Used Tracto-Technik Pipe-Bending Machine for sale (74,371)

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE Dcsdpfx Aqjxackcjcoh SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Dcedpeid Al Nsfx Aqceh Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness Dsdowfc S Tspfx Aqcjch -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: excellent (used), Year of construction: 2014, sheet width 2050 mm plate thickness 6.0 mm ST pre-bending 5.0 mm ST Djdjy Uy R Sepfx Aqcsch diameter of upper rolls 170 mm side roll diameter 165 mm diameter of lower rolls 135 mm Control SIEMENS oil volume 80.0 Liter voltage 380 V total power requirement 7,5 kW weight 3450 kg Dimensions (only the machine) 3750 x 1170 x 1000 mm very good condition (!!) current new price incl. accessories approx. 70.000 Euro special price on request The FACCIN 4HEL model series is regarded in the industry as one of the most most precise, reliable and productive electronic 4-roll round bending 4-roll round bending machines worldwide. It has been specially designed for high throughput rates and maximum accuracy for medium to heavy sheet thicknesses. Features: - robust electro-hydraulic 4-roll round bending machine * with linear guidance of the rolls * the side rollers move on a straight, diagonal axis . up and down * extremely short distances between the rollers, . which increases the bending quality - 4-roll concept offers a wide range of bending and rounding options - Freely movable control unit * SIEMENS numerical control with touchscreen * Control of all rollers and machine axes * Digital position display of the side rollers * Manual operation possible via electric buttons - Infinitely variable adjustment of the bending speed - top roller and bottom roller with hydraulic motors and planetary gears * active rotary movement = side rollers run freely with - Conical rolling possible by tilting the rollers * Reduction of the maximum material thickness by approx. 50-60 % . during conical bending - Electronic roller parallelism (EPS) - Bending on both sides - diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - safety device (safety line with switch unit) - Manual central lubrication - operating instructions incl. circuit diagram CE explanation

Year of construction: 2003, operating hours: 69,600 h, condition: used, functionality: fully functional, Used TRUMPF-PULZER CNC35L tube bending machine We are offering a used TRUMPF-PULZER CNC35L tube bending machine for sale. Technical data: Manufacturer: TRUMPF-PULZER Type: CNC35L Machine No.: 837 Year of manufacture: 2003 Electrical connection values: Voltage: 400 V / 3~ Frequency: 50 Hz Current consumption: 21 A Connected power: 14 kVA Bending capacity: Bending direction: Left-hand Suitable for tubes made of steel, stainless steel and non-ferrous metals Maximum tube dimensions: Ø 35 x 2 mm with a bending radius of R = 2 x D Tube feed length: approx. 3,000 mm Equipment: Mandrel bending device Dimensions and weight Installation dimensions (L x W x H): approx. 5,550 x 2,520 x 1,560 mm Machine weight: approx. 2,500 kg Dcsdpfx Aozaqm Toqcjh Description: The TRUMPF-PULZER CNC35L is a robust and proven CNC tube bending machine for the precise processing of steel, stainless steel and non-ferrous metal tubes. Thanks to the integrated mandrel bending device, the machine is particularly suitable for demanding bending tasks with high quality requirements. The machine dates from 2003 and is offered in used condition. If you are interested or would like further information, please do not hesitate to contact us. Inspections are possible by arrangement.

Condition: used, functionality: fully functional, Heavy-duty 3-roll pipe bending machine for round bending of steel pipes and profiles into rings, circular arcs, or spirals. Classic design with grooved pressure rollers (several diameters visible) and a sturdy base – very stable. The number of grooves allows bending of different pipe diameters without retooling. Suitable for heating construction, plant engineering, steel construction, railing construction, and blacksmithing. Such machines are becoming rare on the used market – the new price of comparable equipment is often a five-figure sum. Technical data: - Design: 3-roll pipe bender (profile ring bending machine) - Drive: manually operated or motorized (to be checked on-site) - Rolls: with several grooved profiles - Construction: heavy steel housing on a base Dcedpfozab Hqox Aqcoh - Inventory No.: 500005 - Weight: approx. 300-600 kg - Year of manufacture: approx. 1970s-1980s Collection/Transport: Self-collection with forklift/crane. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: excellent (used), Year of construction: 2022, sheet width 2050 mm plate thickness 4.5 mm ST pre-bending capacity 4.0 mm ST roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Current new price: approx. 13.000 Euro good condition (!!) Special price upon request Features: - Robust electromechanical plate rolling machine - 2 centrally driven rollers (top and bottom rollers) powered by an electric motor - Manually swiveling top roller with hinged bearing - Includes conical bending device - Freestanding control panel - Manually adjustable bottom roller (via handwheel) - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety line with switch unit) - CE marking / Declaration of Conformity Special equipment included in the price: Djdjy Umc Ispfx Aqcech - Hardened rollers - Motorized adjustment of side rollers - Digital position display for the motorized side roller

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible Djdpfx Aox Sr Dfsqcsch - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Dcodsmqk Tpepfx Aqcjh Power - 3,5 kw

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Dsdpfx Ajn Ut A Sjqcoch Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: excellent (used), horizontal bending machine Dsdoy Uc U Topfx Aqcjch Manufacturer: Stierli-Bieger Type: 120 SB DGSL Bending capacity for flat steel: 130 x 12 Pipe diameter up to: G-pipe 1 1/2 Pressing force: 12 tons Stroke length: 170 mm 380 volts 1.5 kW Year of manufacture: 1992 Transport dimensions: Length: 1100 mm Width: 750 mm Height: 1150 mm Weight: 420 kg

Condition: ready for operation (used), Year of construction: 1996, Pressing force: 20 t for pipe diameter: 3/8; 1/2; 3/4; 1; 1 1/4 and 1 1/2 and 2" Dcodpfjy Uv Dnsx Aqcoh Hydraulic drive: 380 V, 0.55 kW Space requirement: 750 x 650 x 900 mm (height) Weight: 170 kg

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm Dcodpoy Uwhbjfx Aqceh - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Djdpfoy Symujx Aqcech Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, total width: 350 mm, total length: 1,500 mm, total height: 530 mm, bending angle (max.): 135 °, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Dcodpfx Aqoytfabjceh Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise - Suitable for horizontal/vertical use - Foot control - Emergency stop - Documentation Dedpfx Aqjwv Ufascech - 400V

Condition: new, Year of construction: 2026, - Capacity 700 x 4 mm Oxbmp - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical roller - Rotating upper roller - Brake motor - Foot switch Dcodpfx Aeh Rbvgoqcoh - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, number of rollers: 3, - Capacity: 700 x 4 mm Dedpfx Aqsh Raytocjch - Conical rollers - Removable upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, SHUZ TUNG CNC38BR2 CNC Tube Bending Machine Manufacturer: SHUZ TUNG Machinery Industrial Co., Ltd. (Taiwan) Model: CNC38BR2 Year of manufacture: 2018 Technical Data: * Maximum tube capacity: 38 x 2 mm * Power: 22 HP * Power supply: 400 V * Machine weight: 2,500 kg Description: SHUZ TUNG CNC38BR2 CNC tube bending machine in very good technical and visual condition. The machine is equipped with a CNC control system and is offered with a large tooling package included in the sale. Suitable for bending steel, stainless steel, aluminium and other metal tubes. The machine features a fully enclosed safety guarding system and automatic tube feeding. Ideal for automotive, furniture, handrail, exhaust and industrial tube production. Included Tooling: * Ø8 mm – R17.5 * Ø10 mm – R15 * Ø10 mm – R28 Dcedpoza Sw Hofx Aqcsh * Ø12 mm – R26 * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70 Machine can be inspected on site. Loading assistance available. Location: Poland. Additional photos and videos available upon request.

Condition: good (used), Year of construction: 1996, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Djdey Uwrtepfx Aqcjch Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: good (used), – Hydraulic – Adjustable stroke – Foot pedal operation – Includes 5 dies: 2" / 1½" / 1¼" / 1/2" / 1/4" Dcodpey T D Hnefx Aqcsh – 380V

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg Dcedpfx Aqsfg Th Aocsh

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 Dodpfx Aqou Ibvuecsch weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm Dcjdpfxou Icdye Aqcjh -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V Dcodpfxjxu Dxqe Aqcsh revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *