Used Schmidt & Partners Cutting Plasma Cutting Machine for sale (70,993)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Ibjdpszg D I Asfx An Ijc NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Ibedpjyi Ub Hofx An Ioc Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Isdsz Iw I Ajpfx An Iebc

Condition: refurbished (used), Year of construction: 2016, operating hours: 4,155 h, functionality: fully functional, repeat accuracy: 0.076 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, type of input current: three-phase, input voltage: 415 V, sheet thickness aluminum (max.): 300 mm, input current: 50 A, year of last overhaul: 2026, total length: 4,575 mm, total width: 2,285 mm, product height (max.): 300 mm, input frequency: 50 Hz, Water Jet cutter, Ward Jet Emerald E1530 1500mm x 3000mm cutting bed Hypertherm HP 30 High pressure pump Ijdpfx Anoz Ihdue Isbc Clemco Abrasive Hopper type 2452. 200 litres New grills and recent service XL Touch screen control system WR_XL , with aux screen Ward jet and Sigma nest Software Fully serviced and ready to work. 1000lts aux cooling water tank, circulation pump and heat exchanger Service toolkit and spare parts Cutting capacity - 300mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2815, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, total width: 3,500 mm, cutting current: 154 A, TECHNICAL DETAILS Working area: 9,000 mm Sheet thickness (max.): 100 mm MACHINE DETAILS Ibsdpfoy Tkkysx An Ijc Overall width: 3,500 mm Overall weight: 1,100 kg Type of input current: Three-phase Input voltage: 400 V Cutting current: 154 A Input frequency: 50 Hz Short-circuit current: 6 kA IP protection rating: 43/20 Power supply: 3L+N+PE AC 400/230 V, 50 Hz

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting Ibjdpfxjz Rl Tas An Ioc - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 300,012,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The JFY BFC+ is a new fiber laser cutting machine featuring a high-quality TRUMPF laser source. It enables fast, precise, and efficient cutting of various materials. The machine combines a robust design with high beam quality, stable processes, and reliable performance in daily production. It is particularly suitable for companies in the sheet metal processing, steel, and mechanical engineering industries, as well as for the production of housings, industrial components, and ventilation elements. Key advantages of the machine: * Laser source power: various * TRUMPF laser source * Fiber laser technology * High cutting speed * Stable cut edge quality * Precise cutting head with autofocus * Robust machine design * Intuitive operation * Fast production preparation * Cutting of various materials possible * High repeatability accuracy of parts * Excellent price-performance ratio * Technical support and service in Poland Application areas: * Cutting of mild steel * Cutting of stainless steel * Cutting of aluminum * Cutting of structural elements Ijdpfx Aoz Eq H Hen Iebc * Manufacturing of housings and machine elements * Production of ventilation elements * Series and single-item production * Job-order cutting !!!Individual configuration of the machine is possible according to customer requirements, including table size, loading and unloading system, and additional equipment!!! We are happy to provide you with detailed offers, technical specifications, and delivery terms at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Ibjdpfxozu Sqho An Ioc Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA Ijdex H T H Ropfx An Iebc - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Ijdpfow A H T Ajx An Ijbc Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, Flexor 380B Mono Film and paper cutting machine Material web width: 380 mm Isdpoz Ag Nbofx An Iobc Unwinding diameter: 800 mm Rewinding diameter: 1 x 500 mm Standard rewinding shaft diameter: 76 mm Machine will be factory-inspected, 3 months warranty.

Year of construction: 1995, condition: used, Foam cutting machine, as shown in the pictures. Stored in a warehouse – under a roof. Disassembled. Sold without any warranty or guarantee. If you have any questions, I can send more pictures and dimensions. Ijdpoz Iy Dgefx An Ijbc

Condition: ready for operation (used), Year of construction: 1999, We are offering this used Amada LASMAC LC-1212 A3 laser cutting machine, manufactured in 1999. Manufacturer: Amada Ijdez Rvg Dspfx An Ijbc Model: LASMAC LC-1212 A3 Year of manufacture: 1999 Condition: ready for use If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen elevator Width of the conveyor, effective 30 cmConveyor belt 160 cm flat, 100 cm upward conveyingDouble-sided cutting tablesRoller conveyor 200 x 40 cm Ibjdpfez Rbu Hex An Iec More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Condition: used, inspected, fully functional Iedpfxsz Ilm Tj An Iebc Additional information: Large storage area for sheets Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2013, The Kronen GS 10-2 TTS is an advanced belt cutting machine that sets itself apart from the standard GS 10-2 through its integrated sensor and PLC technology. This innovation allows the machine to cut products with high precision, minimizing waste and maximizing yield. What makes the GS 10-2 TTS unique is its automatic product detection: sensors and PLC control detect the beginning and end of each item. This enables the machine to calculate exactly how many cuts are needed for the desired thickness, reducing waste and increasing output. The Top-Tail function allows the GS 10-2 TTS to automatically remove the ends of products such as carrots or cucumbers, ensuring only the usable part is processed. The knife is servo-driven and starts cutting only when the product reaches the end of the infeed belt, delivering precise and consistent results. The extended infeed belt can be equipped with a trimming station, enabling multiple operators to work simultaneously and boost productivity. If the TTS function is not needed, the machine can operate as a standard GS 10-2, suitable for cutting, grating, shredding, or dicing various foods such as lettuce, herbs, meat, fish, bread, cheese, and nuts. Ibedpfxsz Rc Sto An Iec Kronen GS10 can cut cubes — but not “standard” without the correct cutting set. Cubes (dicing) are made using a special cube/grid cutting disc (e.g. 10×10 mm, 20×20 mm). Technical specifications Capacity: Up to 600 kg per hour depending on the product and cutting methodCutting options: Slices, cubes, or segments with a cutting thickness from 1 to 130 mmSpeed: Conveyor speed 2.2 to 16.4 m/min; knife speed 105 to 795 rpmDimensions: Length 1610 mm, width 670 mm, height 1275 mm; weight 235 kgPower: Total power 1.8 kW; supply 230 V, 50 Hz Applications Vegetables: Carrots, cucumbers, leeks, peppers, eggplantsFruits: Pineapples, melons, strawberriesMeat and fish: Chicken breast, sausages like cabanossi or bockwurstVegan products: Meat substitutesOthers: Bread, cheese, nuts Condition This machine is in excellent used condition, fully checked and ready for production use.Comes complete with stainless steel cutting table 150 x 106 cm with 5 cutting boardsIncludes 6 knives with storage rack More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2007, Cutting blade ( single)Shaking flat brush380 VoltStainless steel frameAdjustable speed More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery Ibjdpfxez Rduio An Iec

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production Ibodpfey D E R Nox An Ijc • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Isdpfxeww Upzj An Isbc Chuck maximum 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Isdpfxozw Tzaj An Iobc Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Isdpfx Asxywupjn Ijbc Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: good (used), Year of construction: 2018, With Cyklop binder Adjustable speedWith cutting bladeThe cutting length is easily adjustableWith Flex stainless steel discharge belt 245 x 38 cm Ibsdpjz Rctdefx An Isc More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 Isdpfx Aou R A Dlon Isbc machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V Iodpfx Aew En E Ejn Iobc weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ Ibjdpfxey D Sa Ds An Isc ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.