Used Swz Broach Tool for sale (37,595)

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 34832025_33, Tool cabinet for press brake -ausziehbare drawers, allowing the two-sided access to the tools -beliebige Hoehenverstellung the Einlegeboeden -robust steel construction, powder coated in any RAL palette -Lateral Gabelfuehrungsschienen for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 Pieces - Dimensions of drawer: - Total height 1200mm / 850mm Overall width / total depth 1050mm - Dimensions of the drawers in a drawer: Lhodjy A Nupspfx Akyef - Fachhhoehe set at 210mm (is varriabel) - Trade Overall Height 990mm usable ohnen Zwischenboeden - Trade width 130mm available - Trade depth usable 980mm - Number of Zwischenboeden: 3 pieces

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2026_3, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B Lhjdpfxoy A Nrzj Akyof L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2026_2, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) Ljdsy A Nrnepfx Akyshf -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 3483520_29, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled Lhsdpoy A Np Tsfx Akyof - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835_20_29, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available Ledpfx Akjy A Nptoyohf - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2027_2, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm Lhodpfx Akoy A Npmsyof - Number of shelves: 5 pieces / completely continuous

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 9 drawers – large format, approximately 117 x 104 cm inside the drawer – each drawer has its own bearing. Made in Germany Lodpfx Ajy Ehkbokyshf

Condition: used, TECHNICAL DETAILS - Tool length : 400 [mm] Lodpfx Akouhb Stsyehf - Max. tool diameter : 400 [mm] - Supply voltage : 230 [V] - ISO 50 taper spindle

Condition: used, Year of construction: 1992, Universal machine - Tool milling machine and lathe. Ledpfx Akey D Rdheyohf Table 290 x 900 mm Table loading 80 kg Spindle revolutions ... 56 - 4500 rpm Lathe - working diameter 200 mm Lathe - working length 800 mm Machine weight 1700 kg

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, TOOL PRESETTING DEVICE Ljdpfx Aey A Stbokyehf SPERONI FUTURA STP 44 Year of manufacture: 12/2017 Travel range Z: 400 mm Travel range X: 426 mm Measuring range: 400 mm Max. tool weight: 200 kg AVAILABLE TOOL HOLDERS SK 30 SK 40 HSK 63

Condition: used, used, in good condition cleaned, function-tested Brand: Hofmann Lhodpfx Ajy Ay Dhjkyof Table size: 410 x 260 mm Travel: 800 mm Stop is rotatable Workpiece clamp manual, 1 piece Original price approx. 2,350 EUR Space requirement approx. 1000 x 500 x 300 mm Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in current condition, as inspected, without warranty and guarantee

Condition: ready for operation (used), A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible. Ljdey Anubjpfx Akyshf

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Lhjdpeua Tbwefx Akyof

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine Ljdpfey Aygijx Akyehf • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, circle diameter 160 mm material Stahl HSS Lhsdpfx Akey Apgfoyef Bore diameter 30 mm width 26 mm Lot Mini tine cutter Leitz some tines 4 of 7 cutters are slightly damaged.

Condition: excellent (used), Number of knives Z2 V2 Lhjdpfx Aoy Apf Uekyof width 17 mm circle diameter 160 mm material Stahl WP Bore diameter 40 mm Jointing rebate cutter Weinig type 530 160 for use on the planing spindle of Weinig planing machines.

Condition: excellent (used), For sale: the grinding machine shown in the photos, manufactured by the British company Eliot, model 618. The condition of the machine is rated as very good – almost like new. It has been used very rarely, which is the reason for the sale. Net price, VAT 23% Ledey A Tnmjpfx Akyohf AEG motor 1.5 kW Maximum spindle-to-table height: 400 mm Rapid traverse in Z axis Table size: 150x450 mm

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping screw set with storage box Lsdeu Npgwspfx Akyjhf -Type: various designs, see photos -Thread: M20 -Price/Fee: complete -Box dimensions: 380/315/H60 mm Total weight: 11.7 kg

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm Ljdpfxsyzh Sds Akyshf OZU-318 100x80° R=20 H=100 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 160,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Lhodpfoyzzb Sex Akysf Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information Lsdpfx Aksyzz R Teyjhf * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: ready for operation (used), tool grinding machine working perfectly Lhsdpfx Aeyw N D Tskyof

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: VYDONA WOOD EU78-92 VYDONA Wood-Aluminium 92mm Hole 50mm. All complete. Very good condition. Ledpfxey D E S Hj Akyjhf Available as a set. Possible to buy also separately.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2201-5046, Good condition with various tool holders. SK40 - S20 Heidenhain active control Ljdoy Al Tnjpfx Akyjhf Automatic feeds on all axes. 4th axis controlled.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2201-5046, Good condition with various tool holders. Lhsdpfx Asy Al H Iekyef SK40 - S20 Heidenhain active control Automatic feeds on all axes.