Used Taski Swingobot 2000 for sale (7,421)

Condition: new, PRICE: 2000 EUR Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Lrjdpfox Dcdqox Akyon Voltage: 220V / 50Hz Power: 2.2kW

Condition: like new (used), PRICE: 2000 EUR Meat mincer grinder Completely made of stainless steel Lsdpfx Akjxwfppoyorn Dimensions: 415x705x930mm Electric power:1.8 kW Voltage: 220V/50Hz Capacity: 750 kg/h

Condition: new, All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Lodounal Tspfx Akyorn Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

Condition: like new (used), Thermoforming machine Lredpfx Aksxtp I Ioyen Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Ledpfouu Rx Rjx Akyjrn Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

Condition: like new (used), Vacuum tumbler SVT2000 Sind Capacity: 2000 liters Ljdpswk H Tfjfx Akyern Speed frequency: 3 to 15 turns Voltage: 380V / 50Hz Electrical Power: 6.6 kW Dimensions: 270 x 154 x 222cm

Condition: good (used), Power supply: 24 VDC Application: Lisec machines (AKL) Width: 425 mm Height: 160 mm Depth: approx. 30 mm Weight: 1402 g Condition: good, second-hand Lrsdozcvd Nepfx Akyen

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm Lsdpevanrcefx Akysrn with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: repair required (used), functionality: limited functionality, Electronic depth gauge. Lrsdjzgbgcopfx Akyon

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,385 kg, load capacity: 240 kg, controller manufacturer: KUKA, controller model: KRC2, Equipment: documentation/manual, For sale is a KUKA KR 360 L240-2 industrial robot in good, used condition. The robot comes from an industrial setting and is fully functional. Lrsdpfx Ajzdih Rjkyon Before delivery, the robot will be thoroughly tested again to ensure proper operation. This guarantees that you will receive an immediately ready-to-use and reliable solution for your automation tasks. An inspection with the robot powered on is possible at any time. Scope of delivery: - Mechanics (manipulator) - Control cabinet / controller - Operating panel (teach pendant) - Connection cable

Condition: used, Year of construction: 2011, functionality: fully functional, overall weight: 1,412 kg, load capacity: 240 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2, Equipment: documentation/manual, For sale is a KUKA KR 240-2 2000 industrial robot in good used condition. The robot comes from an industrial application and is fully functional. Before delivery, the robot will be thoroughly tested again to ensure proper operation. This guarantees that you will receive an immediately deployable and reliable solution for your automation tasks. An inspection while the robot is powered on can be arranged at any time. Lsdpfozdihdsx Akyorn Scope of delivery: - Mechanical components (manipulator) - Control cabinet / controller - Operating panel (teach pendant) - Connection cable

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Lrsdpfx Asd I A Auokysn Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Distance between Cneter 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Lrsdod I A Daopfx Akyjn Dimensions 3132 x 975 x 1270 mm

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH Lrjdpfx Akexu Dabeysn • Max. glass thickness: 70 mm • Max. glass size: Height 1900 mm, Length 3,000 mm • Open top • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Steplessly adjustable blasting speed: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air requirement at 6 bar (L/min): 1200 with 4 nozzles • Connection values: 230/400 V/50 Hz/3x16 A

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Lodszfprkopfx Akyorn Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: used, sheet width 2000 mm Lsdpfxexfwdze Akyjrn plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm Ledpfx Asd Ih Ncokyern stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN Ledjg S R Twspfx Akyorn die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: used, Year of construction: 2000, Overview This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX control cabinet mounted directly on the skid. Inline measuring technology is installed in the stainless steel piping for process monitoring, such as Brix, flow or density control. The system is suitable for beverage producers requiring precise continuous beverage preparation ahead of the filling process. Technical Data Manufacturer: H. Falterbaum FAMIX-Maschinenbau GmbH Model / Type: 20000TD Machine Type: Premix / beverage mixing and carbonation system Year of Manufacture: 2000 Capacity: approx. 22,000 l/h Application: Continuous mixing, dosing, deaeration and carbonation of beverages Product Components: Water, syrup, CO₂ and beverage components System Design: Compact stainless steel skid with integrated piping and process equipment Process Functions: Product deaeration, buffering and carbonation Construction: Stainless steel frame, tanks and piping Condition: Used, installed in industrial beverage production environment Ljdpszcgabjfx Akyjrn

Condition: used, Schuster NF2 / MLTS 2000 – Automatic machine for finishing the ends of grooves Manufacturer: Schuster Präzision Type: NF2 / MLTS 2000 Year of manufacture: 1996 Electronics modernized: 2015 Technical data: Length approx. 8,000 mm (incl. coolant system and chip conveyor) Width approx. 2,400 mm Height approx. 2,500 mm Weight approx. 13,000 kg Connection voltage: 400 V / 50 Hz Connection power: approx. 57 kW Compressed air requirement: approx. 50 m³/h Machine description: The machine offered is a highly productive special machine for the automatic machining of groove profiles or grooved workpieces. The system combines several machining and testing steps in an automated production process. Equipment according to machine card: Centering unit Lrodpfx Akezcgpvsyon End machining, insert end Circular groove milling unit 90° rotary unit Trapezoidal groove milling unit Deburring unit for grooves Saw unit End machining, shaft Deburring, insert end Testing/deburring unit Embossing unit Additional data: Coolant tank approx. 350 liters Hydraulic tank approx. 400 liters Special features: Electronics comprehensively modernized in 2015 Complete enclosure of the machining system Automated material flow Several machining stations within one machine Series production with high repeatability Integrated deburring and testing devices The machine comes from ongoing production and was designed for the machining of workpieces with circular and trapezoidal grooves. Due to its special design, it is particularly suitable for users with a corresponding manufacturing task or for adaptation to similar machining processes. The feed magazine for the raw parts has been dismantled and is not included. Inspection: An inspection under power is possible by appointment. Machine location: Bremen Loading: Dismantling/loading by the buyer. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial users and without warranty.

Condition: used, Year of construction: 1999, Suitable for (model): TRANSPORTER_____We are selling 1 used Fiedler FRS 2000 snow plow from year of manufacture 1999. Warning flags, lighting, 2-meter clearing width, swivel cylinder. Further details available on request. Location: 93095 Hagelstadt Lsdpfx Aksyq Arieyern

Condition: used, Year of construction: 2015, ©farmpartner-tec GmbH_____We are selling a used Bucher Gmeiner STA 2000 TC spreader, manufactured in 2015. Includes control panel, support legs, and a short shaft (suitable for Lindner, Multicar, etc.). 2 m³ filling capacity, 2 auger spreaders. Further details are available upon request. Location: 93095 Hagelstadt. Lodpfx Ajyq Avbjkyern

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Lrjdpfx Asy N R Iqokyon

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears Lredpjywzbdjfx Akyjn -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lsdpfx Asqqivvjkysrn Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted