Used Sip Jig Boring Machine - Vertical for sale (66,732)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 9,999,999 h, functionality: fully functional, machine/vehicle number: 11898, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 32 kVA, controller manufacturer: Heidenhain, controller model: TNC 430, total height: 2,930 mm, total length: 2,700 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, table load: 1,500 kg, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 999,999 h, coolant supply: 3 bar, spindle motor power: 10,500 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Hermle C800V X=800 Y=600 Z=500 Table size 1000x560 Table load 1500kg Machine is fully functional. Sold without clamping devices. 15,000 1/min, SK40. HDH TNC430, (without coolant through spindle, without chip conveyor). Kledpfx Aszd Aimjb Isu The machine can be inspected in production until June 24th, or by arrangement. Delivery is included within a 300km radius of Bonn, to the curb, without unloading, between June 30th and July 9th. For greater distances, the difference must be covered by the buyer. This offer is only valid for buyers from Germany. Machine location near Bonn.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Klsdpfxezdqk Ej Ab Isu

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training Kodpfx Abovtz Dxs Ielu - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: new, Year of construction: 2025, Machine Specification: Travel distances: - X axis travel: 850 mm - Y axis travel: 500 mm - Z axis travel: 500 mm - Spindle nose to table: 150–650 mm Table: - Table size: 1000 x 500 mm - Max. load: 600 kg - T-slots on table: 3 x 18 x 125 mm Spindle: - Drive type: Built-in - Max. speed: 15,000 rpm - Power: 11/18.5 kW - Torque: 45/60 Nm - Tool holder: BBT 40 - Pull stud: MAS403-P-40T-I (45°) Feed rates: - Rapid traverse (X/Y/Z): 30/30/30 m/min - Cutting feed (X/Y/Z): 10/10/10 m/min - Ball screw diameter (X/Y/Z): 40 mm Tool magazine: - Capacity: 24 tool positions - Type: BBT 40 - Max. tool diameter (with adjacent pockets full/empty): Ø80/Ø150 mm - Max. tool length: 300 mm - Max. tool weight: 8 kg - Tool-to-tool indexing: 2.5 sec Precision: - Positioning accuracy (X/Y/Z): 0.006/0.005/0.005 mm - Repeatability (X/Y/Z): 0.004/0.003/0.003 mm Other features: - Machine weight: 6 t - Dimensions (LxWxH): 2640 x 2870 x 2760 mm Standard configuration: - Mitsubishi M80VB CNC - 15,000 rpm built-in spindle - Spindle cooling - Workpiece air cooling - Machine bed flushing - External coolant tank - Full enclosure - Air gun - 3-color signal lamp - Standard accessories - Documentation Kedpfx Abow Rcxvj Ielu - CE Options: - FANUC PLUS 3A - Mechanical spindle 12,000 rpm (BBT40) - Kessler spindle 20,000 rpm (HSK-63) - Control panel air conditioning - Spindle ring cooling - Through-spindle coolant 20 bar - Oil separator - CNC 4th axis - Oil mist separator - Glass scales - Automatic door - 24/30-tool magazine Machine is equipped with: - Spindle ring spray cooling - Heidenhain linear scales on three axes - Through-spindle coolant 20 bar - Chain-type chip conveyor with chip cart - Workpiece rinse water gun (automatic switching) - FANUC PLUS 3A+ 15-inch monitor (CE configuration) - 30-tool servo magazine - Oil-water separation device - HSK-A63 interface for electric spindle tool holder - ROTOCLEAR - HPC500II lifting tool - Software interfaces for BLUM tool measurement and workpiece probing system (TC60) - MOV850 lifting tool - 2-year full machine warranty - Pre-rinse water system inside the machine - Control cabinet air conditioning

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Kodpfxsw I Hzpj Ab Iolu Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available.

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Kledpfx Abswka Hfs Ieu Location: Röllbach

Condition: used, Used machine Klsdpfjw I Unwox Ab Iju Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Features and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and from the end face - Swivel: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs - Clearance: max. 100 mm height and max. 640 mm width Klsdpfx Absxwz Ihj Iju - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a variety of stops (see pictures) Availability: short notice Storage location: Röllbach

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) Kledsx Icyvjpfx Ab Ieu - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 700 mm Kedpfxjzdvglo Ab Ijlu z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t

Condition: used, Year of construction: 2004, turning diameter 250 mm swing diameter 250 mm turning height 250 mm Kjdszdvgfspfx Ab Islu Control Siemens Sinumerik 840 D total power requirement 60 kW weight of the machine ca. 9 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAM 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle reference line: -20 to 430 mm Kledpjy I Sfhefx Ab Iou - Distance between B-axis center and spindle reference line: 4 - 410 mm - Distance between B-axis center and spindle reference line: -10 mm - Distance between pallet center line and bed 0-point: 265 mm - Distance between pallet center line and Y 0-point: 180 mm - Internal diameter of the spindle bearing: 70 mm - Tool clamping force: 7.0 kN - Feed rate B-axis: 30/min - Feed rate C-axis: 50/min - Max. tool diameter: 80 mm, with free secondary stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: includes the tool holders located on the tool changer! Note: the machine can be transported on a truck up to 2700 mm wide! Note: the item must be picked up between August 24 and August 27, 2026, on a date to be determined. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 19859, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 44 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 31i, total height: 3,200 mm, total length: 7,000 mm, total width: 6,000 mm, rotary table diameter: 500 mm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,315 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 62 A, Equipment: chip conveyor, documentation/manual, MATSUURA MX-520 Universal Machining Center - Tool holder: SK 40 - A-axis travel: -125° to +10° - C-axis travel: 360° Kodpfxey I Sq Rj Ab Ijlu - 5-axis NC rotary table: 500 mm diameter - Includes the tool holders shown in the photos! - Includes coolant system, extraction system, and chip conveyor Note: The machine vise shown on the rotary table is not included in the scope of delivery! Note: The machine can be transported on a truck with a width of up to 2500 mm! Note: The item must be collected between August 24th and August 27th, 2026, on a date to be agreed upon. FCA D-61352 Bad Homburg - loaded onto a truck

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Kjdpfx Abjzditys Ijlu Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min Kledpfxjy At Iys Ab Iju AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: used, Year of construction: 2007, x-travel . mm y-travel . mm z-travel . mm control SIemens type Shopmill 840 D Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Klodpfx Abezdu Ubj Ieu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, x-travel . mm y-travel . mm z-travel . mm control SIemens type 840 D ECOLINE Shopmill Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Klodpfx Aszdu Tdeb Iju please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2012, Machine in very good condition, worked very little. Kjdpfozf Aq Hox Ab Islu Spindle Taper #40 Spindle RPM 8000 Tool Magazine 16 Table Length 750 mm Table Width 400 mm X Travel 610 mm Y Travel 400 mm Z Travel 460 mm Multi-Axis 3 Control FANUC

Condition: good (used), Year of construction: 2009, functionality: fully functional, 3 x Hyundai-Kia / WIA VX500 CNC Vertical Machining Centers A total of 3 identically equipped Hyundai-Kia / WIA VX500 CNC vertical machining centers are for sale. All three machines are located next to each other at the same site and are identically equipped, each including a mounted 4th axis / NC rotary table on the machine table. Manufacturer: Hyundai-Kia Machine / WIA Corporation Model: VX500 / VX500 F21i-MB Machine Type: CNC Vertical Machining Center Control: FANUC Series 21i-MB Number of Machines: 3 units Year of Manufacture: 2007 & 2009 Tool Clamping: BT40 / NT40 Tool Magazine: 30-position 4th Axis: Yes, each mounted Machine Weight: approx. 7,000 - 7,500 kg per machine Technical Data per Machine Travel X-axis: 1,060 mm Travel Y-axis: 510 mm Travel Z-axis: 635 mm Table Size: 1,200 x 500 mm Max. Table Load: 800 kg Spindle Speed: 80 - 8,000 rpm Optional / possible according to documentation: up to 10,000 rpm Spindle Power: 15 / 11 kW Spindle Clamping: BT40 / NT40 Rapid Traverse X/Y: 36 m/min Rapid Traverse Z: 30 m/min Working Feed: 1 - 15,000 mm/min Smallest Input Unit: 0.001 mm Positioning Accuracy according to documentation: ±5 µm over full travel Repeatability Accuracy according to documentation: ±2 µm Tool Changer Automatic Tool Changer Tool Magazine: 30 positions Tool Call: Random Max. Tool Diameter: 90 mm Max. Tool Length: 300 mm Max. Tool Weight: 8 kg Tool Change Time Tool-to-Tool: approx. 3 seconds Chip-to-Chip Time: approx. 7 seconds Equipment per Machine FANUC Series 21i-MB CNC Control 4th Axis / NC Rotary Table, mounted Automatic Tool Changer 30-position Tool Magazine BT40 / NT40 Tool Clamping Coolant System Spindle Cooling / Main Shaft Cooling Unit AR Filtrazioni Oil Mist Extractor / Filtration System Full Protective Enclosure Work Area Lighting Electronic Handwheel / MPG Load Meter Spindle Override Feed Override Feedrate Override Chip Conveyor Function on Control Panel Automatic Door Function on Control Panel Tool Holders visible in the Magazine Clamping Devices / Vise or Fixture visible in the Work Area Description The machines are suitable for general CNC milling operations, toolmaking, jig and fixture manufacturing, single-part production, small-batch production, and precise machining operations. Klsdpfx Abszdv R Ro Isu Due to the mounted 4th axis, the machines are suitable not only for conventional 3-axis milling but also for 3+1 machining. All three machines are located next to each other and can be offered together as a package or, if necessary, individually.

Condition: good (used), Parts on table not come. Marked with red. Kljdpfxowxdyxo Ab Iju

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Klodpswk Nm Iefx Ab Isu 10.000 rpm

Condition: used, Year of construction: 1996, Drilling head with 21 spindles, pitch 32 mm, working width: 640 mm, portal passage: approx. 750 mm, drilling stroke: 100 mm, positional adjustment of the drilling unit: 0-45 mm, positional adjustment of the hole pattern: 0-300 mm, spindle speed: 2800 rpm, shank diameter of the drill: 10 mm, clamping height of the workpieces: max. 100 mm, motor: 1.5 kW, working height: 850 mm, compressed air connection: 6 bar, weight: approx. 400 kg. Kedpfsy Dd I Hex Ab Islu Location: Nattheim.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm Klsdjzd Dv Iopfx Ab Iju z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Ksdpfx Abjzd Dvne Islu Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MV0009-001573, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 33 kVA, overall weight: 5,000 kg, type of input current: three-phase, Doosan DNM 400 – Vertical Machining Center. CNC milling machine for precise metalworking. Suitable for drilling, milling, and tapping operations. Reliable and accurate, ideal for industrial use. Kledpfjy Exg Hsx Ab Isu