Used Schmidt Compact 400 for sale (25,741)

Condition: new, MoS² High-Performance 400 black, 400 ml cartridge, OKS · For heavily loaded or impact-stressed rolling and plain bearings, spindles, and joints · Forms an MoS² lubricating film for emergency running properties · Reduces wear · Resistant to aging and oxidation · Universally applicable high-pressure grease · NLGI class 2 · Further technical properties, designation: KPF2K-30 Prjdpfxo Abw Amj Ai Tec · Color: black · Packaging: cartridge Packaging: Cartridge Content: 400 ml

Condition: new, High-strength adhesive gel, suitable for temperatures from -40°C to +70°C, 125g tube, PATTEX · Particularly suitable for bonding on vertical surfaces, does not drip, and does not leave stringy residue. · Suitable for combination bonding of wood-based materials with decorative laminate panels, rubber, leather, cork, felt, rigid PVC, soft foam materials, metal, etc. · Not suitable for polystyrene, soft PVC, and synthetic leather. · Temperature resistant up to +70°C. · Color: yellowish. · Other technical properties, type: PCG2C. · Chemical basis: chloroprene rubber. Content: 125 g Prodpfx Aij Abxkls Tec Packaging: Tube Type: PCG2C

Condition: new, Maintenance oil 641, 400 ml spray can, OKS · Displaces moisture · Excellent cleaning effect · Temporary protection against corrosion · Temperature range: -30 °C to +60 °C · For disassembly, lubrication, and maintenance of machine components and metal surfaces · For industrial and workshop use Content: 400 ml Packaging: Spray can Prjdpfxj Abw Shs Ai Tjc Temperature: -50 to +80 °C

Condition: new, Chain protector 341, 400 ml, greenish spray can, OKS · Extremely good creep properties · Strong adhesion and resistant to being flung off · Very good wear protection · O-ring neutral · Solvent-free · For high-speed chains · Synthetic lubricant for machine components exposed to high pressures or corrosive environments · Other technical properties: Container: spray can Predpe Abw I Nofx Ai Tsc Container: spray can Content: 400 ml

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Belt length: 5 m - Belt width: 40 cm - Chassis with pneumatic tires, Ø360 mm - Adjustable height via hand winch - Minimum conveying height with 5 m belt length: 2 m - Maximum conveying height with 5 m belt length: 3.30 m Prodpfs Ab H Dyox Ai Tec SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without extra charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min Dimensions (L x W x H): 2800 x 700 x 650 mm Drive: Electric motor 400V / 0.75 kW Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Belt: Double-telescoping Belt dimensions: 5000 x 400 mm

Condition: new, - for fine planing cuts on various types of wood Bore: 30 mm Diameter: 400 mm Pedpe Ab Nkvsfx Ai Tjrc Cut: 3.5/2.5 mm Teeth: 60

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Prjdpfozyx E Aex Ai Tec Weight: approx. 1800 kg

Condition: new, Toolbox Compact 62, dimensions 620x320x315 mm, 10 compartments, PP, RAACO · Features fully retractable handles integrated into the lid · Tool trays and drawers can be further subdivided as required · Available with separate divider sets – not included in the scope of delivery · Please order separately · Made of impact-resistant polypropylene Number of compartments: 10 Load capacity: 50 kg Width: 320 mm Drawers: 4 Material: Polypropylene Height: 315 mm Prjdpfj Ab Hanjx Ai Tsc Design: Removable tool tray, 10 loose small parts inserts and dividers, 4 integrated drawers guided on telescopic rails Length: 620 mm Type: 62

Condition: new, Efficiently saw and split firewood – the LUMAG SSA-400-12/E combines both work steps in a single machine. The hydraulic log saw and splitter processes logs with a diameter of up to 38 cm and achieves a splitting force of 10 tons. The powerful 7.5 kW electric motor with 400 V provides a reliable and consistent drive for firewood processing. The logs are fed to the chainsaw via three conveyor rollers. After the sawing process, the hydraulic splitting unit takes over the further processing. The splitting wedge setting is done hydraulically and can be adjusted to the type of wood being processed. The height-adjustable conveyor belt transports the finished wood pieces directly out of the work area and supports a continuous workflow. Highlights at a glance: * 10 tons splitting force * Processing of logs up to 38 cm in diameter * Max. splitting length 55 cm * Powerful 7.5 kW electric motor * 400 V three-phase connection * Sawing and splitting in one operation * Hydraulic splitting wedge setting * Manual feed system with three conveyor rollers * Height-adjustable conveyor belt * Ideal for stationary use in firewood processing The LUMAG SSA-400-12/E is ideal for efficient firewood processing and combines sawing, splitting and removal in a continuous workflow. Drive: Electric motor, 3-phase Splitting force: 10 t Prjdpfx Ais Adkdvj Toc Bar length: 45 cm Working speed: 11 cm/s Conveyor belt (L × W × H): 320 × 20 × 220 cm Conveyor speed: 0.8 m/s Log diameter: 10–38 cm Return speed: 18 cm/s Motor power: 7.5 kW Max. splitting length: 55 cm Splitting cycle: approx. 8 seconds Voltage: 400 V

Condition: used, fuel type: diesel, Year of manufacture: 2016 Lifting capacity: 450 kg Please contact Gebrauchtgeräte Center for more information Prodpfxsztuuao Ai Toc

Condition: new, High-performance firewood processing with comfortable hydraulic technology – the LUMAG SSA-400-12PRO/G combines sawing, splitting, and removal in an efficient workflow and offers a significantly more extensive hydraulic system compared to the standard series. The hydraulic log splitter processes logs with a diameter of up to 38 cm and achieves a splitting force of 12 tons. A powerful 10.0 kW gasoline engine with electric start provides the drive. This allows the machine to be used flexibly and independently of a power connection. The wide hydraulic feed chain with reinforced carriers transports the logs in a controlled manner to the hydraulically driven chainsaw. Log holders and splitting wedge adjustment are also hydraulically operated, supporting a comfortable and consistent workflow. With a maximum splitting length of 57 cm, the SSA-400-12PRO/G is suitable for the efficient processing of various log sizes. Mechanical flaps reduce the risk of the sawn material jamming in the splitting area. The height-adjustable and pivoting discharge belt transports the finished wood pieces directly out of the work area. Reinforced carriers ensure reliable material transport. An LED interior light and the easily accessible cleaning opening further facilitate work and maintenance. Highlights at a glance 12 tons splitting force Processing of logs up to 38 cm in diameter Max. splitting length 57 cm 10.0 kW gasoline engine with electric start Sawing and splitting in one operation Hydraulic feed chain with reinforced carriers Hydraulically driven chainsaw Hydraulic log holder operation Hydraulic splitting wedge adjustment Height-adjustable and pivoting discharge belt LED interior light Cleaning opening in the splitting area Flexible use independent of the power grid The LUMAG SSA-400-12PRO/G is particularly suitable for users who want to process larger quantities of firewood in a powerful and comfortable manner and who value an extensive hydraulic system. Splitting force: 12 t Engine power: 10.0 kW Max. splitting length: 57 cm Return speed: 18 cm/s Displacement: 459 cm³ Splitting cycle: approx. 8 seconds Conveyor speed: 0.8 m/s Working speed: 11 cm/s Drive: Gasoline engine with electric start Podo Adkfgjpfx Ai Tjrc Log diameter: 10–38 cm Discharge belt (L × W × H): 320 × 25 × 220 cm Bar length: 45 cm

Condition: new, Efficiently saw and split firewood – the LUMAG SSA-400-12/Z combines sawing, splitting, and removal in a continuous workflow. Thanks to the PTO drive, this model is particularly suitable for mobile use with a suitable tractor. The hydraulic log splitter processes logs with a diameter of 10 to 38 cm and achieves a splitting force of 10 tons. To operate, a tractor power of approximately 20 hp is required, with a maximum PTO speed of 540 rpm. The logs are guided to the hydraulically driven chainsaw in a controlled manner via the manual feed system with three conveyor rollers. The manual chainsaw and log holder operation, as well as the hydraulic splitting wedge adjustment, enable reliable and user-friendly operation during firewood processing. With a maximum splitting length of 55 cm and a 45 cm long saw blade, the SSA-400-12/Z is designed for different log sizes. The height-adjustable conveyor belt transports the finished wood pieces directly from the work area and supports a continuous material flow. Highlights at a glance: Pedpfx Aj Adkftsi Torc 10 tons splitting force Processing of logs up to 38 cm in diameter Max. splitting length 55 cm PTO drive for use with a tractor Required tractor power approx. 20 hp Sawing and splitting in one operation Hydraulically driven chainsaw Hydraulic splitting wedge adjustment Manual feed system with three conveyor rollers Height-adjustable conveyor belt Flexible use independent of a power connection The LUMAG SSA-400-12/Z is a powerful solution for efficient firewood processing and is particularly suitable for users who want to operate the log splitter flexibly via the PTO of a tractor. Splitting force: 10 t Splitting cycle: approx. 8 seconds Max. splitting length: 55 cm Drive: PTO drive Conveyor speed: 0.8 m/s Required tractor power: approx. 20 hp Working speed: 11 cm/s Log diameter: 10–38 cm Return speed: 18 cm/s PTO speed: max. 540 rpm Conveyor belt (L × W × H): 320 × 20 × 220 cm Blade length: 45 cm

Condition: new, Diesel engine YANMAR 4TNV88 - Three-phase synchronous alternator - Three-phase power 18 kVA (14.4 kW) - Single-phase power 7 kVA – Water-cooled The MOSA GE 20 YSXC model is a super-silenced generator set with a fuel tank capacity of 60 liters for 17.5 hours of continuous operation. The machine is equipped with a roll bar, lifting hook, forklift entry and fuel tank, and thanks to the enclosure, the noise level is minimal. Weighing only 610 kg, the generator set is compact and easy to transport thanks to the manual trolley or the approved road chassis. The built-in control panel can be secured with a padlock and contains the connections and controls of the machine, including a residual current circuit breaker, main disconnect switch and motor protection. When the Compound output voltage regulation system is combined with the AVR, the latter is replaced by the Compound if a current above the rated value is required for a short period of time (e.g., engine start). The dual regulation system is capable of operating with either the Compound or the AVR alone, thus offering a higher level of reliability in the event of a failure of one of the two systems. The generator set is designed to be connected to the EAS automatic start-up control panel to use the unit as an emergency generator in the event of a failure of the main power supply of the available power grid. A remote control TCM allows the engine to be started/stopped from a distance of up to 10 meters from the machine. Suitable for a wide range of applications such as industrial facilities, residential sites, hospitals, events, large construction sites, noise-sensitive environments, and as an emergency power generator. Complies with CE guidelines. INFO Combined voltage regulation: Electronic AVR + Compound Sockets: 1x400V 32A 3P+N+T CEE - 1x400V 16A 3P+N+T CEE - 1x230V 16A 2P+T CEE - 1x230V 16A 2P+T SCHUKO Emergency stop button Prepared for EAS emergency power automatic system GENERAL Protection class IP: 23 Psdpfx Aio Adf Ehs Terc Dimensions: 1720x980x1110 mm Weight (dry): 610 kg Measured sound power level Lwa (sound pressure LpA): 93 dB(A) (68 dB(A) @ 7m) Guaranteed sound power level Lwa (sound pressure LpA): 94 dB(A) (69 dB(A) @ 7m) Cos ?: 0.8 Engine: Diesel 4-stroke, naturally aspirated, direct injection, water-cooled Fuel consumption (75% of PRP): 3.4 l/h * Three-phase standby power: 20 kVA (16 kW) / 400V / 28.9 A */: * The specified values also include all protruding parts. / Operation in enclosed spaces, taking into account Directive 2000/14/EC * Maximum power grid standby: 18 kW (24.5 HP) *: * Maximum power (not overloadable) according to ISO 3046-1 GENERAL DATA: Insulation class: H * Dimensions LxWxH (mm): 1720x980x1110 mm Fuel tank capacity: 60 l Guaranteed sound power level LWA (sound pressure LpA): 94 dB(A) (69 dB(A) @ 7m) * Single-phase PRP power: 7 kVA / 230V / 30.4A * Three-phase PRP power: 18 kVA (14.4 kW) / 400V / 26 A *: * Specified power according to ISO 8528-1 Protection class: IP 23 Measured sound power level LWA (sound pressure LpA): 93 dB(A) (68 dB(A) @ 7m) A.C. GENERATOR - 50 Hz: Three-phase synchronous alternator, self-excited

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Podpfs Adfctox Ai Tsrc Feed motor 4 kW Feed speed 6-24 m/min. LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder ----- Sold on behalf of a client! Working width (min. – max.): 15 – 230 mm Working height (min. – max.): 10 – 150 mm Width and height are motorized/controlled 6 spindles, spindle diameter 40 mm, 6,000 rpm Spindle configuration ----- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: top Spindle 5: top Spindle 6: bottom Technical specifications provided by the manufacturer – no guarantee!

Condition: used, Year of construction: 2021, total length: 7,800 mm, - Max. Arbeitshöhe Straße: 14,10 m - Max. Arbeitshöhe Maschine stehend Schiene: 14,40 m - Max. Arbeitshöhe bei Fahrt Schiene: 12,90 m - Max. Plattformhöhe Straße: 12,10 m - Max. Plattformhöhe Maschine stehend Schiene 12,40 m - Max. Plattformhöhe bei Fahrt Schiene 10,90 m - Max. seitliche Reichweite Straße 9,30 m - Max. seitliche Reichweite Maschine stehend 9,30 m Predpfx Aj Adl Ipji Tjc - Max. seitliche Reichweite bei Fahrt Schiene - Max. Traglast Arbeitskorb 400 kg - Drehbereich 180 Grad - Steuerung: proportional - Max. Fahrgeschwindigkeit Straße: 4 km/h - Max. Fahrgeschwindigkeit Schiene 18 km/h - Korbdrehung: 90 Grad

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Prsdpfxsxzfwue Ai Toc Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: new, GFK container, 400 liters, internal dimensions L1110 x W710 x H590 mm, grey · The excellent properties of glass fiber reinforced plastic form the basis for the high-quality GFK containers. · They have exceptional inherent stability. Internal length: 1110 mm Predpfx Ae Acp H Tji Toc Internal width: 710 mm Internal height: 590 mm Color: grey Capacity: 400 l Weight: 17 kg

Condition: new, Hose 2 SN-DN08 with 2 steel wire braids; with rubber kink protection; 1x hand-tightened fitting M22x1.5; 1x quick-connect nipple Ø 11 mm; max. 400 bar; max. 150 °C; length 10 m Packaging unit: piece Prsde Abg Tnepfx Ai Tsc Packaging quantity: 1

Condition: new, Hose 2 SN-DN08 with 2 steel wire reinforcements; with rubber kink protection; 1x hand-tightened fitting M22x1.5; 1x quick-connect nipple Ø 11 mm; max. 400 bar; max. 150 °C; length 20 m Packaging unit: piece Prjdj Abg Tzopfx Ai Tjc Packaging quantity: 1

Condition: new, Compact scale, weighing range 3 kg, digit increment 0.1 g, not certified for legal metrology. KERN Psdpfx Ae Adcb Tsi Terc * Not certified for legal metrology, with a calibration program for adjusting accuracy (external calibration weight required) * Piece counting with reference piece counting * Separate memory for the weight of Weighing platform width: 252 mm Depth: 345 mm Digit increment: 0.1 g Weighing range: 3 kg Weighing platform depth: 228 mm Height: 106 mm Minimum piece weight: 0.2 g Width: 270 mm Design: not certified for legal metrology

Condition: new, Compact scale, weighing range 6 kg, digit increment 0.5 g, not suitable for legal metrology. KERN * Not suitable for legal metrology, with an adjustment program for setting the accuracy (external adjustment weight required) * Piece counting with reference piece counts * Separate memory for the weight of Width: 270 mm Depth: 345 mm Weighing range: 6 kg Digit increment: 0.5 g Prsdpfxo Adccds Ai Tec Weighing platform depth: 228 mm Design: not suitable for legal metrology Minimum piece weight: 1 g Height: 106 mm Weighing platform width: 252 mm

Condition: new, Robust professional mixer with a 400 V three-phase motor – the ATIKA Expert 185 is designed for demanding and regular mixing tasks on construction sites. The 750 W three-phase motor reliably drives the large-volume 185-liter mixing drum. With a nominal filling volume of approximately 135 liters, the Expert 185 offers sufficient capacity for larger mixing quantities. The large handwheel with disc brake and foot control allows for safe and comfortable tilting of the drum. The reinforced, torsion-resistant frame, the stable drum bearing, and solid rubber tires ensure high stability and durability. Prjdps Abtg Iefx Ai Tjc Highlights at a glance: 185 l drum capacity Approx. 135 l nominal filling volume 750 W three-phase motor 400 V mains connection Handwheel with disc brake and foot control Specially designed mixing paddle for optimal mixing quality Reinforced, torsion-resistant frame Solid rubber tires Ø 400 mm Thermal motor protection Restart protection in case of power failure Note: The mixers are stored in an open-air storage area until shipment. Slight contamination or weather residues do not constitute a defect or grounds for complaint. Drum filling capacity approx.: 185 liters Restart protection: yes Protected against electrical shock: yes Protection class: IP45 Power P1: 750 watts Solid rubber tires Ø: 185 liters Dimensions (L x W x H): 1360 x 912 x 1355 mm GS safety mark: yes Three-phase motor: 400 V3~ 50 Hz

Condition: new, Scissor-roller conveyors, 400 mm, number of axles: 64 * Design: with ball-bearing mounted, bright zinc-plated steel rollers * Optionally available with 2-row ball-bearing mounted, blue plastic rollers * Roller diameter: 48 mm * Axle diameter: 8 mm * All steel parts are zinc-plated * Each support leg has 2 lockable swivel casters with solid rubber tires * Conveyor width: 300 mm, 400 mm, 500 mm, or 600 mm, whereby the conveyed material can also be wider and protrude laterally * Roller spacing: continuously adjustable from approximately 32 mm to approximately 130 mm, depending on the extended length * Height adjustment range: standard from approximately 700 mm to 1100 mm * Delivery of intermediate lengths, special widths, and special heights is possible. Conveyor width: 400 mm Number of support legs: 5 Prjdpfxo Abu Rue Ai Tjc Load capacity between 2 supports: 100 kg Number of axles: 64 Axle diameter: 8 mm Number of rollers per axle: 4 Extendable up to a maximum of: 2.2-7.9 m

Condition: new, Roller conveyor, 400 mm, number of axles: 36 * Design: with ball-bearing supported rollers made of blue plastic tubing, Ø 50 x 2.8 mm * Optionally with ball-bearing supported rollers made of galvanized steel tubing, Ø 50 x 1.5 mm * With spacer tube, Ø 10 mm Psdj Abu H Aspfx Ai Tsrc * Axle diameter: 8 mm * All steel parts are galvanized * Each support foot has 2 lockable swivel casters with solid rubber tires * Conveyor width: 300 mm, 400 mm, 500 mm or 600 mm, whereby the conveyed material can also be wider and protrude laterally * Roller spacing: steplessly adjustable from approx. 55 mm to approx. 130 mm, depending on the extended length * Height adjustment range: as standard from approx. 700 mm to 1100 mm. * Delivery of intermediate lengths, special widths and special heights is possible Axle diameter: 8 mm Extendable up to max.: 1.9-4.4 m Number of axles: 36 Number of rollers per axle: 2 Conveyor width: 400 mm Number of support feet: 3 Load capacity between 2 supports: 100 kg

Condition: new, Tungsten carbide-tipped circular saw blades Type SWZ • Nail-resistant – Low noise Special alternating tooth design for rough cross-cutting Application: Construction timber and boards, round and square timbers with concrete reinforcement and nail remnants, Pjds Abn Dbjpfx Ai Terc Aerated concrete blocks, plastics, acrylic glass, facade profiles and asbestos cement Made in Germany