Used Sipa Lux for sale (321)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Trilux strip light system from 2016. Model: 7650B LED4000-840 ET with Philips Xitanium ballast 75W. Trilux 07650/II/35/-5LV-2.5mm support profile Incl. Trilux light insert & Trilux LED bulb. IP20, element length 3.1m and 4.75m. Minimum order is 10 elements or 47.5m Support profile for modular strip light system, with 5-conductor through-wiring, sheet steel, galvanized, coated with white polyester resin paint, for 2 lamps 35 W long. With heat-resistant single wires 5 x 2.5mm², 5-pin socket plug pair for quick electrical connection from support profile to support profile and one 5-pin isolating plug top for each lamp length. Made in Germany In total, 1600 linear metres of this system are available. Simply state the quantity required, the price varies depending on the quantity purchased. Ljdpjvtf Ubsfx Altohk Goods are in stock and immediately available. Shipping only possible for orders of 500 linear metres and above at an additional cost!

Year of construction: 2003, condition: used, Mobile cooking station with a ceramic cooktop/griddle and a bain-marie. Lsdpfoh Euuzex Altehk

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing cart Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2 x 500 kg per compartment = 1000 kg Compartment dimensions per slot W x D = 300 x 920 mm Compartment dimensions without center divider W x D = 655 x 920 mm Adjustable height: 80 to 200 mm Lhodpfxefgpfpe Altsk - Center divider can be removed - Also suitable for flat materials - 16 galvanized steel rollers Ø 50 mm - 4 swivel casters Ø 100 mm, 2 with brakes - Swivel casters individually adjustable in height via threaded rods Overall dimensions L x W x H 1050 x 950 x 615 mm Weight: 85 kg Good condition

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece Ljdpfxovbu Awe Altjhk

Year of construction: 2022, condition: new, New! Lsdpfxslrtdbs Altjhk Roof cutout dimensions: 2,350 x 13,000 mm Light panel order dimensions: 2,550 x 13,311 mm

Condition: new, New 64-zone hot runner controller. Used for only 2 hours to sample a mold. From a cleanroom production line for pipette tips. Equipped with Harting connectors for sensors and temperature. Plug in and ready to run. Lsdpsxk Txfofx Altehk

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) Ledpfjwfgbrex Altohk 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Lhedpfxoxa Hzxj Altjk Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Lodpfx Alexa Hx Rotehk Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. Lsdewfhu Hjpfx Altjhk ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. Lhedpfx Alowzmcbetok • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! Lhedpfx Alewdtfustjk ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. Lhodpjwzl Hxjfx Altok • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Lhodpfx Aljxa H Ewstsk If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Year of construction: 2013, condition: reconditioned (used), Steam ketlle Electrolux Variomix 200l with mixing arm. Unit after full renovation ( photos on demand) power 400V 50Hz 39kW. Pick up or shipping by Raben Ledpjxd Rp Isfx Altjhk

Year of construction: 2023, operating hours: 2,470 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1257.01, Wood scanner Luxscan EasyScan Smart NEW OptiCore AI Software Laser cameras 4 Colour cameras 4 3D & scatter lasers 4 Dot lasers (softwood) 4 Automatic camera positioning fix widths LED lighting devices 4 Ingoing lengths min./max. 1800 - 6000 mm Ingoing widths min./max. 40 - 155 mm Ingoing thicknesses min./max. 15 - 60 mm Ingoing widths min./max. (W210) 35 - 210 mm Width tolerance (per board – per bundle) +/- 3 mm Thickness tolerance +/- 3 mm Max horizontal field of view for top/bottom cameras -10 / +40 mm Max vertical field of view for left/right cameras -5 / +15 mm Maximum productivity: 30 boards of 2000 mm per minute 17 boards of 3600 mm per minute 10 boards of 6000 mm per minute Max real speed 180 m/min. 3rd generation of the high-speed optimizing cross-cut saw OptiCut 450 Quantum Operating device OptiCom Pro 15.6" Sawblade diameter 400 mm TCT-sawblade Sawblade bore 30 mm Ingoing lengths min./max. 1800 - 6300 mm Lodpfeyrpaiex Altshk Ingoing widths min./max. 40 - 200 mm Ingoing thicknesses min./max. 18 - 60 mm Cross sections generally rectangular Nominal cross sections (without board bend) min. 40 x 18 mm max. 200 x 50 mm max. 190 x 60 mm Feed speed infinitely variable max. 450 m/min. Acceleration max. 50 m/s² Motor power saw 7.5 kW (10 HP) Motor power feed system 15.0 kW (20 HP) Outfeed conveyor with 7 quick ejectors,

Condition: used, Beams for wide-span racking Manufacturer: Mecalux Model: ZE-55 Length: 1900 mm Stock: 60 units Matching shelves are also available. Lhedpfeyinuyjx Altsk

Condition: good (used), Without frames, only beams: Beams 3600*110 mm 467 pcs 22 EUR Beams 3600*120 mm 432 pcs 23 EUR Beams 3600*130 mm 20 pcs 24 EUR Beams 3600*150 mm 8 pcs 25 EUR Total for all beams: 18,540 EUR If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and we are happy to assist you with your planning. Further accessories available, e.g.: Frames, corner and collision protection, push-through guards, chipboards, grating, mesh rear panels, depth supports. Shipping: Please inquire about shipping costs, stating your postcode, location and the required quantity of items. Additional services: Planning, installation/dismantling of racking, purchase/sale Ljdepu Acfjpfx Altehk Technical data, specifications and prices are subject to change and prior sale!

Condition: good (used), Crossbars: 1250*40*40 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, and deep shelf supports are available. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving assembly/disassembly, purchase/sale Lhjdpfxsh Izuho Altsk Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Year of construction: 2012, operating hours: 25,897 h, condition: refurbished (used), Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm Max. roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). Ljdpeg H Tmbefx Altohk The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2012, condition: refurbished (used), machine/vehicle number: 25797, Automatic labeller Brand: Wilux, Type: PAS2202 / Label set II-A6310-RH-P Year of manufacture: 2012 Serial number: 25797 Maximum width of the roller: 80 mm Electrical connection: 230 V Own weight 80 kg Total size: L = 1000 mm x l = 800 mm x H = 1900 mm The machine has been tested and runs perfectly. Requires synchronization on the workflow with a transfer table/band and a bandwidth sensor. The labeller has a technical book and electrical drawings. For Romanian companies, there is the possibility of selling in instalments with a 50% advance. Price: 2900 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. You can make us a firm offer if you are interested in this automatic labeller. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Lhodpfx Aljg H Tl Tjtjk Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, number of seats: 49, gearing type: automatic, axle configuration: 4x2, emission class: euro3, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Adaptive cruise control - Autoradio - CD - EBS - Powered windows - Power windows front - Reverse camera QUICK HIGHLIGHTS ✔ Mercedes-Benz O500-RS 1936/30 Bus Chassis ✔ Marcopolo Viaggio 1050 G8 Coach Body ✔ 49 Executive Passenger Seats ✔ Mercedes-Benz OM460LA EURO 3 Engine ✔ 360 HP (265 kW) ✔ ZF TraXon AMT12 Automated Transmission ✔ ZF Retarder / Intarder ✔ Rear-Engine 4x2 Configuration ✔ Self-Levelling Air Suspension ✔ Valeo CC356W 40 kW Air Conditioning ✔ 8 m³ Luggage Compartment ✔ 500-Litre Fuel Tank ✔ Electronic Stability Program & EBS ✔ Reverse Camera with Dashboard Monitor ✔ Designed for Professional Passenger Transport Built for Professional Passenger Transport Reliable passenger transport requires more than simply moving people from one destination to another. Whether operating intercity routes, employee transportation, tourism services, private coach operations or regional passenger networks, operators need a bus that combines passenger comfort, dependable performance and practical operating efficiency. The Mercedes-Benz O500-RS 1936 with Marcopolo Viaggio 1050 G8 coach body has been developed around exactly these requirements. Combining the proven Mercedes-Benz OM460LA EURO-3 engine with a ZF TraXon automated transmission, rear-engine 4x2 chassis and modern Marcopolo G8 body, this passenger bus provides a professional transport solution designed for reliable daily operation. With seating for 49 passengers, powerful air conditioning and an 8 m³ luggage compartment, this vehicle offers the capacity and comfort required for both regional and long-distance passenger transport. Powered by the Proven Mercedes-Benz OM460LA Engine At the heart of the Mercedes-Benz O500-RS sits the proven OM460LA diesel engine. Producing 265 kW (360 HP), this EURO-3 engine provides the power required for professional passenger transport while maintaining the durability expected from Mercedes-Benz commercial vehicle EURO-3 configuration also makes the vehicle particularly relevant for international export markets where straightforward operation, serviceability and proven commercial vehicle technology remain important purchasing considerations. Engine & Driveline Highlights Lodpfx Aey R Arwjltjhk - Mercedes-Benz OM460LA Diesel Engine - EURO 3 Emission Standard - 265 kW (360 HP) - Rear-Engine Configuration - 4x2 Wheel Arrangement - Engine Brake - Power-Mode Function - EcoRoll Function - Cruise Control ZF TraXon Automated Transmission Passenger transport requires smooth and predictable power delivery. The Mercedes-Benz O500-RS is equipped with a ZF TraXon AMT12 automated transmission, helping provide efficient gear changes while reducing unnecessary driver workload during intensive daily transport operations. Combined with the EcoRoll and Power-Mode functions, the drivetrain can support different operating conditions while maintaining comfortable vehicle operation. A ZF Retarder / Intarder provides additional braking support, particularly useful during intensive passenger transport and routes involving frequent braking or varying terrain. Marcopolo Viaggio 1050 G8 Coach Body A reliable chassis is only one part of a professional passenger bus. The Marcopolo Viaggio 1050 G8 body combines...

Condition: excellent (used), mileage: 56,154 km, power: 55 kW (74.78 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: diesel, fuel tank capacity: 54 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,490 mm, total width: 1,860 mm, total height: 1,810 mm, permissible axle load (axle 1): 1,170 kg, permissible axle load (axle 2): 1,070 kg, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, sliding door, soot filter, tire pressure monitoring, traction control, = Additional Options and Accessories = - Alarm system - Armrest - Audio controls on the steering wheel - Exterior mirrors with turn signal indicator - AUX input - Outside temperature display - Becker phone holder - Heated mirrors - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Rear doors - Serviced by dealer - Height-adjustable steering wheel - Height-adjustable front seats - Folding exterior mirrors - Comfort seats - LED lighting - Center armrest - Multifunction steering wheel - Rear parking sensors - Particulate filter - Radio/CD player - Disc brakes - Headlight leveling - Sliding side door Lhjdpfx Alszvx Upetjk - Immobilizer - Partition - Partition without window = Additional Information = General Information Number of doors: 5 Cab: single cab Technical Information Number of cylinders: 4 Engine displacement: 1,461 cc Maximum front axle load: 1,170 kg Maximum rear axle load: 1,070 kg Weights Unladen weight: 1,383 kg Payload: 637 kg GVWR: 2,020 kg Functional Height of the loading area: 56 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 09/2027 Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van, or truck. The stated price is the "internet take-away price." For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), mileage: 213,774 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,090 mm, first registration: 05/2021, fuel tank capacity: 80 l, emission class: euro6, color: black, suspension: steel, tire size: 265/65R17, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, General information Number of doors: 2 Cab: one and a half Registration number: VKJ-32-T Technical information Number of cylinders: 4 Engine capacity: 2.393 cc Drivetrain AdBlue system: Yes Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 265/65R17 Brakes: disc brakes Front axle: Max. axle load: 1450 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1920 kg; Tyre profile left: 90%; Tyre profile right: 90% Measures Dimensions (LxBxH): 533 x 186 x 181 cm Weights Empty weight: 2.040 kg Carrying capacity: 1.110 kg GVW: 3.150 kg Maintenance APK (MOT): tested until 01/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - All wheel drive - Bluetooth - Bumpers in color - DAB Radio - Differential Lock - Door mirrors in colour of body - Electrically operated windows Lhedpozu S Sfsfx Altok - Electric folding mirrors - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Reversing camera - Side skirts - Slip differential - Spare wheel - USB Connection = Remarks = VIDEO: Very beautiful and neat Toyota Hi-Lux 2.4 D4d 150 HP Euro 6 CI 4WD / 4x4 / Four-wheel drive Extra cab / One-and-a-half cab Tow bar 3350 kg 213,000 km NAP Fully dealer maintained Technically and visually in very good condition

Condition: used, mileage: 345,450 km, power: 368 kW (500.34 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 8,876 kg, maximum load weight: 9,124 kg, overall weight: 18,000 kg, wheelbase: 3,600 mm, next inspection (TÜV): 08/2027, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of seats: 2, Equipment: ABS, air conditioning, airbag, cabin, central locking, compressed air brake, cruise control, electronic stability program (ESP), navigation system, parking heater, power assisted steering, Interior * Automatic climate control Lhsdpszvq Izjfx Altjk Comfort and Environment * Auxiliary heater * Cruise control Other * Emission standard Euro 6, green environmental badge * Exterior color: metallic, BLUE LIGHTNING * Bluetooth hands-free system * Ford F-Max Luxury Pack (LUX) * Air suspension on rear axle * Hydraulic retarder * Navigation system with map display * Winter package/J: Heated windshield Other: * Nationwide delivery for €399 net plus VAT (€474.81 including VAT). * For all vans: 12 or 24 months of Mercedes-Benz used car warranty can be provided upon request. * We will gladly take your current vehicle in trade, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors. * Errors and prior sale reserved.