Used Shinohara Offset Printing Type for sale (42,646)

Condition: ready for operation (used), Year of construction: 1996, KBA 104-5P, Auto wash, auto plate, IR dryer, 1996 year Format: max - 72x104 cm min - 28x42 cm max speed 15000 per hour weight approx 49 tons dimensions 11x4.3x2.3 m Bodoyi T Ncepfx Afwedg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Bsdpfxohg Rcxe Afwjdg Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, We offer an very special development line of water transfer printing with complete know how of CUBIC - JAPAN EQUIPMENT CAN BE USED FOR ALL KIND MATERIALS, PLASTIC, WOOD, METAL AND OTHER.... Specifications Manufacturer COLOR DEC Model ITALY-CUBIC LAB 2000 Year 1996 Condition Used Bsdpfx Ajvk Ev Hjfwedg COMPLETE CUBIC PLANT- 3D WATER TRANSFER PRINTING EQUIPMENT LOOK ATTACHED PHOTOS Include complete production equipment for 3D watertransfer print. -washing machine -transport system for clean room -clean room humidity device -storage for the CUBIC FILMS - heating-drying cabine for lack drying -bath with halfautomatic floating system- possiblle to make more parts at once, depende from the size of printing parts Equipment is in perfect working condition, ready to use. FOR ADDITIONAL PHOTOS WE CAN SEND BY EMAIL. ALL DOCUMENTATION WILL BE PRESENT TO BUYER.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Description WE OFFER AN FULLY FUNCTIONAL IN GREAT WORKING CONDITION AND WILL BE AN GREAT OPORTUNETEY INCLUDING FULLY TOOLINGS AND ACCESSORIESS , READY FOR WORK. MACHINE STILL WORKING IN DAILY ORDERS TYPE: HARTFORD HSA 2215 AD + HEIDENHAIN TNC530 IDEAL MACHINE FOR MAKING BIGGER PLATES MACHINE HAS COOLING TROUGH SPINDLE FULLY EQUIPPED WITH TOOLINGS AND ACCESSORIESS travel: X: 2200 mm Y: 1500 mm Z: 780 mm SPACE BETWEEN TABLE AND SPINDEL: 220-1000mm SPINDLE SPEED:10.000RPM SPINDLE POWER : 30KW - DIRECT DRIVE Tool magazine: 30 Positioning accuracy: 0.01mm Main motor power: 18.5kw TOTAL WEIGHT : 28 TON STANDARD EQUIPMENT: - + TNC SOFTWARE - + HEIDENHAIN three-point measuring bars - + PRE-TENSIONED SPINDLES - + HEIDENHAIN handwheel HR410 - + OIL COOLING OF THE SPINDLE - + CTS cooling through the spindle 20 BAR - + HEIDENHAIN 3D touch probe for workpiece measurement TS640 - + LASER NC-4 F230ZA TOOL MEASUREMENT - + HEIDENHAIN SOFTWARE OPTION 1+ 2 (computer HSCI, CC6222) Bdodjydr Imopfx Afweg - + HEIDENHAI PL-510 - + SPINDLE AIR CURTAIN - + OIL SKIMMER - + EXTRA LIGHT - + MACHINE ENCLOSED ON ALL SIDES - + SPINDLE TEMPERATURE COMPENSATION ADDITIONAL EQUIPMENT: WITH MACHINE COMES FULLY ATC TOOLS COMPLETED LOADED TOOLINGS AND ADDITIONAL FULL TOOLS FROM THE TABLE ALL OTHERS TOOLS AND ACCESSORIESS WHICH BELONG TO MACHINE WE ORGANIZE FOR CUSTOMER ALSO DISMANTLING LOADING AND SHIPPING

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER 4. 2 SET OF RACK DRYIERS Bdedpfx Afsxwnw Aewjg ALL ARE NEW , OUT OF THEIR BOXES.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts Bedpfx Aow H Naajfwodg

Condition: excellent (used), Year of construction: 2018, operating hours: 8,011 h, functionality: fully functional, total length: 16,000 mm, total width: 3,000 mm, total height: 3,600 mm, overall weight: 40,600 kg, power: 360 kW (489.46 HP), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Shredder/Crusher/Industrial Shredder • Manufacturer: Doppstadt • Type: DW3060K Büffel • Year of Manufacture: 2018 • Operating Hours: 8011 hrs • Power: 360 kW/489 hp • Industrial Shredder • Engine: Mercedes Benz MTU OM471LA(6R 1300) EUROMOT IV, 6-cylinder diesel • Pneumatic spiral fan • Fuel tank: 2 x 300 liters • AdBlue • Telematics system • Crushing roller, size M • Length: 3 meters • Diameter: 80 cm • Tooth width: 7.4 cm • Tooth height: 8.5 cm • Number of teeth: 125 pieces • Throughput: 20-60 t/h, depending on the material • Magnetic belt • Track system: Strickland 335713-DK40-AA • 2 travel speeds • Loading height: 3.10 meters • Remote control • Central lubrication system • Transport length: 16 meters • Transport width: 3 meters • Transport height: 3.60 meters • Total weight: 40,600 kg • German machine • Ready for immediate use _____ Selector HS-514/Star screen with return conveyor • Screen size: 8-10 cm • 13 star shafts • Integrated support legs Bdsdpszimm Hsfx Afwsg • The attachment is picked up by the machine and driven via the auxiliary hydraulics • Star shafts are reversible • Reversing mechanism: Hydraulic • Return system for larger materials • Discharge height: 3.10 meters • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Printing International Cristal 90X2 Bjdpfx Afov Iyh Sjwodg

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Bsdpjya Hvqjfx Afwjdg Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change Bodpfxeywv Ewj Afwodg - Cooling system - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Bdjdpfx Aoxwpvgofwog Furthermore, a variety of materials is available for the machine.

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Bodetyqhqjpfx Afwodg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Bsdpfxovmwn Hs Afwsdg Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Bedpfx Afjunia Hewsdg

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Bjdpovy Aipefx Afwedg Machine dimensions 10130×2130×2960 mm

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. Bdsdpfx Aowqcrqefwjg - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Bdodpfxewhvq Is Afwjg Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Bdsdpfjzx E N Sjx Afwjg Safety approval: TÜV Rheinland – Type Approved Safety

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Bsdpfxjzx E Axo Afwsdg Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Bdodjzvb I Ejpfx Afwog Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: excellent (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, overall weight: 18,000 kg, type of input current: three-phase, input current: 380 A, total width: 3,000 mm, total length: 7,000 mm, total height: 3,500 mm, input frequency: 50 Hz, Stack-type flexographic printer. Bdsdpfx Aezv D Dcsfwsg

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Bedpjv Nw Npefx Afwodg Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) Bdodpfx Afjxh Rqtowjg TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 Bdsdpfx Afjwwarujweg tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 510 rpm, table length: 457 mm, table width: 457 mm, overall weight: 1,200 kg, Kearns ‘S’ Type Horizontal Borer Table Size 457 x 457mm Long Travel: 610mm Cross Travel: 305mm Vertical Travel: 286mm Bdsdjzv T Dljpfx Afwsg Facing Head Diameter: 250mm Spindle Speeds (6 off): 45 - 510 RPM