Used Tool-Temp Servo Spindle Press for sale (50,447)

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Pedohh Ibdjpfx Ag Dopr Bunker system with 2X Vibroliner and 2X Vibrobunker 1X return belt 2X control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Fanuc A06B-6059-H208 #565 AC spindle servo unit SN: ES0601795, mounting points broken off, supports cracked, used, normal signs of use, 100% functional, delivery as per photos. Ppodpfox Eq Trsx Ag Dor

Condition: ready for operation (used), Fanuc A06B-6059-H218#H519 / A20B-1003-0120 / 02A AC Spindle Servo Unit SN: ES0702690A, used, in good condition, 100% fully functional, delivery as shown in the photos. Psdpfxex Eq T Ee Ag Djpr

Condition: ready for operation (used), Fanuc A06B-6059-C212 Spindle Servo Unit / Spindle Servo Unit SN: 61862 – Frame has minor damage, used, in good condition, 100% fully functional, delivery as per photos. Ppsdsx Eq Tljpfx Ag Dsr

Condition: ready for operation (used), Fanuc A06B-6059-H215 # 554 AC Spindle Servo Unit A20B-1003-0120 – Housing has minor damage, see photos, used, slight signs of wear, 100% fully functional, delivery as per photos. Ppjdpex Eq Txofx Ag Dsr

Condition: ready for operation (used), Fanuc A06B-6055-H222 spindle controller / AC Spindle Servo Unit SN: K6X-00054A, used, in good condition, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Pjdjx Eq Suopfx Ag Depr

Condition: new, Fanuc A06B-6052-H002 AC spindle servo unit, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos. Ppsdpsx Dwmysfx Ag Dor

Condition: ready for operation (used), Fanuc A06B-6055-H222 spindle control / AC Spindle Servo Unit SN: K72-00144A, used, in good condition, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Psdpfxex Dwm He Ag Dopr

Condition: excellent (used), Year of construction: 1963, functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Pedpfx Agjquqpao Dspr

Condition: good (used), Four-column Press SP 60 / 670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons - Clearance between columns: 670 mm - Side clearance between columns: 400 mm - Table size: 900x750 mm - Vertical opening (daylight): 520 mm - 6x T-slots in the upper beam - 6x T-slots in the table Dimensions: LxWxH 2x1.5x2 meters / Weight 3000 kg Ppedpfx Aex Halyeg Dsr Subject to errors and omissions.

Condition: new, Year of construction: 2025, stroke length: 300 mm, operating speed: 10 mm/s, reverse speed: 95 mm/s, controller manufacturer: ESA - DELEM - Cybelec, working width: 3,100 mm, bending force (max.): 100 t, distance between stands: 3,345 mm, control type: CNC control, number of axes: 4, actuation type: electric, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Tons (E100 Model) STANDARD FEATURES - CNC-controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes) - CNC controller (ESA S830 – 10” color touchscreen, 2D graphical display) - Automatic bending calculation and anti-collision functions - High-precision synchronized servo drive system - Belt-driven upper beam movement system, oil-free and requiring low maintenance - Spring-supported upper beam structure supporting energy recuperation - O-type frame design for minimal deformation - 300 mm stroke - 410 mm throat depth - Servo motorized backgauge system (X + R axes) - Backgauge precision: ±0.03 mm - Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm - Hardened ball screws and linear guides - Two 3-stage backgauge fingers - European type upper tool holder – quick release (Promecam type) - European type narrow lower table - Standard upper punch (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED illuminated working area - Sliding type front support arms - Double foot pedals - Emergency stop buttons - Safety equipment conforming to CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel extension to 1000 mm - Motorized crowning system - Hydraulic upper and lower tool clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light curtain - CNC-controlled sheet support arms - Laser bending line - Laser angle measurement system - Automatic angle measurement systems - Air-conditioned electrical cabinet cooling system - Additional backgauge fingers - Custom tool and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons - Bending length: 3100 mm - Distance between side frames: 3345 mm - Stroke: 300 mm - Throat depth: O-Type frame - Open height (daylight): 515 mm - Table height: 900 mm Speeds - Approach speed: 95 mm/s - Bending speed: 10 mm/s (in compliance with CE standard) - Return speed: 95 mm/s Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/s - R axis speed: 100 mm/s - Z axis speed: 600 mm/s General - Main motor power: 2 × 5.5 kW Psdpfsx Nqukjx Ag Dspr - Machine weight: ~7,500 kg - Machine dimensions (L×W×H): approx. 4600 × 2000 × 2650 mm

Condition: used, functionality: fully functional, For sale are several spindle motors and servo motors from the manufacturers Mitsubishi, Siemens, and Mazak. The technical condition of the motors has been checked, and they are ready for immediate use. MITSUBISHI: • Mitsubishi Spindle Motor SJ-4-VKS15-13ZM (2004) • Mitsubishi Spindle Motor SJ-4-KS15-U62M (2000) • Mitsubishi Servo Motor HC-H153S-A47 (2004) • Mitsubishi Servo Motor HC-SF52K-S1 (2x available) • Mitsubishi Servo Motor HC-SF52BK-S2 • Mitsubishi Servo Motor HC-H203BS (2004) • Mitsubishi Servo Motor HC153S-SZ (2x available) SIEMENS: • 3 Permanent Magnet Motors 1FT5064-0AF71-2-Z(F) (2x available) • 3 Permanent Magnet Motors 1FT5074-0AK71-2(F) The spindle motors are sold on an exchange basis. This means you receive a refurbished, tested spindle motor from us, while we receive your defective unit in return. As a result, your production can continue without major downtime and unplanned outages are minimized. Alternatively, you can commission a repair only. We take care of the entire process: we disassemble the spindle motor, repair or refurbish it in our workshop, and reinstall it afterwards. So you have a single point of contact for the entire process – from disassembly to commissioning, everything from one source! INFORMATION: We have a wide range of drive and servo motors for CNC machines and other machinery in stock, and we also offer repair services for them. Please send us your inquiry – we will promptly check availability for your machine. If you have any further questions, please feel free to contact us at any time. Our service promise: For us, quality, expertise, and customer satisfaction come first. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and with a passion for machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability assumed. Ppedpfxjxwi Uco Ag Der

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: Z293-068, functionality: fully functional, pressing force: 407 t, table width: 1,500 mm, table length: 2,500 mm, overall weight: 32,000 kg, control type: CNC control, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Table width: 1,500 mm Table length: 2,500 mm Hydraulic pressure: 320 bar Ppsdpfoxm R S Isx Ag Der Nominal force: 2 x 2,000 kN MACHINE DETAILS Electrical specifications Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Connection: 42 kW Rated current: 100 A Dimensions & Weight Dimensions: 5,000 x 4,000 x 3,800 mm Weight: 32,000 kg EQUIPMENT CNC control Cooling unit Filter extraction HILMA console throat (1,600 mm)

Condition: new, Brand new Servo press ISGEC from min. 300t up to max. 4000t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Psdpoihfxiefx Ag Djpr

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Psdpfx Aowva I Heg Djpr Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Year of construction: 2019, condition: new, We offer press brake tooling and stamping tools machines for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, HACO. Standard and special tools Send us your wishes and we offer matching tool. Pjdpsd H T Tfsfx Ag Dopr

Condition: used, Drive motor, DC servo motor LENZE type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial no. 184592 Year of construction: 1993 Rated power: 4.2 kW Operating voltage: 260 V DC Rated current: 20 amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 amps - Electric brake Shaft diameter: 24 mm (shaft with 8 mm feather key) Shaft length: approx. 47 mm (shaft protrusion from centering edge) Centering flange diameter: 110 mm Bolt circle diameter: 130 mm, 8 x M8 thread - Encoder, speedometer, GBR 190V Ppjdpfx Astpkx Neg Djr Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Speed max. 9000 rpm External fan LENZE (EBM) type G2E 120 Mains connection: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Weight: 45 kg good condition

Condition: ready for operation (used), Schüco Tool Pressing Tool Punching Tool, Ppodpfxed Sc D Sj Ag Dor Item No.293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5pc. Without number

Condition: not inspected (used), functionality: unexamined, table width: 500 mm, table length: 650 mm, overall weight: 1,500 kg, wheel diameter: 2,000 mm, No reserve price - guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 650 mm x 500 mm Flywheel diameter: approx. 2,000 mm Pedpfx Agoxqnu Ue Dspr MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 mm x 2,000 mm x 2,100 mm Weight: 1,500 kg

Condition: not inspected (used), functionality: unexamined, table width: 390 mm, table length: 450 mm, overall weight: 700 kg, hole diameter: 90 mm, wheel diameter: 1,500 mm, No reserve price - guaranteed sale to the highest bidder! Pedpfx Agsxqnrme Dopr The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 450 x 390 mm Hole diameter: 90 mm Flywheel diameter: 1,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 2,000 mm Weight: 700 kg

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Height: 120 mm Psdpfxjxl E Nfj Ag Depr Key features: Electro-hydraulic drive Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Ppsdeq Dpxdjpfx Ag Dsr Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

Condition: new, Year of construction: 2025, stroke length: 300 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, table height: 900 mm, controller manufacturer: ESA, controller model: ESA S830, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 3,345 mm, control type: CNC control, number of axes: 4, actuation type: electric, Bending Capacity: 3100 mm / 160 Tons (E160 Model) STANDARD FEATURES CNC belt-driven servo press brake CNC-controlled Y1 – Y2 – X – R axes (4 axes) CNC control unit (ESA S830 – 10" touchscreen, 2D graphic display) Automatic bending calculation and collision avoidance functions High-precision synchronized servo drive system Belt-driven upper beam movement system requiring no lubrication and minimal maintenance Spring-loaded upper beam structure supporting energy recuperation O-Type rigid frame design (minimum deformation) 300 mm stroke 410 mm throat depth Servo-motorized backgauge system (X + R axes) Backgauge positioning accuracy: ±0.03 mm Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm Hardened ball screws and linear guides 2 pcs, 3-stage backgauge fingers European style quick-release top tool holder (Promecam type) European narrow lower table Standard top punch (H: 67 mm – 85° – R: 0.8 mm) Standard bottom die (60×60 mm – 4 V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) High-precision optical linear encoders LED work area lighting Sliding front support arms Dual foot pedal Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Additional backgauge axes (Z1 – Z2 – X5) Extension of backgauge travel up to 1000 mm Psdpfx Ajx Nquwjg Depr Motorized crowning system Hydraulic top and bottom tool clamping systems Front safety laser system (AKAS or DSP type) Rear safety light barrier CNC-controlled sheet support arms Laser bending line Laser angle measurement system Automatic angle measuring systems Air-conditioned cooling system for electrical cabinet Additional backgauge fingers Custom tool and table solutions TECHNICAL SPECIFICATIONS (E160 / 3100 MODEL) Bending force: 160 tons Bending length: 3100 mm Distance between side frames: 3345 mm Stroke: 300 mm Throat depth: O-Type frame Open height (upper-lower beam opening): 515 mm Table height: 900 mm Speeds: Descent speed: 90 mm/s Bending speed: 10 mm/s (in accordance with CE standards) Return speed: 90 mm/s Backgauge: X axis travel: 750 mm R axis travel: 250 mm X axis speed: 400 mm/s R axis speed: 100 mm/s Z axis speed: 600 mm/s General: Main motor power: 2 × 7.5 kW Machine weight: approx. 9,500 kg Machine dimensions (L×W×H): approx. 4600 × 2100 × 2700 mm

Condition: new, Press brake tool/upper punch for Bystronic press brake P5 RFA Style 30 degree H250mm R1.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment Ppsdpfoiim Dwsx Ag Dsr

Condition: new, Press brake punch of amada/promecam style 30 degree R0.6mm, H104mm, L835mm, L835mm segmented Pjdpfx Aoin I Dtog Dspr