Used Tecnometal 1000 for sale (8,452)

Condition: used, Year of construction: 1981, Immediately available from a workshop for disabled workers: L & Z lathe VDF Type D 480 / 1000 Year of manufacture 1981 Center height 240 mm Isdpfxozi Hqxs Ahzeid Diameter over bed 480 mm Diameter over cross slide 320 mm Spindle bore 60 mm Distance between centers 1000 mm Spindle speeds 11.2 - 2240 rpm Drive power 7.5 kW Digital display Chuck Tool holder Coolant system Weight 2.5 tons

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. Iedpfewvgbgox Ahzjid This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: used, Year of construction: 1959, Serial No. 670/848, pressing force 150 t, travel distance 30 mm, travel time 190 ms, light curtain, manufacturer SICK, type LVU 1106-0021 +++ Attention: This machine is part of an online auction! +++ Iodpszkav Dofx Ahzjid

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 • Number of tool slots: 30 Iedpfozkh I Uex Ahzoid • Chip conveyor: Complete with Chip Conveyor

Year of construction: 2007, condition: excellent (used), Description to follow! Iodpfx Aheyrtv Uszjid

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm Iiedpfx Ahsyrtwrezed grinding depth 450 mm swing diameter 660 mm

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer Isdpfxet Hwuvj Ahzeid workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1983, table diameter 1000 mm workpiece height 25 mm number of wheels 1 total power requirement kW Iodpst Hw H Sofx Ahzoid weight of the machine ca. t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1985, internal diameter 300 mm grinding depth 450 mm Iodpjyrtvzjfx Ahzeid swing diameter 660 mm

Condition: used, Technical details: Sieve diameter: 1200 mm, and alternatively 1000 mm Explosion protection: ATEX certified Equipment: - Including control cabinet Ijdpjxv Ah Hofx Ahzjid - With ultrasonic equipment - Including various sieve frames - Previously used for powder coatings

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen Iiedpszkvucofx Ahzed hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: good (used), Year of construction: 2001, functionality: fully functional, Circumferential diameter: 190 mm Turning length: 180 mm Turning diameter: max. 100 mm Z-axis: 195 mm X-axis: 125 mm Spindle bore: 43 mm Spindle bearing diameter: 80 mm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of turret positions: 10 Spindle speed range: 60 - 6000 rpm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Iiodszk D Htepfx Ahzed Operating hours: 27,267 h

Condition: excellent (used), Year of construction: 2011, Control system: Siemens Sinumerik 828D Travel ranges X/Y/Z: 1020 x 560 x 510 mm Iedjzkwb Rjpfx Ahzsid Spindle speed: 8000 min-1 Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor

Condition: good (used), Year of construction: 2010, 420 C 1000 - 290 Thermoplastic cylinder, complete, 40 mm, highly wear-resistant Selogica direct control system Hydraulic system with 2 control pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle, 40 mm Nozzle tip for open nozzle Isdpfx Ahezi A N Dszoid Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blow-out device 1 Selection unit, lateral installation, including connection Core pull, 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket distribution: 1 CEE, 1 Schuko, additional Interface for printer, serial USB CompactFlash interface for data set storage User authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Extended monitoring Equipment package: Extended movement sequences Equipment package: Production control Equipment package: Optimization / operating aids Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and parts list Without granulate hopper 50 L

Condition: good (used), Year of construction: 2014, 420 C 1000 - 290 Thermoplastic cylinder, complete, 35 mm, highly wear-resistant Standard screw coupling, coupling geometry, dual-edge Control system: Selogica direct Hydraulic system with 2 control pumps Anniversary model: GOLDEN EDITION For processing thermoplastics Open nozzle, 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blowing device 1 Selector unit, lateral installation, including connection Core pull 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket outlet: 1 CEE, 1 Schuko, in addition Interface for printer, serial USB CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Enhanced monitoring Equipment package: Enhanced traversing movements Equipment package: Production control Equipment package: Optimization / operator assistance Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and spare parts list Elastic machine mounting on vibration dampers Connection for ejector plate securing Isdpfezi A Ndsx Ahzsid Ejector quick-release coupling Control cabinet, water-cooled Socket outlet: 1 CEE, 1 Schuko Hydraulic ejector Protective device, open at the top

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Iisdpfxozc N Etj Ahzsd Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m Iiedpozc N Emjfx Ahzjd All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1995, Arburg 420C 1000-350 Year of manufacture: 1995 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core pull X 1 Dimensions: Weight: 3,700 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Iijdozc N Eaepfx Ahzod Pump/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: new, Year of construction: 2022,

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Load turner Iiedpsxwd Iqjfx Ahzod Payload capacity: 1 to 1000 kg Connection: 400V, 16A Item location: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection by appointment

Condition: used, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Iiedpjvazhdofx Ahzed

Condition: used, Year of construction: 2003, Filter area: 50 m² Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Isdpfx Ajzb N T Uehzoid Substructure with discharge screw: Briquetting press Schuko C 800 - 2 with extinguishing device Motor: 1.5 kW Weight: approx. 1200 kg Storage location: Supplier

Condition: new, Ball screw Dm 63, Iiedozi Dznopfx Ahzsd Stroke 1000mm, Pitch 20mm Mannesmann

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine with many accessories available at a low price. This machine is in very good condition and is fully functional. It was purchased as a completely overhauled unit in 2019. Price greatly reduced!!!!! Iijdswkt Euspfx Ahzod

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Stroke: 240 mm Overhang: 150 mm Isdpjzi A I Tjfx Ahzeid Table diameter: 180 mm 3 table cutouts: 16, 45 and 55 mm Space requirement: 600 x 420 x 1500 mm