring range up to 36 kg - Special explosion protection vacuum cleaner (Kärcher) - Control cabinet Additional title: malt processing and weighing plant; built between 1962 and 1967 Lhsdpeziy S Aofx Agtok Capacity: 1200 kg/h Features: Cyclone; dust collection bag; malt distributor; malt conveying; plan sifter; polishing machine; magnet; discharge scale; analogue scale; vacuum cleaner

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Lhsdpfjzg Nakox Agtok Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technological line of the Polish brand BRODPOL for sawing medium-sized logs with a length from 1,800 to 3,000 mm and a diameter from 120 to 480 mm Year of production: 2023 Technical condition: very good Ljdsziqnuopfx Agtjhk The line consists of the following machines and devices: 1. Log magazine/feed conveyor with inclined discharge, type PKS 2200/2912 Year of production: 2023 2. Driven prism-shaped accelerating table, length 5,000 mm, equipped with a pneumatic log discharge mechanism Year of production: 2023 3. Driven prism-shaped accelerating table, length 4,000 mm, equipped with a log turning mechanism Year of production: 2023 4. Chain-fed circular saw unit TT5/700/480 G Year of production: 2023 5. Receiving roller table with separating plates, “bag” type, length 7,000 mm Year of production: 2023 6. Centring table SC 8000, equipped with a mechanism for stopping one cant Year of production: 2023 7. Double-spindle multi-rip saw WP 220 Year of production: 2023 8. Central belt conveyor, length 38,000 mm, belt width 500 m Year of production: 2023 Additionally, the line includes a waste receiving system with an MDR metal detector and a MADREW RK 650x200 chipper from 2021, as well as a dust extraction installation with a JKF cyclone dedicated to this line. Assembly and start-up of the line are available for an additional fee

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm Lhsdpfxezht H Re Agtok • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: excellent (used), mileage: 444,759 km, power: 250 kW (339.91 HP), first registration: 05/2009, fuel type: diesel, tire size: 385/55 R22.5, axle configuration: 6x2, wheelbase: 4,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 2, total length: 9,400 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2009, Equipment: differential lock, Superstructure Construction year: 2009 Volume: 15 m3 Tank capacity: 1500 liters Vacuum pump: Delta, 3000 m³/hour The wastewater tank: 15,000 liters The cyclone tank: 1,500 liters The cooling water tank: 1,500 liters. = More information = General information Cab: single Registration number: BV-ZH-79 Technical information Number of cylinders: 6 Engine capacity: 11.705 cc Drivetrain Lhsdpfxozg Hdto Agtsk Make of engine: Scania Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/55 R22.5; Steering; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Suspension: air suspension Rear axle 2: Tyre size: 385/55 R22.5; Lift axle; Steering; Suspension: air suspension Weights Empty weight: 15.265 kg Carrying capacity: 12.735 kg GVW: 28.000 kg Functional Water tank: 2.300 l Tipper: Back Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Ljdezcf Dljpfx Agtohk Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Lhodpjvbdyxsfx Agtek Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2010, operating hours: 0 h, condition: like new (used), This used rotary feeder served only for spare parts storage for a foreign project and was therefore never in use. The rotary feeder therefore has no operating hours and is in mint condition. The used rotary feeder with square inlet is suitable for controlled feeding and dosing of powdered and granulated bulk materials from silos, hoppers, pneumatic conveying systems, filter systems and cyclones. Name: Used Rotary Valve Manufacturer: Sunds MDF Type: LAF-200 Year built: 2010 Material: regular steel Lhedpfx Agegw A Etjtok Driving force: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Technical documentation: no Message: inlet L: 1980 mm x W: 1180 mm, outlet L: 2180 mm x W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in mint condition. Price: on request

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Lhjdpfeixt H Nox Agtek Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: used, AZO GmbH E360 A2 AL screening machine, centrifugal screen Equipped with a dosing gate and cyclone Material: Aluminium/Steel Optional: available with various spare parts Excluding electrical control 2 units in stock Lsdpfezc N A Eox Agtehk See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2021, operating hours: 902 h, functionality: fully functional, Screw compressor Kaeser SM13T-SFC, year of manufacture 2021, operating hours under load 902, 8 bar SC2 400 V/50 Hz, effective delivery rate at 7.5 bar: 0.39 - 1.4 m³/min, rated power of drive motor: 7.5 kW, dimensions W x D x H: 630 x 1,090 x 1100 mm, weight: 325 kg, with integrated refrigerant dryer, cyclone separator, pressure maintenance system, frequency converter, Aquamat CF6, with Kaeser PTG heat recovery and ventilation system, serial number 3980-8175361. Lodpfx Agezd R Sietehk

Condition: excellent (used), Year of construction: 2021, operating hours: 190 h, functionality: fully functional, Screw compressor Kaeser SX 3, year of manufacture 2021, operating hours under load: 190, 8.00 bar, SC2 400 V/50 Hz, effective delivery rate at 7.5 bar: 0.34 m³/min, rated power of the drive motor: 2.2 kW, dimensions W x D x H: 590 x 632 x 970 mm, weight: 140 kg, serial number: 1136-8192796, cyclone separator, manuals available. Ledpfx Aszd R R Sogtehk

Condition: new, Year of construction: 2026, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Lsdjq Sp Evepfx Agtohk Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Lhodpfxov I S T Ts Agtek Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, Lhedpfx Agsv I Tuxetek wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Year of construction: 2025, condition: new, ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with a hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in a single, compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions Lhsdpfx Agjv I S U Rjtek The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: used, maximum load weight: 24,830 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space volume: 51 m³, Equipment: ABS, approx. 51,000 liters Heitling silo trailer for animal feed / 7 chambers / forced steering / aluminum rims ----* Manufacturer: Heitling * First registered: 01/2007 * Total weight: 32,000 kg * Empty weight according to vehicle registration document: 7,170 kg * Payload: 24,830 kg * Volume: 51m³ in 7 chambers (6.3m³/6.3m³/8.6m³/5.8m³/(5.8m³/8.6m³/9.6m³) * Axles: 2 x SAF / 2nd axle forced steering * Tires: 425/65 R 22.5 aluminum rims * Suspension: air suspension with lifting and lowering Lhodpfjq I H N Hox Agtsk * EBS * Pressure tank 2 bar * 7 chambers * 7 Sliding lid * 7 udders * 6 floor emptying flaps NW200 with external control on the right * Discharge line NW80 to the rear * Solimar loosening * Access with walkway at the rear left * Central lubrication * Control box at the rear * Hose box left and right * LED work lights * LED reversing lights * Rotating beacon at the rear * Tool box on the left * Cyclone * Full load supports * Single fender German vehicle!! German papers!!

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: F0i-F, total height: 3,120 mm, total width: 3,350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 2,597 mm, number of axes: 3, This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Additional equipment • Spindle Cooler: Included • Preparation for 4th Axis: Pneumatic Clamping Line • Torque Monitoring: Tool Monitoring Systems Lhjdpfx Asx D Sqtogtok Machine Benefits Technical Machine Benefits • Coolant pump medium pressure type 1: 19 bar, 1. 5 kw, 18 l/min • Cyclone filter: 25 um • Hinged belt conveyor: ejection left or right side • Oil separator: belt type Extra Information Machine still under power Technical Specification Taper Size BT 40

Condition: like new (used), functionality: fully functional, power: 242 kW (329.03 HP), gearing type: automatic, fuel type: diesel, color: yellow, operation weight: 24,200 kg, tire condition: 90 %, shovel volume: 4.2 m³, Year of construction: 2024, operating hours: 505 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, low noise, Hyundai HL970A Year of manufacture: 2024 Operating hours: approx. 505 Cyclone pre-air filter Cab air compressor Standard brake accumulator Safety boom lock Remote-controlled door 4 front LED cabin lights Voltage converter 24V LED beacon 360° surround view monitor (AAVM) Radar LED driving lights LED combination lights Second monitor Single brake pedal Piping for 3rd hydraulic circuit Bekamax central lubrication system Piping for quick coupler Joystick steering Lodeyr Scyepfx Agtohk Standard lifting frame With emergency steering Ride control 5-speed transmission (torque converter) Quick coupler ISO SW (Volvo mount) Triangle TB5 radial tires Transmission underguard Control valve block (MCV) with 3 sections Air-suspended, heated seat Hydraulic oil - VG46 Accelerator pedal with ECO switch Without Bmair filter system Standard paint finish Fingertip 3-slider, electric Rear window roller blind Wheel chock Axle cooling - front & rear Hydraulic differential Rear axle without differential lock Universal bucket 4.2 m³, bolt-on cutting edge Standard bucket 4.6 m³ with teeth available at extra cost

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lodpfx Aszdqrpogtshk Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Year of construction: 1993, condition: used, Manufacturer: Hosokawa Bepex Model: PCS-10 (Pulvocron) Year : 1993 Type: Air classification mill / Microniser Nominal capacity: 10 kg/h Brabender screw feeder Product filtration and collection cyclone + pneumatic cleaning Explosion-proof safety valve Rotary air/product seal valve Mikropul 12-6-30 receiver filter: Lhjdszbynvjpfx Agtok Product collection hopper with fine particle separation Internal dimensions: Ø 90 cm x 530 cm Lubrication unit with a pump Steam sterilisation Plan a new electrical installation (This request is subject to an additional quote) Full technical documentation + paper drawings Product outlet hopper capacity: 200 kg – 1,100 litres

Condition: used, mileage: 507,000 km, power: 350 kW (475.87 HP), first registration: 07/2016, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Arocs 3348/6x4 / Roll-off tipper GERGEN Chassis cover, front axle load 8.0 t, trailer brake 2-line, audio navigation system Bluetooth comfort, step with handrail on the roof, exhaust pipe downwards on the right, right-hand exterior mirror with maneuvering position, battery 220 Ah, batteries arranged one above the other, air horn, electrical pre-wiring in the cab 24V / 100 A, cab: steel-sprung, comfort, suspension: rear springs 2x15.0 t, suspension: front springs 8.0 t, 3 leaves, parking brake additionally on the front axle, vehicle without rear underrun protection, hazardous goods version ADR Type FL, transmission 12-speed - Type: G 330-12, info display 12.7 cm with video function, interior filter for construction site vehicles, cooler box / refrigerator, air intake behind the cab, air filter: cyclone air filter, engine brake reinforced, auxiliary drive MB 124-10c, configurable special module, retarder, rotating beacon left/right, reversing warning device acoustic (warning signal outside), disc brakes front axle, drum brakes rear axle, rear crossmember reinforced, protective plate under the main tank, seats in the cab: driver's seat, sprung comfort seat, sun visor outside, sun protection roller side window, driver's door, voltage converter 24V / 12V 10 A, stabilizer on 2nd rear axle, reinforced, steel rims 11.75x22.5 (on the front axle), steel rims 9.00x22.5, stowage flap outside left, 12V socket in the passenger footwell, 24V socket in the passenger footwell additionally, stone guard, CB radio preparation, preparation for reversing camera Lodjt T H D Tepfx Agtjhk Emission standard EURO 6, ABS switchable, axle configuration: 6x4, trailer socket 24V / 15-pin, Arocs, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab floor with engine tunnel 170 mm, suspension: leaf / leaf, power windows, windshield tinted, generator 100 A, urea tank (AdBlue): 60 liters, lifting roof manual (steel), rear axle bevel gear 300, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 290 liters aluminum, left, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 liters - 350 kW R6 Diesel (OM 471), engine compartment encapsulation, wheelbase 3300 mm, curb mirrors, waste heat recovery, rear window, disc brakes with full protection, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, stabilizer front axle, socket cab 24V, tachograph / EC control unit, preparation toll collection, front axle straight, water pump regulated, permissible total weight 33.00 t, oil cooler transmission. Unladen weight: 14795 KG.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Lodpfszgf A Uex Agtshk Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, mileage: 218,160 km, power: 330 kW (448.67 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 16,150 kg, maximum load weight: 9,850 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, Mtlg. House, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, rotating beacon, stowage box, leaf spring suspension, left-hand on-board suspension, air+light tow bar, aluminum tank, U-protection, roof hatch, crane at rear, emergency stop, grapple control, high seat, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 3900 mm Body: Meiller 2-sided tipper body with Bordmatik left approx. 11m³ & rear crane Hiab Jonsered 1300RS79 with high seat, loading height approx. 1540mm. 8t front axle, rear axle disc wheel 300 planetary 13.4t, electronic brake system with ABS and ASR, disc brake with full protection on front and rear axle, ABS can be switched off, parking brake additionally on front axle, condensation water monitoring for compressed air system, stabilizer bar on front axle, stabilizer bar reinforced 2nd rear axle, leather steering wheel. rear axle, leather steering wheel, smoker's package, residual heat utilization, construction site filter, additional thermal insulation, PSM, ClassicSpace, comfort locking system, off-road driving program, Mercedes PowerShift 3, pre-installation for toll collection, tank capacity: 290l, protective plate for tank, LED daytime running lights, High Performance Engine Brake, protective plate under bumper, cyclone pre-filter for coarse dust, transmission oil cooling, Powertrain Pack 1, Protection Pack, Grounder, MB 123-10c MPA N-/M-Speed power take-off. Load diagram: 4m-2940kg, 6m-2100kg, 7m-1800kg! VIN: WDB96421610141255! Gripper available at an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ljdpfjvhmkasx Agtshk - .