Used Skymaster Vm 2018 for sale (2,285)

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, Schmalz vacuum lifter for heavy panels with new suction rubber Load capacity 150kg horizontal and vertical Suction pad is motor-driven and swivels 90 degrees Suction box 1000 x 675mm Acoustic warning signal in case of low vacuum 400V, 1.5kW Can be attached to an on-site chain hoist CE marking Gisdpfx Ajv S Synelmot No inspection book available Suction rubber renewed Like-new condition The machine can be demonstrated at our facility by appointment. We only offer machines that are in stock and ready for demonstration – see "more offers from this supplier".

Condition: good (used), Year of construction: 2018, operating hours: 8,658 h, load capacity: 3,000 kg, lifting height: 6,040 mm, fuel type: gas, mast type: triplex, construction height: 2,725 mm, empty load weight: 4,861 kg, mileage: 8,658 km, This triplex LPG forklift from the German brand Still is from 2018 and is in good condition.Capacity 3,500 kg.Lifts up to a height of 6,040 mm.Clearance height is 2,725 mm.Equipped with FREELIFT and SIDESHIFT.8,658 hours on the clock.Watch the video on YouTube. Gjdpfx Aloyma T Asmoit

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 Screw Compressors Previously used for pneumatic unloading of railway wagons. Manufacturer: Aerzen Model: VM 30 Volume flow rate: 27.17 m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell-and-tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2,800 mm Width: 1,150 mm Height: 1,770 mm Weight: approx. 2,750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular servicing was carried out by an authorized service company!! Giedpforkpp Hex Almot Units have not been in operation since 2019. Since then, they have been stored in a dry, heated location.

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Godpev Al Tijfx Almeit Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘ALTech ALbelt’ labelling device. Item for sale: 1 x ALTech ALbelt with the following features: From 2018 Gisdpfsymwqfjx Almot Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Applicable material: Food Power: 5 kW (7 HP) Empty weight: 640 kg Dimensions (LxBxH): 85 x 190 x 180 cm Working width: 40 cm Current frequency: 50 Hz Gjdpfxex Tcqre Almeit Voltage: 380

Condition: ready for operation (used), Year of construction: 2018, load capacity: 280 kg, arm reach: 3,080 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant model: KCP4, The KUKA KR280 R3080 is a high-performance 6-axis industrial robot designed for heavy-duty applications. With a 280 kg payload and 3080 mm reach, it is ideal for: Gedpfx Aloywrvxomsit Material handling – palletizing, loading/unloading, and large part transfer Welding – precise and stable spot or arc welding of large structures Machining – milling, grinding, and cutting with high rigidity Assembly – handling and positioning of large components Foundry and automotive – suitable for casting, mold handling, and car body assembly Model: KR 280 R3080 Payload: 280kg Arm Reach: 3080 mm Condition: Used & Tested Model: Year 2018 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 2018, offer consists of: - punch unit HP-200A Gisdpfx Asxr Ahlelmet Horizon HP-200A punch unit - features: press- and punch - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 356x508mm; min. 120x90mm - punch thickness: max. 4mm - speed: max. 4000 Broschüren/h - power: 230V / 50Hz - 0,68kW - dimensions: 500x770x1035mm - weight: 168kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2018, condition: used, For inquiries regarding the vibratory plate, Mr. Herden is at your service (by phone at ...). Ammann APH 6530 Vibratory Plate, Year of Manufacture: 2018, Operating Weight: 539 kg, Working Width: 700 mm, Electric Start, Engine: Hatz Diesel [10.1 kW / 14 HP], immediately ready for operation. Price: €4,490.00 net / €5,343.10 gross The vibratory plate is sold without a crank. Finance options available upon request. We are official sales and service partners for the following brands: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Equipment - Mercedes-Benz - Iveco With a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Giodpfx Aleymi Ivomet We offer the complete Weber MT product range! Errors and prior sale excepted. Internal ID: 288175 = Additional information = Unladen weight: 539 kg Please contact Marius Herden for further information.

Year of construction: 2018, condition: used, For inquiries regarding the vibratory plate, Mr. Herden will assist you (by phone). Ammann APH 6530 Vibratory Plate, Year of manufacture: 2018, Operating weight: 539 kg, Working width: 700 mm, electric start, Engine: Hatz Diesel [10.1 kW/14 hp], immediately ready for use. Price: €4,490.00 net / €5,343.10 gross The vibratory plate is sold without a crank. Upon request, we can also provide you with financing options. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. Gedjymi Ipspfx Almeit We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range! Errors and prior sale excepted. = Further information = Unladen weight: 539 kg Contact Marius Herden for more details.

Year of construction: 2018, condition: used, For inquiries regarding the vibratory plate, Mr. Herden will gladly assist you (via phone). Ammann APH 6530 Vibratory Plate, year of manufacture: 2018, operating weight: 539 kg, working width: 700 mm, electric start, engine: Hatz Diesel [10.1 kW/14 HP], immediately operational. Price: €4,490 net / €5,343.10 gross Gijdpfx Aeymi Iislmet The vibratory plate is sold without a crank handle. Financing options available upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni Telehandlers. We are an official sales and service partner for JCB Construction Equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale. = Further Information = Unladen weight: 539 kg Please contact Marius Herden for further information.

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer Heliostat -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos -Quantity: 4 pieces available Price: per piece Gedpfx Ajxu Atmjlmjit Dimensions: 930/670/H2870 mm -Weight: 123 kg/unit

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granule dryer Heliostat WFAT-8490 -Type: WFAT-8490 -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos -Number: 4 devices available -Price: per piece Gisdpfxow Tig Se Almjt -Dimensions: 820/550/H2460 mm -Weight: 96 kg/unit

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,666 h, laser hours: 5,666 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, positioning speed: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 3,280 kg, power: 6,000 kW (8,157.72 HP), overall weight: 27,700 kg, total length: 22,450 mm, total width: 6,670 mm, total height: 2,565 mm, working range: 20,248,100 mm, Equipment: cooling unit, It is a machine with few working hours and no faults. All parts are original and its maintenance has been done by the authorized service. Giedowpii Topfx Almst

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Gedoykrdbspfx Almoit

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm Giedpfjx Tpx Aex Almjt - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 2018, Technical data: Pos.1 - Dedusting VEN CLEAN Smart - Working width: 1,300mm - Length: 1,060mm - Roller transport: 1,000mm - Extraction fan 4,000m/h - Compressed air 980Nl/min. - Deduster Air nozzles - With ionisation Pos.2 - Automatic spray gun VEN SPRAY PERFECT - Year of construction 2018 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Part detection via light curtain - CNC 7000 control unit - Operating side right - Gun drive in Duo version Z16 - Dry extraction with filter - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - External filter box, LxDxH: 3500x1280x2740mm - Paint recovery system via V-belt - Infinitely variable feed speed 2 - 6m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1pc. Gedpfx Ajvvbqqslmsit - Number of spray guns installed 4 pcs. - Number of material pumps 1pc. - Supply air filter cover G5 - Length ~ 6,590 mm - Width 3,666 mm (+1152mm) - Height 2.500mm - Total connection 21 KW - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, from 01/2025 in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), functionality: fully functional, mileage: 757,000 km, power: 368 kW (500.34 HP), first registration: 11/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, spoiler, Man TGX 18.500 Euro 6 - First registered: 11/2018 - Retarder: Intarder - Mileage: 757,000 km - Navigation system - ADR AT certified - Tyres at 40% AT OUR OTHER BRANCHES WE ARE OFFICIAL MERCEDES-BENZ DEALERS D.E. TRUCK S.P.A. NAPLES (NA) LOCATION DOMENICO ESPOSITO S.P.A. EBOLI (SA) LOCATION OFFICIAL DEALER FOR FOTON TRUCK, PIAGGIO COMMERCIAL VEHICLES, and MAXUS DOMENICO ESPOSITO S.P.A. EBOLI (SA) and NAPLES (NA) LOCATIONS - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS ZERO DOWN PAYMENT TEL. Gsdpouki I Aofx Almjit - 0823 1686306 - 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 am to 7:00 pm SATURDAY 8:30 am to 2:00 pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA S-WAY S500-V8-660-770s-Limited Edition-semitrailers-refrigerated trailers-tipper-van-box trucks with tail lift and refrigerated cells-insulated vans with fridge and many more brands/models.)

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: VM-WO-250-90-0-2-AAM00064R, total length: 1,600 mm, load capacity: 250 kg, throat depth: 650 mm, Schmalz plate vacuum lifter, original packaging, year of manufacture 2024, with two suction pads, maximum plate load of 250 kg. Boom arm swivels 180°, up to 3500 mm. Suction plate design: transverse orientation. Suction pad length: 550 mm, width: 200 mm, quantity: 2 pcs. Accessories: Spiral hose for compressed air supply: 2500 mm, compressed air supply length to crane: 12 m, number of hose connections: 2 pcs. Weight: 0.00178 kg. Customs tariff number: 84289090. Country of origin: Germany. Gisdjycva Rjpfx Almot

Condition: good (used), Year of construction: 2018, operating hours: 14,026 h, load capacity: 1,800 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Still RX20-18 Triplex 450 Freelift / Sideshift Electric 2018 Giedpfxeyi Ut Aj Almot Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. carries a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). For a viewing and/or test drive you can make a non-binding appointment. Please call ahead as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 1720 kg Measurements height 2300 mm Dimensions Machine Length 3990 mm Main Drive Number of axis 6 This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information. Application Types Welding Gisdpox D Dizofx Almet

Condition: good (used), Year of construction: 2018, operating hours: 1,619 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 472 kg, mileage: 1,619 km, Well-functioning electric pallet truck Linde T16 from 2018; Capacity of 1,600 kg; 1,619 hours on the counter; Equipped with battery, external charger, and automatic filling system Godpfew Tk R Sox Almeit

Condition: ready for operation (used), functionality: fully functional, Cutter Stephan VM/MC 600/20 The Stephan VM/MC 600/20 Cutter is designed for workshops seeking an industrial machine capable of producing fine emulsions, homogeneous pastes, or complex preparations with high consistency. With its 600-litre bowl, it handles large volumes while ensuring perfect control over the final texture. Additionally, its vacuum operation enhances ingredient binding, intensifies natural colour, and reduces oxidation. As a result, products achieve a smoother, more stable structure that meets the demands of high-standard manufacturing. The robust stainless-steel frame and the mechanical design of the main knife ensure outstanding durability, even in intensive production environments. The 20 kW motor delivers ample power to process dense masses, guaranteeing consistent results, even during long production runs. Furthermore, easy access to components facilitates maintenance and reduces downtime, improving production continuity. The tilting bowl system allows for quick unloading, reducing product loss and speeding up recipe changeovers. The Stephan VM/MC 600/20 Cutter is suitable for a wide variety of products: cooked or raw sausage meat, processed cheese, fillings, sauces, plant-based preparations, or pastry products. Its integrated safety system ensures reliable use, while the option for automated operation simplifies daily supervision. Thanks to its versatility, power, and the high quality of the finished product, this cutter is an essential tool for industrial facilities looking to stabilise production, reduce process time, and guarantee consistent homogeneity in every batch. Technical Specifications: Gsdpfx Aox Hyp Sslmjit - Bowl capacity: 600 L - Knife motor power: 20 kW - Power supply: 400 V – three-phase – 50 Hz - Operation: Vacuum cutter - Unloading: Tilting bowl - Construction: Food-grade stainless steel - Year of manufacture: 1994

Year of construction: 2018, condition: used, For enquiries regarding the attachment, Mr. Herden is at your service (by phone). Digging bucket / Bucket / MS21 / 600 mm / Year of manufacture: 2018 / In stock & immediately available Price: €1,790.00 net / €2,130.10 gross - Cutting width (mm): 600 - Own weight (kg): 550 - Capacity (m³): 0.430 Gisdpjyi Abuefx Almst Equipment: - Incl. MS21 adapter We have a very large selection of various buckets in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni Telescopic Handlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB Construction Equipment. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! Internal no.: 083270 = More information = New: No Intended use: Construction Unladen weight: 550 kg For further information, please contact Marius Herden.

Condition: good (used), Year of construction: 2018, operating hours: 20,540 h, load capacity: 3,500 kg, lifting height: 5,950 mm, fuel type: electric, construction height: 2,750 mm, Still RX60-35/600 Triplex 595 Freelift/3rd/4th function electric 2018 Godpfx Aljyf A Sxemjit Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a fluctuating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not present at all times. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland