Used Stenner Band Saw Machines Stenner St 100 2003 for sale (88,976)

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm Ksdpfx Ahog U Uv Rj Aodp 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Kdodpfx Asw D T Dkeh Asp Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges Kdodpfx Aod Hx Uqoh Aop 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: new, Year of construction: 2026, Optimum Metal Bandsaw OPTIsaw S 275NV Metal bandsaws with a swiveling saw blade. S 275NV with continuously adjustable saw blade speed. Article number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400mm Width/Depth (product) approx. 685mm Weight (net) approx. 185kg Width/Depth max. (product) approx. 985mm Kdodpegx T I Ujfx Ah Aep Height max. (product) approx. 1700mm Electrical data Power of drive motor 1.5kW Connection voltage 230V Mains frequency 50Hz Motor power of coolant pump 90W Machine data Saw blade speed(s) 20 – 90m/min Saw blade length 2480mm Saw blade width 27mm Saw blade thickness 0.9mm Cutting angle 0 – 60° Feed rate continuously adjustable Raising of the saw blade manually Cutting ranges Cutting range 0° round (solid material) 225mm Cutting range 0° square (solid material) 190mm Cutting range 0° rectangular (lying) (solid material) 150 x 245mm Cutting range +45° round (solid material) 145mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular (lying) (solid material) 190 x 150mm Cutting range +60° round (solid material) 90mm Cutting range +60° square (solid material) 90mm Cutting range +60° rectangular (lying) (solid material) 120 x 90mm Explanation of cutting range: The cutting range is determined using aluminum due to the weight of the saw blade. It may vary when using different materials and may be smaller in some cases (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Kdedjv Sg T Njpfx Ah Ajp Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Ksdpfx Ajxw N Sboh Asdp Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Kjdpfx Ahei Anadj Aedp Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Kodji Am Ukjpfx Ah Aedp Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale is a high-quality BOMAR Proline 420.350 H. This machine impresses with its robust two-column design, high cutting accuracy, and ease of operation. It is ideally suited for professional use in the steel trade, metalworking, mechanical engineering, and industrial manufacturing. Thanks to the stable guidance of the saw arm and the steplessly adjustable band speed, the machine enables economical and precise cuts, even with demanding materials. The Proline series is considered a reliable industrial machine with a long service life. Technical data: Manufacturer: BOMAR Model: Proline 420.350 H Type: Semi-automatic Design: Two-column band saw Cutting angle: 90° Max. round material: Ø 350 mm Max. rectangular material: 420 × 350 mm Saw band dimensions: 4,780 × 34 × 1.1 mm Band speed: steplessly adjustable 20–120 m/min Drive power: 3 kW Power supply: 400 V / 50 Hz Material support height: 780 mm Machine weight: approx. 800 kg Machine dimensions (L × W × H): approx. 2,325 × 1,197 × 1,997 mm Equipment: Robust two-column guide Steplessly adjustable cutting speed via frequency converter Hydraulic saw feed Automatic cutting pressure control Kdodpfxjzlz N Ie Ah Aop Split full-stroke clamping device Carbide saw band guide Coolant system Chip brush Industrial design for continuous operation Condition: Used Technically functional Ready for immediate use Inspection under power is possible by appointment. Scope of delivery: Band saw BOMAR Proline 420.350 H 4m roller conveyor on the feed side 4m roller conveyor on the discharge side Manual measuring stop Operating manual (digital) Accessories as per inspection Inspection / Shipping An inspection of the machine is highly recommended. Loading can be supported upon agreement. Transport can be arranged upon request. Errors, changes, and prior sale reserved.

Condition: good (used), Year of construction: 2012, power: 3.7 kW (5.03 HP), Well-maintained semi-automatic bandsaw Knuth model HB 380, year of manufacture 2012 Cutting Capacities Cutting capacity 90° (rectangular): 520x380 mm Cutting capacity 90° (round): 380 mm Cutting capacity 90° (square): 380 mm Cutting capacity 45° (rectangular): 300x380 mm Cutting capacity 45° (round): 300 mm Cutting capacity 45° (square): 300 mm Cutting speed: 20 - 100 m/min Power: 3.7 kW Blade dimensions: 4,800x34x1.1 mm Dimensions: 2,850x1,660x930 mm (W x H x D) - Hydraulic workpiece clamping Kjdpfoyxw H Esx Ah Ajdp - Automatic lift height adjustment Shipping can be arranged upon request.

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Kedpfx Aeu Rdr Rsh Aedp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Kjdpfx Asxx Uxijh Aodp

Condition: excellent (used), saw blade diameter 20 - 400 mm workpiece-spindlehead motor 0,1 kW grinding wheel diameter 150 x 30 mm Kdedpfx Aozlkyceh Aop total power requirement 0,4 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,6 x 0,4 x 1,2 m

Condition: used, Year of construction: 2008, cutting diameter 1500 mm saw band length 15050 mm cutting width 2000 mm total power requirement 45 kW weight of the machine ca. 43.500 kg required space 3862 x 2110 mm FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Manufacturer: FRIGGI S.r.l. Address: Via Vitt. Veneto 13, 20086 Motta Visconti (MI), Italy Model: 2MF GANTRY Type / Version: 1500 x 2000 x 9000 Serial Number: 3610 Year of Manufacture: 2009 Weight: 43500 kg CUTTING CAPACITY Rectangular Profile: 1500 x 2000 mm Round Profile: Ø 1500 mm Gantry Stroke: 9600 mm SAW BLADE Band Dimensions: 80 x 1.6 mm Max. Band Length: 15050 mm Band Speed: 10 – 120 m/min DRIVES Band Motor Power: 18.5 kW Bow Motor Torque: 12 Nm Gantry Motor Power: 2 x 12 Nm Flywheel Diameter: 2x 1200 mm + 2x 620 mm HYDRAULICS Hydraulic Tank Capacity: 120 Liters Kjdpfx Aszk Rh Roh Aodp Hydraulic Pump Flow Rate: 23 l/min Hydraulic Pump Motor Power: 4 kW ELECTRICAL DATA Installed Power: 45 kW Supply Voltage: 400 V Max. Current Draw: 80 A Frequency: 50 Hz Power Factor: 0.8 COLOR Structure Color: RAL 7039 Flywheel Covers Color: RAL 7021 Moving Parts Color: RAL 2004 TYPE PLATE / CE DECLARATION CE Marking: Yes (Directive 98/37/EC etc.) CE Declaration Date: 19.03.2009

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 250 mm, total height: 1,750 mm, total length: 2,500 mm, total width: 2,300 mm, overall weight: 2,500 kg, For sale is a fully functional KASTO twin AE3 – a robust horizontal bandsaw machine for the reliable and economical cutting of solid and profile materials in general mechanical engineering, as well as in series and single-piece production. With a maximum material width of approximately 250 mm and a clamping height of approximately 200 mm, the machine is suitable for clean cutting of a wide variety of materials and cross-sections. The well-thought-out design, with a feed length of approximately 2200 mm and a material discharge length of approximately 1600 mm, ensures a comfortable and efficient material flow. The machine is complemented by two discharge roller conveyors, each with a length of approximately 1000 mm, resulting in a total material discharge length of approximately 4000 mm – ideal for the safe handling of even longer workpieces. The compact design, with dimensions of 2500 x 2300 x 1750 mm and a weight of approximately 2500 kg, offers high stability and smooth operation, which has a positive effect on cutting quality and service life. The scope of delivery also includes approximately 8 spare saw blades, which enable immediate and uninterrupted use of the machine. Overall, this is a reliable and versatile bandsaw machine that combines precision, performance, and efficiency in industrial production. Kdjdszk Hd Uspfx Ah Aop --- Optional accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to optimize material flow and provide comfortable handling of the cut material. --- You are welcome to inspect the machine in our workshop while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Upon request, we offer delivery and commissioning of the machine as part of a comprehensive, hassle-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 280 mm, cutting width (max.): 280 mm, total height: 1,590 mm, total length: 2,680 mm, total width: 2,540 mm, overall weight: 1,750 kg, Equipment: chip conveyor, rotational speed infinitely variable, The KASTO SBA 280 AU is a powerful horizontal bandsaw automation system for the precise and economical cutting of solid and profile materials in general mechanical engineering as well as in series and single-item production. With a cutting diameter of up to 280 mm and a cutting range of 280 x 280 mm at 90°, the machine is particularly suitable for the reliable cutting of various materials and cross-sections. The robust design in combination with a continuously adjustable cutting speed of 17 – 90 m/min enables optimal adaptation to the respective material and ensures clean, dimensionally accurate cutting results. The feed unit allows feed lengths of 600 mm (single) or up to 5400 mm (multiple) – for an efficient, largely automated material flow with minimal scrap length from 30 mm. The core of the system is the proven KASTO Compact Control, which offers intuitive operation, simple programming of cutting lengths and quantities, and a high level of process reliability in automatic operation. The integrated coolant system ensures optimal cutting conditions and a long service life of the saw blade, while the chip conveyor ensures clean and trouble-free chip removal. Kodpfezk Hacex Ah Aodp With a compact footprint of approximately 2.68 x 2.54 x 1.59 m and a machine weight of approximately 1.75 t, the SBA 280 AU offers high stability and smooth running, which has a positive effect on cutting quality and service life. Overall, it is a reliable and versatile bandsaw automation system that combines precision, performance and economy in industrial production. --- Optional Accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to match the machine – for an optimized material flow and comfortable handling of the cut material. --- You are welcome to inspect the machine in our factory while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Condition: used, Year of construction: 1998, machine/vehicle number: MR003421, Used panel saw, manufacturer Putsch. Machine price ex Staphorst, on-site delivery negotiable. Technical specifications: - Machine number: 9814C393 Kjdsyz Iivspfx Ah Aodp

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17A007162300500, functionality: fully functional, input voltage: 400 V, Griggio SNAC 640 bandsaw from 2017. The machine has a 400V connection and is in good condition. Kjdjzkkpzopfx Ah Aedp

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Kedpfx Aey R Tqksh Asdp Location: Nattheim.

Condition: used, Make: MÖSSNER record Type: SSF /950 Design: 950mm Kodpfevtyv Hsx Ah Ajdp Table size: 800x750mm

Condition: good (used), Wheel diameter: 400mm table size: 2000x1000mm Kedpfsm Uc Sysx Ah Aodp Execution: 1100mm max. cutting core: 300 mm

Condition: good (used), Table size: 900x900mm Kdodslgvk Ajpfx Ah Aep Overhang: 630mm

Condition: good (used), Manufactured by: Stanko Tilt table Table size: 560 x 560 mm Design: 400 mm Maximum cutting height: 240 mm Kdjdpfxjv S Ukvo Ah Asp Belt length: 3150 mm Adjustable speed

Condition: good (used), Table size: 610 x 610 mm Height: 780 mm Kdjdpfx Ahoixtu Ns Aop Adjustable table!

Condition: used, Year of construction: 2013, Second-hand machine Year of manufacture: 2013 Features and technical specifications: - Machine has been fully overhauled: - new Glue Jet 301 adhesive system (top layer 1 mm) - all units inspected - all cutters sharpened - all blades replaced - Feed speed: 10–18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8–60 mm - Edge thickness: 0.4–8 mm - Electrical system for stepless feed: 400 V / 50 Hz, 2.2 kW - motorised pressure bridge adjustment - automatic chain lubrication Kedpfxozlbpzs Ah Ajdp - PPC 315 control unit with 15-inch touchscreen - ECO MODE energy-saving mode - Feed guide 1350 mm, motorised adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for joining the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise rotation for joint milling unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for joint milling unit - Fully automatic edge feeder 1901 - Glu Jet GJ301 automatic adhesive application station: - 2.3 kW