Used Tamar Light Microscope Id071 Plmis for sale (22,694)

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t Nwedpfxeu Nigwj Ai Tsn dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. The machine is mounted on a dedicated, blue workshop base. Technical data: Nsdpfx Ajz Sutxsi Tewn Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Compliance mark: CE Design and equipment: The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). The steel base is equipped with a lower shelf made of perforated sheet metal.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension Nwjdpfx Ajzlkgcji Ten 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: excellent (used), Wild Heerbrugg M3 – professional stereo microscope I am offering a high-quality stereo microscope from the renowned Swiss company Wild Heerbrugg. This device is suitable for use in laboratories, quality control, electronics, jewelry making, watchmaking, and precision work. Nodsz Sm E Iepfx Ai Town Technical specifications: • Manufacturer: Wild Heerbrugg • Model: M3 • Country of manufacture: Switzerland • Binocular head • Focus adjustment • Sturdy laboratory stand • High-quality optics Condition: Used item. Visually in good condition, with normal signs of use. Sold exactly as shown in the photos.

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 1,030 kg, noise level: 59 dB, type of input current: AC, Kubota Z482 engine, 2-cylinder, Liquid-cooled, 5 kVA power output 1,500 rpm 230 Volt / 50 Hz socket Luminous flux: 4 x 320 Watt G4 LED 188,160 lumen output, illumination area: 4,500 m2 Maximum height: 8.50 meters Electro-hydraulic mast lifting system Nwsdpfe Aay Hxex Ai Ten TVD - Braked road chassis with car and truck hitch AMK – Amoss kit DSK – Dusk sensor and timer ISM - Insulation monitoring Certified wind resistance: 110 km/h Average sound pressure level: 59 dB(A) at 7 meters Weight: 1030 kg without operating fluids Fuel tank capacity: 100 liters

Condition: used, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Support for product development, design, and quality control Detection of potential problems during the development phase Quality and safety control Endurance testing stand Njdpfsh Rvh Sjx Ai Tjwn Temperature control Mobile on rollers Forklift access pockets 400 VAC, 3-phase, 50 AMP IR: 10,000 Amp Year of manufacture: 2012 Weight: 1400 kg Dimensions (H x W x D): 2900 x 1700 x 1900 mm You can find more testing equipment – new and used – in our shop! International shipping costs available upon request!

Condition: used, Spotlight drilling machine, drilling fixture For drilling holes for lighting fixtures, cable passage holes, and spotlight holes in suspended cabinets, display cases, and carcasses. Nodpfx Aiovdc T Ne Tjwn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Lightweight roller conveyors, 440mm, 400mm, straight, 1m, steel rollers, 100mm · For transporting individual items by gravity (incline). Inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods. · The bottom of the conveyed goods may have longitudinal supports or continuous ring strips, provided that they rest on the rollers. · Since the support rollers protrude, oversized conveyed goods can also be transported. · Different intermediate lengths are available on request. · The conveyed goods should rest on at least 3 support rollers. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube on request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. · ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of 1000 mm length – 975 mm length, instead of 2000 mm length – 1950 mm length. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical characteristics: overall width: 440mm Conveyor width: 400 mm Pitch (axle distance): 100 mm Overall width: 440 mm Nwodpfxo Abvd Ao Ai Tjn Size: Straight, 1 m Design: with steel rollers, galvanized.

Condition: new, Light roller conveyors, 440mm, 400mm, straight, 2m, steel rollers, 100mm · For transporting individual items by gravity (inclination), with an inclination of approximately 2 - 5%, depending on the nature and weight of the conveyed goods. · The bottom of the conveyed goods may have longitudinal supports or continuous circular rails, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed goods can also be transported. · Different intermediate lengths are available at any time. · The conveyed goods should rest on at least 3 support rollers. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). · Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available on request. · Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections, depending on the conveyor width. · ¹ Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional available axle distances: 62.5 mm, 125 mm, 150 mm and 200 mm. Njdpfx Ais Abvd Nj Tjwn · Other technical specifications: overall width: 440mm Conveyor width: 400 mm Size: straight, 2 m Overall width: 440 mm Design: with steel rollers, galvanized Spacing (axle distance): 100 mm

Condition: new, Light roller conveyors, 340mm, 300mm, straight, 1m, steel rollers, 75¹mm * For transporting individual items by gravity (incline). Inclination of approximately 2 - 5%, depending on the nature and weight of the conveyed goods. * The bottom of the conveyed goods can have longitudinal bars or circumferential ring strips, provided that these rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths can be supplied at any time. Nwedpfx Aij Abu Ugs Tsn * The conveyed goods should rest on at least 3 support rollers. * This determines the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). * Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe available upon request. * Curves: Inner radius 800 mm, support rollers continuous or divided into several sections depending on the conveyor width. * ¹ Note: with a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm – a length of 975 mm, instead of a length of 2000 mm – a length of 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. * Other technical specifications: Overall width: 340mm Pitch (axle distance): 75¹ mm Overall width: 340 mm Design: with steel rollers, galvanized Conveyor width: 300 mm Size: Straight, 1 m

Condition: new, Light roller conveyors, 340 mm, 300 mm, straight, 2 m, steel rollers, 75¹ mm * For transporting individual items by gravity (slope). Inclination approximately 2 - 5 %, depending on the nature and weight of the conveyed goods. * The base of the conveyed goods may have longitudinal supports or circumferential ring strips, provided that they rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths are available on request. * The conveyed goods should rest on at least 3 support rollers. * This determines the required pitch = center distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. * Curves: Internal radius 800 mm. Support rollers are continuous or divided into several sections, depending on the conveyor width. Nwsdpj Abu Umsfx Ai Ton * ¹ Note: With a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional center distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 340 mm Overall width: 340 mm Pitch (center distance): 75¹ mm Size: Straight, 2 m Conveyor width: 300 mm Design: with steel rollers, galvanized.

Condition: new, Lightweight roller conveyors, 340mm, 300mm, 45-degree curve, center distance 75mm. * For transporting individual items by gravity (incline), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed material. * The base of the conveyed material can have longitudinal stiffeners or a continuous circular edge, provided that these rest on the rollers. * Because the support rollers protrude, oversized conveyed material can also be transported. Nwodj Abvawjpfx Ai Ton * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This results in the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available on request. * Curves: inner radius 800 mm, support rollers continuous or divided into multiple sections, depending on the conveyor width. * ¹Note: with a spacing of 75 mm, the following lengths are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. * Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: overall width: 340mm Spacing (axle distance): 75¹ mm Design: with plastic rollers Size: 45° curve Conveyor width: 300 mm Overall width: 340 mm

Condition: new, Lightweight roller conveyors, 340mm, 300mm, straight, 2m, steel rollers, 100mm * For transporting individual items by gravity (incline), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed material. * The base of the conveyed material may have longitudinal supports or a continuous circular rim, provided it rests on the rollers. * Since the support rollers protrude, oversized conveyed material can also be transported. Nwodpfx Aio Abva Re Tsn * Alternative intermediate lengths are available upon request. * The conveyed material should rest on at least 3 support rollers. * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available upon request. * Curves: Internal radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. * ¹ Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm – a length of 975 mm, instead of a length of 2000 mm – a length of 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 340mm Size: Straight, 2 m Spacing (axle distance): 100 mm Design: with steel rollers, galvanized Conveyor width: 300 mm Overall width: 340 mm

Condition: new, Lightweight roller conveyors, 440 mm, 400 mm, straight, 2 m, steel rollers, 75¹ mm · For transporting individual items by gravity (slope). Inclination approx. 2 - 5 %, depending on the properties and weight of the conveyed material. · The base of the conveyed material may have longitudinal supports or circumferential ring strips, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Different intermediate lengths are available on request. · The conveyed material should rest on at least 3 support rollers. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic pipe, Ø 50 x 2.8 mm, ball-bearing mounted; steel pipe, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel pipe on request. · Curves: inner radius 800 mm. Support rollers, depending on the conveyor width, are either continuous or divided into multiple sections. · ¹ Note: with a spacing of 75 mm, the following are supplied: instead of a length of 1000 mm - a length of 975 mm, instead of a length of 2000 mm - a length of 1950 mm. Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. Nwjdpfj Abvcfsx Ai Tjn · Other technical features: overall width: 440 mm. Size: Straight, 2 m Spacing (axle distance): 75¹ mm Conveyor width: 400 mm Design: with steel rollers, galvanized Overall width: 440 mm

Condition: new, Light roller conveyors, 440 mm, 400 mm, straight, 3 m, steel rollers, 75¹ mm * For transporting individual items by gravity (incline), with an inclination of approximately 2 - 5 %, depending on the nature and weight of the conveyed material. * The bottom of the conveyed material may have longitudinal supports or continuous circular rails, provided they rest on the rollers. * Because the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. * This results in the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe on request. * Curves: Internal radius 800 mm, support rollers continuous or divided into multiple sections, depending on the track width. * ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: overall width: 440 mm Size: Straight, 3 m Nwedpfo Abvclsx Ai Ton Pitch (axle distance): 75¹ mm Overall width: 440 mm Track width: 400 mm Design: with steel rollers, galvanized

Condition: new, Light roller conveyors, 640 mm, 600 mm, 45-degree curve, steel rollers, 75 mm * For transporting individual items by gravity (inclination). Inclination approximately 2 - 5%, depending on the nature and weight of the conveyed goods. * The base of the conveyed goods may have longitudinal supports or continuous circular rails, provided they rest on the rollers. * As the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths are available at any time. * The conveyed goods should rest on at least 3 support rollers. Nedpfx Ae Abvkpji Tswn * This results in the required pitch = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic pipe Ø 50 x 2.8 mm, ball-bearing mounted, steel pipe, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel pipe available on request. * Curves: Inner radius 800 mm, support rollers continuous or divided into multiple sections, depending on the conveyor width. * ¹ Note: with a pitch of 75 mm, the following are supplied: instead of a length of 1000 mm - length 975, instead of a length of 2000 mm - length 1950. Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 640 mm Pitch (axle distance): 75 mm Design: with steel rollers, galvanized Conveyor width: 600 mm Size: 45° curve Overall width: 640 mm

Condition: new, Lightweight roller conveyors, 640 mm, 600 mm, straight, 1 m, curved, radius 75¹ mm · For transporting individual items using gravity (slope), inclination approx. 2-5 %, depending on the nature and weight of the conveyed goods · The base of the conveyed goods can have longitudinal supports or continuous circular strips, provided they rest on the rollers · As the support rollers protrude, oversized conveyed goods can also be transported · Different intermediate lengths are available on request · The conveyed goods should rest on at least 3 support rollers · This results in the required spacing = axle distance · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request) · Support rollers: plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube available on request · Curves: inner radius 800 mm, support rollers, depending on the conveyor width, either continuous or divided into multiple sections · ¹Note: with a spacing of 75 mm, the following dimensions will be delivered: instead of a length of 1000 mm, a length of 975 mm will be delivered; instead of a length of 2000 mm, a length of 1950 mm will be delivered Nwsdpfxe Abvkvs Ai Ton · Additional available axle distances: 62.5 mm, 125 mm, 150 mm and 200 mm · Other technical specifications: overall width: 640 mm Size: Straight, 1 m Design: with plastic rollers Spacing (axle distance): 75¹ mm Conveyor width: 600 mm Overall width: 640 mm

Condition: new, Lightweight roller conveyors, 540 mm, 500 mm, straight, 2 m, curved roller, 75¹ mm * For transporting individual items by gravity (inclined), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed goods. * The bottom of the conveyed goods may have longitudinal supports or continuous circular rails, provided these rest on the rollers. * Since the support rollers protrude, oversized conveyed goods can also be transported. * Different intermediate lengths are available on request. * The conveyed goods should rest on at least 3 support rollers. * This results in the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. * Curves: Inner radius 800 mm, support rollers continuous or divided into multiple sections depending on the conveyor width. * ¹Note: with a spacing of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied, instead of a length of 2000 mm, a length of 1950 mm is supplied. * Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical features: Overall width: 540 mm. Spacing (axle distance): 75¹ mm Overall width: 540 mm Design: with plastic rollers Conveyor width: 500 mm Size: Straight, 2 m Nwedpfx Ao Abvhhsi Tsn

Condition: new, Lightweight roller conveyors, 540 mm, 500 mm, straight, 3 m, curved roller, 75¹ mm · For transporting individual items by gravity (slope), inclination approx. 2-5%, depending on the nature and weight of the conveyed material. · The bottom of the conveyed material can have longitudinal supports or continuous circular rails, provided they rest on the rollers. · Since the support rollers protrude, oversized conveyed material can also be transported. · Different intermediate lengths can be supplied at any time. · The conveyed material should rest on at least 3 support rollers. · This determines the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: plastic tube Ø 50 x 2.8 mm, ball-bearing mounted, steel tube, galvanized Ø 50 x 1.5 mm, ball-bearing mounted, aluminum or stainless steel tube on request. · Curves: inner radius 800 mm, support rollers continuously or divided into multiple sections depending on the conveyor width. · ¹Note: with a pitch of 75 mm, the following dimensions are supplied: instead of a length of 1000 mm, a length of 975 mm is supplied; instead of a length of 2000 mm, a length of 1950 mm is supplied. · Additional axle distances available: 62.5 mm, 125 mm, 150 mm and 200 mm. · Other technical specifications: overall width: 540 mm. Design: with plastic rollers Overall width: 540 mm Conveyor width: 500 mm Pitch (axle distance): 75¹ mm Nwedps Abvhnjfx Ai Ton Size: Straight, 3 m.

Condition: new, Lightweight roller conveyors, 540 mm, 500 mm, straight, 1 m, curved roller, 100 mm · For transporting individual items by gravity (incline). Slope approximately 2-5%, depending on the nature and weight of the conveyed material. · The base of the conveyed material may have longitudinal supports or continuous circular profiles, provided they rest on the rollers. Njdps Abviljfx Ai Town · Since the support rollers protrude, oversized conveyed material can also be transported. · Different intermediate lengths can be supplied at any time. · The conveyed material should rest on at least 3 support rollers. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile on request). · Support rollers: Plastic pipe, Ø 50 x 2.8 mm, ball-bearing mounted; steel pipe, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel pipe on request. · Curves: Inner radius 800 mm, support rollers continuously or divided into multiple sections, depending on the conveyor width. · ¹Note: with a pitch of 75 mm, the following will be supplied: instead of a length of 1000 mm, a length of 975 mm; instead of a length of 2000 mm, a length of 1950 mm. · Additional available axle distances: 62.5 mm, 125 mm, 150 mm, and 200 mm. · Other technical characteristics: overall width: 540 mm. Conveyor width: 500 mm Design: with plastic rollers Size: straight, 1 m Pitch (axle distance): 100 mm Overall width: 540 mm

Condition: new, Light roller conveyors, total width 640 mm, 45-degree curve with steel rollers, galvanized, 75 mm * For transporting individual goods by gravity (inclination), with an inclination of approximately 2-5%, depending on the nature and weight of the conveyed goods * The conveyed goods must have a smooth and stable base * The smallest width of the conveyed goods must not be less than 200 mm * The conveyed goods should rest on at least 3 roller axles * This determines the required spacing = axle distance * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request) * Rollers: ball-bearing mounted, galvanized steel rollers Ø 48 mm, or ball-bearing mounted plastic rollers, ball-bearing mounted plastic rollers with stainless steel balls available on request * Curves: inner radius 800 mm (different radii available) * ¹Note: with a spacing of 75 mm, the delivered length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm Nwedpfxs Abvxme Ai Ten * Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm * Other technical specifications: size: 45° curve * Total width: 640 mm * Design: with steel rollers, galvanized Size: 45° curve Track width: 600 mm Spacing (axle distance): 75 mm Design: with steel rollers, galvanized Total width: 640 mm

Condition: new, Light roller conveyors, 440mm, 400mm, straight, 2m, curve radius 100mm * For transporting individual items by gravity (inclination), with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material. * The bottom of the conveyed material may have longitudinal supports or circumferential ring profiles, provided they rest on the rollers. * As the support rollers protrude, oversized conveyed material can also be transported. * Different intermediate lengths are available on request. * The conveyed material should rest on at least 3 support rollers. Njdpfx Ae Abvfmji Tjwn * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available on request). * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available on request. * Curves: Internal radius 800 mm, support rollers divided continuously or in multiple sections, depending on the conveyor width. * ¹Note: with a spacing of 75 mm, the following dimensions will be supplied: instead of a length of 1000 mm, a length of 975 mm will be supplied; instead of a length of 2000 mm, a length of 1950 mm will be supplied. * Additional axle distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Overall width: 440mm Size: Straight, 2 m Spacing (axle distance): 100 mm Design: With plastic rollers Overall width: 440 mm Conveyor width: 400 mm

Condition: new, Light roller conveyors, 540mm, 500mm, 45-degree curve, steel rollers, 75¹mm * For transporting individual items by gravity (slope), inclination approximately 2 - 5%, depending on the nature and weight of the conveyed material * The base of the conveyed material may have longitudinal supports or continuous circular rails, provided they rest on the rollers * Since the support rollers protrude, oversized conveyed material can also be transported * Different intermediate lengths are available upon request * The conveyed material should rest on at least 3 support rollers * This results in the required pitch = center distance * Frame: U-profile 20/70/20 mm, galvanized (aluminum or stainless steel profile available upon request) * Support rollers: Plastic tube, Ø 50 x 2.8 mm, ball-bearing mounted; steel tube, galvanized, Ø 50 x 1.5 mm, ball-bearing mounted; aluminum or stainless steel tube available upon request * Curves: Internal radius 800 mm, support rollers continuous or divided into multiple sections, depending on the conveyor width * ¹ Note: with a pitch of 75 mm, the following lengths are supplied: instead of 1000 mm - 975 mm, instead of 2000 mm - 1950 mm. Additional center distances available: 62.5 mm, 125 mm, 150 mm, and 200 mm * Other technical specifications: Overall width: 540 mm Conveyor width: 500 mm Nwedpo Abvg Rjfx Ai Ten Design: with steel rollers, galvanized Pitch (center distance): 75¹ mm Overall width: 540 mm Size: 45° curve

Condition: new, Light roller conveyors, total width 640 mm, straight, 3 m, with steel rollers, galvanized, 75 mm. · For transporting individual items by gravity (slope), inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required pitch = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. Nwodpfxs Abvvle Ai Ten · Other technical specifications: Size: Straight, 3 m. · Total width: 640 mm. · Design: with steel rollers, galvanized. Design: with steel rollers, galvanized Size: Straight, 3 m Conveyor width: 600 mm Pitch (axle distance): 75 mm Total width: 640 mm

Condition: new, Light roller conveyors, total width 640 mm, straight, 2 m, with steel rollers, galvanized, 100 mm · For transporting individual items by gravity (downhill), inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods · The conveyed goods must have a smooth and stable base · The smallest width of the conveyed goods must not be less than 200 mm · The conveyed goods should rest on at least 3 roller axles · This results in the required pitch = axle spacing · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request) · Rollers: ball-bearing, galvanized steel rollers, Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request · Curves: inner radius 800 mm (different radii available) · ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm · Additional available axle spacings: 50 mm, 125 mm, 150 mm and 200 mm · Other technical specifications: Size: Straight, 2 m · Total width: 640 mm · Design: with steel rollers, galvanized Design: with steel rollers, galvanized Pitch (axle spacing): 100 mm Total width: 640 mm Size: Straight, 2 m Conveyor width: 600 mm Nodpfxj Abvvxs Ai Tswn