Used Sinmag Robo 7L for sale (1,888)

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 550 mm, table length: 380 mm, Equipment: documentation/manual, FANUC ALPHA T14iFb VERTICAL MACHINING CENTER, MANUFACTURED IN 2015 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL TRAVEL: X 500, Y 400, Z 330 MM TABLE SURFACE: 550 x 380 MM DIRECT DRIVE SPINDLE, 24,000 RPM Lsdpoy Tvnwsfx Aa Rorr SPINDLE COOLANT SYSTEM

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Lrsdpfx Aajzim A Io Rer Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Lredpozf Afqofx Aa Rer Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Lredpfeza U Nljx Aa Rer Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, mileage: 498,850 km, power: 316 kW (429.64 HP), first registration: 07/2021, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Autoradio - Climate control - Coffee-machine - Double glazing - EBS - Electrically operated mirrors Lsdpjy Ivfxofx Aa Rerr - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Light alloy wheels - Portable radio set - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Engine capacity: 12.419 cc Dimensions (LxBxH): 1210 x 387 x 255 cm Make of engine: MAN

Condition: excellent (used), KUKA KUKA KR 180 R2500 extra Industrial Robot + KRC4 Controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and teach pendant. The system was used in an industrial environment and is fully operational. It is ideally suited for automation, material handling, welding applications, and general production processes. Robot Technical Specifications: - Payload: 180 kg - Reach: approx. 2496 mm - Axes: 6 - Weight: approx. 1059 kg KRC4 Controller Technical Specifications: - Supply voltage: 3 x 400 V - Frequency: 50/60 Hz - Full load current: approx. 20 A - Circuit protection: 25 A - Weight: approx. 151 kg Dimensions (approx.): - Robot height: approx. 2200 – 2500 mm - Footprint: approx. 1000 x 1000 mm - Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: - KRC Version: V8.2.22 - HMI Version: 8.2.0.4 B142 - Base System: KS V8.2.142 - Windows Version: XPe V3.0.2 - Additional Axes: 1 Features: Lodsy Dn Siopfx Aa Rsrr - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables and wiring - Industrial design for continuous operation Condition: - Used, technically fully functional - With normal signs of use - The system was in operation until recently Scope of delivery: - KUKA KR 180 R2500 extra robot - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables / wiring as depicted in the photos - Scope of delivery: (See images) (Subject to change and errors in technical data; all information provided without liability!) We are happy to answer any further questions by phone.

Condition: used, mileage: 1,900 km, power: 353 kW (479.95 HP), first registration: 05/2026, fuel type: diesel, number of seats: 51, gearing type: automatic, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, onboard kitchen, parking heater, soot filter, 2 in stock - Identical models MAN Lion’s Coach - R07 - 12.10 meters New vehicle, not yet registered - Manufacturer’s warranty 24 months / 12 months Upon request, FULL WARRANTY from MAN - 48 months or 320,000 km from initial registration. We would be happy to send you the detailed specifications by email. Highlights: * MAN engine, 12,419 cc, 353 kW * MAN TipTronic, 12 gears * 49 reclining seats * Driver’s seat + co-driver’s seat * LED headlights * Navigation system * USB ports at all seats * Toilet * Kitchen * All assistance systems * Alloy wheels * etc. Vehicles are available immediately in 85235 Odelzhausen. Driver’s sleeping area * Kitchen * Cooler box * Navigation system * Reclining seats * Auxiliary heater * TV * Toilet Speed regulation: Adaptive cruise control Air conditioning: Automatic climate control * Stationary air conditioning system Safety: ABS * Retarder/Intarder ---- Lrodpfey T Aygox Aa Rsr Inspection and test drives are possible at any time! If you have any questions, please do not hesitate to contact us. Visit our website as well. Errors and prior sale are subject to change. ---- Opening hours: Monday - Friday, 9:00 a.m. - 3:00 p.m. Also available by appointment. ---- Information on data protection can be found at:

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm Lredpfszlhmmox Aa Rjr AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Year of construction: 2002, condition: not inspected (used), Robot + control cabinet + no operator panel + connecting cables Lredpfx Aogu U Nqja Ror Used robot, not tested, with controller and cables. No technical documentation available. Not tested.

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Ledpfxozm Swfe Aa Rerr Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg

Condition: good (used), Year of construction: 2022, Ref. no.: 18635 Manufacturer: SEPRO Type: 5 T25 Year of construction: 2022 Further information: The SEPRO S5-25 med is a powerful 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and cosmetic condition and comes from a clean production environment. The “med” version is specifically designed for medical manufacturing and cleanroom applications. The robot was used exclusively for testing and training purposes and therefore has very low operating hours. The robot is additionally fitted with a Zimmer Group pneumatic rotation module and a Gimatic QCY90-A Quick Tool Changer system. Lrodjy Ub Edspfx Aa Rsr The Zimmer module allows components to be rotated between defined positions, while the Gimatic system enables quick changing of grippers or vacuum tooling. These additional features increase the flexibility of the robot for a wide range of automation applications.

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00655, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.10 Ledpfx Aajzqt Nke Rerr RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8, F705R.2.7 L436 V20 TECHNO MAN Equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 hp) * TN cab * Main wheelbase 2,980 mm * 2 batteries, 12 V, 175 Ah * 390 l diesel fuel tank, left side * 35 l AdBlue tank, right side * Air compressor, 1-cylinder, 360 cc * Pneumatically controlled air processing system * Advanced Emergency Braking System (full brake assist) * MAN EVBec high-performance engine brake, multi-stage * Drum brakes * MAN D2676 LF78 diesel engine, 375 kW (510 hp) power, 2,600 Nm torque, Euro 6d * Fuel pre-filter with oil/water separator * Automatic transmission * Front axle tires: 385/65R22.5 * Rear axle tires: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanical roof hatch * Central locking system with remote control * LED daytime running lights * 2 rotating beacons on cab roof, 1 right and 1 left * 2 work lights on cab roof, 1 right and 1 left * Exterior mirrors, electrically adjustable with maneuvering aid, heated * Preparation for 2 cameras, one linked to reverse gear * Driver's seat heating * Driver comfort seat, air-suspended * Multifunction steering wheel, adjustable for height and tilt * 2 power sockets in center of cab, 12 V and 24 V * Air conditioning, Climatronic * Additional water heater, 4 kW * Interior folding sun visor for windshield * Sun roller blinds for door windows * MAN Media System Navigation Advanced 7 inch * MAN Advanced sound system with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Cab finished in pure white, RAL 9010 Crane Equipment: * FASSI loader crane F705R.2.7 L436 V20 TECHNO * Infinite slewing range * Dual linkage system with PROLINK (overbending articulated arm up to 10°) * Electronic overload shutdown with FX900 * FASSI Stability Control FSC-SII incl. LMB II * Emergency stop and visual alarm (at 90% and 100%) * XF System (Extra Fast) + XP System (Extra Power) + FL – System (Full Lift) * Radio remote control with linear levers and display of pressure values (in bar and %) * Emergency manual control for crane operation * Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base * Hydraulic outriggers, extendable on both sides, support width 8.29 m * Outriggers operable via radio remote control * Standard color RAL 3020 traffic red – all cylinders painted black Ledpfjywfw Nox Aa Rorr * Load hook and fastening clevises (short / 500 mm) The complete vehicle specification is available upon request. For further information, please do not hesitate to contact us.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Lrsdpfxoy Hm Eto Aa Ror Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: R-2000iA/200R R-J3iB, load capacity: 200 kg, arm reach: 2,928 mm, controller manufacturer: Fanuc, controller model: R-J3iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics®: Refurbished industrial robot. Reliability as standard. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: R-2000iA / 200R Controller: RJ3iB Lsdow I Aulepfx Aa Rjrr Payload: 200 kg Reach: 2928 mm Delivery time: To be agreed IRS Robotics® refurbished: 77-point protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily business is the reliable supply of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established 2002. We ship worldwide.

Condition: used, mileage: 173,238 km, power: 200 kW (271.92 HP), first registration: 09/2020, fuel type: diesel, maximum load weight: 7,580 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 4,760 mm, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 44 m³, loading space length: 7,280 mm, loading space width: 2,490 mm, loading space height: 2,440 mm, Year of construction: 2020, Equipment: air conditioning, cruise control, differential lock, tail-lift, trailer coupling, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies. Engine: OM936, R6, 7.7 l, 200 kW (272 hp), 1100 Nm, High Performance Engine Brake, differential lock on rear axle, air suspension, rear axle, trailer brake, 2-line system, trailer hitch, S-cab, S-cab, adjustable air deflector, main mirror, electric, driver's side, air conditioning, driver's comfort seat, comfort features, power windows, electric, on both sides, rain/light sensor, lane keeping assist, Active Brake Assist, airbag, driver, cruise control, LBW Bär, 2000 kg, 2400 sheets. Lrsdezaxm Iopfx Aa Rjr

Condition: used, mileage: 652,000 km, first registration: 09/2015, axle configuration: 4x2, Year of construction: 2015, DB Antos 1827 L 4x2 flatbed truck with sliding tarp and EDSCHA roof system Chassis: • Emission standard: EURO 6 • Engine power: 200 kW / 272 hp • Displacement: 7,698 cm³ • Classicspace cab • Automatic transmission • Cruise control • Automatic climate control • Auxiliary heater • Reinforced engine brake • Hill start assist • Differential lock • ASR (traction control) – deactivatable • Leaf suspension at the front • Air suspension at the rear • Disc brakes • Multifunction steering wheel • Airbag • Refrigerator • Central locking • Electric windows and mirrors • Bluetooth hands-free system • CD radio • CB radio • Telephone • Navigation system • 1 folding bunk/bed • Auxiliary heater • Roof spoiler • Tow hitch – jaw-type coupling • 1 x 400-liter aluminum tank • Gross vehicle weight: 18,000 kg • Unladen weight: 8,175 kg • Payload: 9,825 kg Vehicle overall dimensions (external): • 9,650 x 2,550 x 3,450 mm • Wheelbase: 5,200 mm Tires: • 1st axle: 385/65 R 22.5 • 2nd axle: 315/70 R 22.5, on steel rims • Tire tread depth: 10/11/14/14/13/14 mm Body: • TITGEMEYER flatbed body • Year of manufacture: 2015 • Sliding tarp Lodpfjwmmydox Aa Rorr • EDSCHA sliding roof system • Stake pockets and rails • Internal platform dimensions: 7,260 x 2,490 x 2,000 mm (LxWxH) - TÜV (roadworthiness inspection): valid until 09/2025 - SP (safety inspection): valid until 03/2026 - Optionally, new inspection available upon request and at extra cost! - German vehicle! Subject to errors and prior sale!

Condition: used, Year of construction: 2015, overall weight: 300 kg, load capacity: 5 kg, terms of delivery: FCA Pegnitz Lsdpfx Ajzrh Nzja Rsrr delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software expansion: Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Lrsdpfszmyfwox Aa Rer Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos.

Condition: good (used), Year of construction: 2011, Demmeler Turning Unit Robotix IP 4000 Max. height: 3500 mm Servo-hydraulic drive Length: adjustable from 1000 to 12,000 mm Permissible weight: 11,000 kg Lrodpfx Aow Rq Thsa Ror Rotation: 360 degrees endless

Condition: used, mileage: 299,230 km, power: 213 kW (289.60 HP), first registration: 12/2017, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal vehicle number: 1185 * MAN A47 Lion's City M NL 293-10.5 * Power output: 213 kW * Emission class: Euro 6 * First registration: 12/2017 - MODEL 2018 * FINAL PRICE * Maintenance records for the past few years are available. * Small excerpt from the maintenance log: * 04.03.2026 298 801, AIR SPRING/ROLLING BELLOW, REAR AXLE, ALL, REPLACE * 02.02.2026 295 925, INNER SWING DOOR, ENTRANCE 2, INSPECT AND REPORT * 20.01.2026 295 113, PERFORM LIGHTING CHECK * 20.01.2026 295 113, V-BELT ALTERNATOR, R-ENGINE 6-CYL, REPLACE * 20.01.2026 295 113, Lubricate vehicle * 20.01.2026 295 113, Intermediate inspection / SP * 20.01.2026 295 113, DISC BRAKE CALIPER, FRONT AXLE, LEFT, WHEEL REMOVED, REPLACE * 20.01.2026 295 113, V-BELT DRIVE COMPONENTS, INSPECT AND REPORT * 03.12.2025 SHOCK ABSORBER, REAR AXLE, LEFT FRONT, REPLACE * 01.09.2025 ENGINE MOUNT, R-ENGINE 6-CYL TURBO, LEFT + RIGHT FRONT, REMOVE, INSTALL * 25.08.2025 COOLANT PUMP, Engine D0836 LOH CR, replace * 21.07.2025 277 190, FUEL TANK STEEL, REPLACE (REMOVAL FROM BELOW) * 21.07.2025 277 190, AIR SPRING/ROLLING BELLOW, REAR AXLE, ALL, REPLACE * 21.07.2025 277 190, STEERING TIE ROD, REPLACE * MAN A 47 Lion's City Midi Lodpfx Aoyzlwqea Rsrr * 213 kW (290 hp) / Euro 6 * From 1st owner * Maintenance history available * L o w original mileage * Destination displays front/side/side/rear with Gorba control unit * Convector heater * Fan at door 2 * 2x USB socket at the driver's seat * D1/D2/D3/D/N/R - Automatic transmission * Air conditioning * Mechanical folding ramp * Retarder * Trash can/umbrella holder * Hand loops * Video surveillance Rosho and reversing camera Rosho * 33 seats (including driver) * 49 standing places * and more. Note: The customer is obliged to independently verify the condition and equipment of the goods/vehicle! All information without guarantee We reserve the right of prior sale We refer to our general terms and conditions.

Condition: used, Very handy and ergonomic, easy to use stroboscope with high lighting intensity (up to approx. 50 cm distance) and low energy consumption. Design with plug-in exchangeable battery pack. High frequency stability and easy adjustment with frequency doubler and splitter. Phase shift + / - 6° for observing different positions. Sensor input for external trigger. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFNL016 Ljdpfx Asxzh Upja Rerr Listing name: ALLURIS SMS 400 StroboVision Stroboscope

Condition: new, Additional photos can be provided upon request. The price is negotiable. For more machines, parts, and other materials, please also visit our website, CNC-Service. Do you have any questions, or are you looking for something specific? Please do not hesitate to contact us! Ljdpfxeztpaqe Aa Rorr

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Lsdpfezl N Tusx Aa Rorr Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: excellent (used), High-quality FANUC wire EDM machine in excellent condition. The machine is well-maintained, ready for operation, and suitable for precise wire EDM applications in tool, mold, and precision machine manufacturing. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of Manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Power supply: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic wire threading Full immersion machining Suitable wire diameter: 0.10–0.30 mm Lsdpfxszrzzde Aa Rjrr Upon request, we will gladly send you a video.