Used Studer S 25 for sale (75,495)

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) Dodpfx Adjz Ab A Aorecn - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: refurbished (used), Year of construction: 2025, IMMEDIATELY AVAILABLE Studer S20-2 – Mechanically Reconditioned Grinding length: 400 mm Center height: 100 mm Table swivel: 30° Bore diameter: 127 mm Grinding wheel dimensions: 350 x 32 mm Tool holder taper WSS: MK4 (stationary and rotating center) Tool holder taper RST: MK2 Tailstock quill travel: 20 mm Workpiece weight: 20 kg Tailstock with manual runout compensation Further optional features: - Glass scale in X and Z axes Dcedpfx Ajfg Tbredren - Internal grinding device - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 2455698, power: 41 kW (55.74 HP), load capacity: 750 kg, mast type: telescopic, lifting height: 26,000 mm, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 18,000 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: diesel, color: red, Technical data Year of manufacture: 2010 Engine: Diesel Working height: 28.00 m Platform height: 26.00 m Platform extension: 2.13 m Platform dimensions (L x W): 5.48 m x 2.44 m Overall dimensions (L x W x H): 5.96 m x 2.50 m x 3.20 m Load capacity: 750 kg Controls: Proportional Dcedpfx Aoyqzrzodron Climbing ability: 40% Weight: 18,000 kg Travel speed: 0.7 - 4.0 km/h All-wheel drive General signs of use, fully functional

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Superstructure: Salt spreader, approx. 3.5 m³ and 1,250 liters. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dcsdpfx Adez Iyx Rorjn

Condition: used, Year of construction: 1982, Technical details: bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm spindle taper MT: MK3 spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm table clamping surface:: 330 x 300 mm table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg Dcedpfx Aou Idkbedrjn dimension machine xH: 0,7 x 0,45 x 1,87 m Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice *

Condition: excellent (used), Year of construction: 2012, S016966 PROD. KAESER TYPE SK25 S/N 1181 YEAR 2012 Dcedsz Dupcopfx Adrjn POWER (kW) 15 OUTPUT (m3/min) 2.45 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 36239/64314 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 3/4

Condition: refurbished (used), Year of construction: 2025, Studer S30 Maximum distance between centers: 125 mm Distance between centers: 650 mm Workpiece weight: 80 kg Additional optional features: - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive incl. PLC Pro (cycle-controlled) - "Workpiece memory" PLC Pro for 10/15/30/50 workpieces - Glass scale in X and Z axes - Swivelable internal grinding device - Motor spindle for internal grinding device - Frequency converter for external grinding spindle - Frequency converter for internal grinding spindle - In-process grinding sensor - Guard for external grinding spindle Dcjdpsd Hdxwofx Adron - Safety door - manually operated - Grinding wheel flange - LED spotlight with flexible arm - Matching coolant system

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: Dcodjy El U Dopfx Adron – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,050 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,400 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, Equipment: 3rd hydraulic function, Load capacity: 2,500 kg Linde H 25 Diesel Mast type: Triplex with full free lift Year of manufacture: 2008 Operating hours: 5,050 Lift height approx. 4,700 mm Overall height approx. 2,200 mm 3rd valve Sideshift Dodpjz Hfryjfx Adrecn Heater Gross: €14,875 / Net: €12,500 Looking for a different forklift or stacker? LPG, electric, or diesel? Contact us and we will find the right vehicle for you. Subject to errors and prior sale. Sale to professionals only, no warranty.

Condition: used, Year of construction: 2014, gearing type: other, first registration: 01/2014, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Superstructure: Salt spreader, approx. 3.5 m³ and 1,250 liters. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dcsdoz Iyyhspfx Adrjn

Condition: ready for operation (used), Year of construction: 2011, operating hours: 46,000 h, clamping force: 245 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2011. This SUMITOMO SHI DEMAG Systec 25/320-80 features a clamping force of 25 t and a screw diameter of 18 mm. It offers a maximum metering volume of 23 cm³ and a mold height range of 130 mm to 480 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 25/320-80 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2868 bar- Max. Metering Volume: 23 cm³- Mold Height: 480 mm- Min. Mold Height: 130 mm- Distance Between Tie Bars: 320 x 320 mm- Centering Hole Diameter (Ejector/Nozzle): 110 mm- Maintenance Group: 1- Core Pull: 1- Operating Hours: 46,000 hrs (Pump)- Pump Drive Power: 17.5 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Cooling Circuit: Open, separated water connection for mold and machine cooling- Cylinder / Screw: Bimetallic cylinder, wear-resistant 18 mm screw with 3-piece non-return valve- Nozzle: Open nozzle M24x1.5, flat radius, 2.0 mm bore- Integrated Sockets: 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A Dcedpfx Ajz Erxksdren

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm Dsdpfx Asu Ngkyedrocn table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Dodpfx Adjxk T Eferjcn Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: used, Year of construction: 2002, Studer S60 CNC – Very well-maintained machine Operated solely with oil Year of manufacture: 2002 Center height: 225 mm Dcsdpfx Adoh Aykijrjn Control system: Fanuc 16T

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, input voltage: 110,000 V, nominal power (apparent): 20,000 kVA, secondary voltage: 20,000 V, For sale is a high-performance power transformer from the renowned manufacturer ALSTOM. This unit is ideal for industrial power grids or as a redundancy transformer for grid operators. Key technical features: - Power rating: 20 MVA (20,000 kVA), upgradable to 25 MVA - Voltage: 110,000 V (HV) / 20,000 V (MV) / 10,000 V (LV) - Year of manufacture: 2001 (Type TC1743G) - Cooling: ONAN (option to upgrade to ONAF) - Tap changer: Equipped with high-quality MR on-load tap changer with 19 steps Weight specifications: - Total operational weight (incl. oil): 40.8 t - Dry weight (without oil): approx. 29.3 t Optional accessories such as switchgear and instrument transformers are available upon request. Condition & Service Options: The transformer is in operational condition. To ensure maximum operational safety, we offer the following options: ✅ Complete overhaul: Full technical refurbishment on request ✅ New paintwork: Professional repainting available Dedeyzl T Sspfx Adrjcn Location: Cloppenburg Price: Negotiable / open to offers For inquiries or detailed documentation (test protocols, dimension sheets), please contact us. An inspection can be arranged by appointment.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Dsdpfx Aoyf Ha Hsdrecn Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: ready for operation (used), * Type: Grizzly * Surface: 2500 x 900 mm - 1 Deck * Screen opening: 60 mm. Dodpfx Aeywnggjdrscn * Driving : 7,5 kW e-motor. * Incl.: springs.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2451438, power: 16 kW (21.75 HP), load capacity: 450 kg, mast type: telescopic, lifting height: 22,500 mm, platform length: 3,980 mm, platform width: 1,190 mm, overall weight: 10,290 kg, transport length: 4,490 mm, transport width: 1,200 mm, transport height: 2,910 mm, fuel type: electric, color: red, Equipment: UVV, Technical Data Year of manufacture: 2019 Engine: Electric Working height: 22.50 m Platform height: 20.50 m Platform dimensions (L x W): 3.98 m x 1.19 m Platform extension: 1.50 m Lifting capacity: 450 kg Overall dimensions (L x W x H): 4.49 m x 1.20 m x 3.71 m Steering angle: 90° Turning radius: 3.98 m Total weight: 10,290 kg Max. gradeability: 25% Engine power: 16 kW, 48 V Fully functional, with general signs of use Dcjdpfxeyqy Die Adren

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty Dsdpfx Adsy Rnqforocn + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: excellent (used), Year of construction: 2009, Metal cutting Tooling SMW AUTOBLOK - W-325-S MACH-ID 5119 Make: SMW AUTOBLOK Type: W-325-S Year: 2009 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dsdpfx Adszc Ivqsrecn

Condition: used, empty load weight: 8,270 kg, maximum load weight: 27,730 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, Dsdpey Apkwsfx Adrjcn ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, first registration: 03/2019, tire size: 435/50R19.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dcodpfx Aey Apk Dsdrjn

Condition: new, SCHUNK DPG 100 parallel gripper, serial number: 370253 + accompanying documents DPG 100/1 and DPG 100/1 S, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Dedpfszd I Eyox Adrecn

Condition: used, Max saw blade diameter: 400 mm Min saw blade diameter: 250 mm Saw blade spindle diameter: 30 mm Scoring blade diameter: 125 mm Scoring blade spindle diameter: 20 mm Scoring blade with separate motor Electric saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Table length: Table lock Work table: Table extensions Dust extraction port diameter: Dust hood: 3000 mm long fence with 2 stops Guard Safety switch Power supply: 400 V Motor power: 4.5 kW Dedpfxezh Hcxs Adrjcn Saw blade speed: 5000/4200/3200 rpm Manufacturer: CASOLIN Overall dimensions: Length: 3420 mm Width: 3780 mm Height: 1600 mm

Condition: used, empty load weight: 5,340 kg, maximum load weight: 30,660 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2014, loading space length: 7,300 mm, loading space width: 2,340 mm, loading space height: 1,500 mm, loading space volume: 25 m³, total length: 8,800 mm, total width: 2,550 mm, total height: 3,300 mm, suspension: air, tire size: 385 / 65 R 22,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, work lights, aluminum rims, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, walkway, folding U-protection, front support, chute Dcodsvhigkspfx Adrsn Body: Thermo box body approx. 25 cbm. Drum brakes ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .