Used Sorting Gripper for sale (1,589)

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: S16W80-11-4, load capacity: 20 kg, arm reach: 1,717 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, teach pendant model: JZRCR-YPP01-1, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.06 mm, For sale is a Yaskawa Motoman HP20D 6-axis industrial robot with DX100 controller, teach pendant, connection cables, and a customer-specific pneumatic gripper/handling device. Technical data and specifications: - Model: Motoman HP20D - Robot type: YR-HP0020D-B00 - Year of manufacture: 07/2011 - Serial/order number: S16W80-11-4 - Axes: 6 - Payload: 20 kg - Horizontal reach: 1,717 mm - Repeatability: ±0.06 mm - Robot weight: 268 kg - Maximum pneumatic pressure: 490 kPa - Controller: Yaskawa DX100 - Controller type: ERDS-HP0020D-E02 - Power supply: 400/415/440 V, 3-phase, 50/60 Hz - Average connected power: 2.0 kVA - Full load current: 5.8 A - Teach pendant: JZRCR-YPP01-1 Visible scope of supply according to the images: - Robot arm on welded steel base - DX100 control cabinet - Teach pendant - Robot, operator device, and connection cables with CEE plug - Customer-specific pneumatic gripper/handling device Used condition with paint chips, scratches, and dirt. The robot has not been re-tested for functionality after disassembly; therefore, it is sold as untested. The function and suitability of the customer-specific gripper device have not been tested. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. Transport costs depend on the destination and scope. Sale subject to prior sale. Tedpfjz Ebn Uex Ahmec

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length Tjdoz Dv Uyepfx Ahmjc - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Tsdpsvzr Nbsfx Ahmsc Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Tsdpfxszzlhae Ahmoc Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. Todpfsz Eg Dzsx Ahmoc 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: used, Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR120 R2500 pro with Kräutner DKP1 rotary tilting table Year of manufacture: 2012 Operating hours: under 200 hours Reach: 2,496 mm Weight: 1,049 kg Payload: 120 kg Kuka KRC4 controller with 2 additional axes Year of manufacture: 2012 Weight: 140 kg Software: KSS 8.2.15 Tjdpfsxp N A Rsx Ahmjc User Tech 3.1.2 Expert Tech 3.1.0 Gripper-Spot Tech 3.0.1 Remote Service 1.0.0 Interface X11 for safety circuit Interface Beckhoff EtherCat for digital I/O Kuka TouchPad KCP4 Kuka connecting cables 28926

Condition: reconditioned (used), functionality: fully functional, Profile cutting center Scarabeo 55 CNC cutting center with 1 controlled axis, designed to cut PVC profiles with the highest cutting speed and quality. It consists of four different components connected in an automatic line: 1. Automatic bar stock magazine - steel body with 6 grippers moved by belts, driven by electric motors - max. capacity 8-10 profiles (depending on their width) - equipped with a bar presence detection device 2. Automatic Profile Feeding Unit 3. Automatic cutting unit - ø 500 mm blade - electromotor 3 kW, 2,800 RPM - cuts at three main angles: 45° – 90° – 135° - special centering device which allows the blade center of rotation to be positioned in the center of the profile section, so that wedge cuts can also be made automatically - equipped with a special evacuation system for waste and cutting chips - fully enclosed with a front door for free access to the cutting area for calibration, cleaning, and maintenance purposes - pneumatic pistol for blowing chips 4. Automatic unloading unit - automatic discharge device with pneumatic control - flat table for storing cut profiles - safety guard for moving parts Power: 7.2 kW Weight: 1,500 kg - Industrial computer - TFT color LCD screen - Keyboard - data retrieval from the keyboard or ON-LINE - control of each function on the monitor - Virtually unlimited number of data on the profiles to be cut - label printer with choice of format and letter size - collection of data on the remains of cut profiles (waste) - the ability to collect statistical data (weekly and monthly report) - Automatic fault diagnosis Sizes: width: 2300 mm, length: 12500 mm Tjdorungaepfx Ahmjc Completely refurbished, 6 months warranty on parts. Ready for work Available for viewing at the company's headquarters.

Condition: used, Year of construction: 2004, operating hours: 4,200 h, Equipment: all wheel drive, MAKE: VOLVO TYPE: EW160B YEAR: 2004 CE MARKED: YES OPERATING HOURS: 4200 HOURS (ORIGINAL) TIRES/UNDERCARRIAGE: 60%-10% POWER: 103KW ENGINE: VOLVO D6D-EJE 2 WEIGHT: 16200KG OPTIONS: 16,200 KG OPERATING WEIGHT HYDRAULIC QUICK COUPLER HYDRAULIC TILT BUCKET AIR CONDITIONING BLADE HAMMER HYDRAULIC LINES SORTING FUNCTION ORIGINAL HOURS!!! FULLY EQUIPPED KORENBLIK MACHINERY BV. VEENWEG 56 7336AG Todpfszmk S Uox Ahmoc APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: used, Year of construction: 2012, operating hours: 8,501 h, Equipment: all wheel drive, MAKE: DOOSAN TYPE: DX140 LCR Todjzg Sfiepfx Ahmoc YEAR: 2012 CE MARKED: YES OPERATING HOURS: 8501 HOURS TYRES/UNDERCARRIAGE: 50% POWER: 74KW ENGINE: CUMMINS QSB 4.5 WEIGHT: 14,800 KG OPTIONS: TRACK EXCAVATOR BLADE VA BOOM WORK LIGHT HAMMER LINES SORTING FUNCTION HYDRAULIC QUICK COUPLER AIR CONDITIONING KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Tedpfxsuc Idxj Ahmec Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: new, functionality: fully functional, operation weight: 175 kg, Year of construction: 2026, Equipment: CE marking, DB15 - one mesh screener running on 230V, easy to operate, and transport. Weight 175kg. Pull out handle and wheels for easy handling. Mesh mounted of any size from 2mm to 80mm. Tsdoxn Sflepfx Ahmsc

Year of construction: 2026, condition: new, Equipment: CE marking, • Mobile drum screener • Special trailer, category O2 (braked, tandem axle, up to 3500 kg) • Machine weight: 3369 kg • Globally homologated • Height-adjustable drawbar with overrun brake • Height-adjustable support legs • Double drum with replaceable mesh on both the outer and inner diameters • Mesh sizes from 2mm to 80mm, mesh width: 1260mm • Drum drive: electric, speed adjustment using a frequency converter • Outer drum diameter: 1300mm • Inner drum diameter: 1000mm • Screening capacity up to 30m3/h (depending on the input material) • Input feed conveyor: electric drive, speed adjustment using a frequency converter, hopper width (from the side of the machine): 2450mm • Side discharge conveyor for undersize fraction, smooth belt, width: 1000mm, electric drive Tedev D E Hxjpfx Ahmoc • Side discharge conveyor for oversize fraction or between-mesh fraction, Chevron belt, width: 600mm, with a 2-speed option, electric drive • Optional item: possibility of extending the drum for a third fraction

Condition: new, Equipment: CE marking, • Stationary drum screener • Double drum with replaceable screen on the outer diameter • Mesh sizes range from 2mm to 80mm, screen width 1260mm Todpfxjz H Iv Uj Ahmjc • Drum drive: electric, speed adjustable via frequency converter • Outer drum diameter: 1300mm • Inner drum diameter: 1000mm • Screening capacity: up to 30m³/h (depending on input material) • Input feeding conveyor: electric drive, speed adjustable via frequency converter, hopper width (side of the machine): 1879mm • 2100 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Bucket Screen buckets for screening all loose materials. Todpfx Aexpg Tgehmjc 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Various sizes, 2,3,4,5 or 6 shaft buckets

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Tedpfx Asz Ag Anehmoc Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: new, functionality: fully functional, overall weight: 580 kg, Year of construction: 2025, Single deck vibrating screener, option to purchase with extended front panels, lifting chains and petrol generator. The machine is delivered on a transport pallet. Change from transport to work position within minutes. Low operating costs. Very easy to transport. Tjdpfoxpg Ikjx Ahmsc

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. Tjdpfxok Aa Dwo Ahmec The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2015, Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Year of construction: 10/2015 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with FU 2x sorting slides (DUO Pusher) 2x light barrier Tedpfx Ask Aa Stjhmoc 1x deflection drum cover All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Todpjz Df Ucjfx Ahmjc Condition: Used – fully refurbished Status: In good working condition Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: new, Equipment: CE marking, 2 deck screener, including a built-in RPM meter of the screen box and aluminum wheel locking wedges. Possibility of delivery with petrol generator. Drawbar for easy transport for being towed by tractor or truck. The conveyor for fine fraction. Meshes mounted from 2mm to 100mm. Tsdpfez Hyaljx Ahmjc

Condition: new, functionality: fully functional, power: 5.5 kW (7.48 HP), operation weight: 4,800 kg, Year of construction: 2026, Equipment: CE marking, Double deck screener on a skid frame for easy transport. Possibility of adding petrol generator, hopper extension, Feeder plate with stop rubber, Extended hinged wing-plates, Extended screenbox chute, Rear cover for screenbox and removable skid frame hook. Low operating costs, simple change of meshes, robust dimensions, 2 conveyors for medium and fine fractions. Tedpfxoxpglie Ahmoc 4800kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Tjdsz Et E Eopfx Ahmoc The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, Year of construction: 2010, A Yaskawa robot cell for integration with CNC machines or production lines is offered. Robot type: YR-MH00005-E00, axes: 6, max. payload: 5kg, horizontal reach: 706mm, vertical working range: 1193mm, repeatability: +/-0.02mm, robot weight: approx. 27kg, control: Yaskawa DX100. Equipped with pneumatic Schunk gripper, SMC air preparation unit Series AC30 and 4 individual valves from the SY5000 Series. Including safety enclosure, pneumatic tubing, connection wiring, safety door switch and safety relay. The interface for integration with a CNC production machine or production line is prepared. An on-site inspection is possible. Tsdpfx Ahezxr Rvsmoc

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. Tedpfsz Ia A Aex Ahmec 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders Todpfsy E I Hiex Ahmjc • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes