Used Trowal Carl Kurt Walther Ms 600 Ms 600 for sale (14,823)

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Dksdpfeu N Agkex Akmou Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! *

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 2,660 kg, load capacity: 600 kg, arm reach: 2,826 mm, controller manufacturer: Kuka, Equipment: documentation/manual, KUKA KR 600 R2830 / FLR industrial robot, manufactured in November 2021. The robot is unused and has 0 operating hours. Main specifications: * Payload: 600 kg * Maximum reach: 2,826 mm Dsdpfx Akjz D Tkremeku * Robot weight: 2,660 kg * Serial number: 1414192 * Year of manufacture: 2021 * Condition: New / unused, 0 operating hours The robot has never been used in production and is in excellent condition.

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Dkedpfxewzmu Ro Akmou Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: used, Year of construction: 1998, operating hours: 120,000 h, functionality: fully functional, machine/vehicle number: S97125901, power: 200 kW (271.92 HP), volume flow: 34.1 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Atlas Copco ZT 200 – oil-free rotary tooth compressor including MD 600 dryer For sale is a well-maintained and fully functional compressed air system consisting of an Atlas Copco ZT 200 compressor and an Atlas Copco MD 600 dryer. The system comes from a professional industrial application and was maintained, inspected, and serviced there exclusively with original Atlas Copco maintenance parts, as specified by the manufacturer. The condition is good for its age; the system is operational and fully functional. Technical data – Compressor – Atlas Copco ZT 200 Design: oil-free rotary tooth compressor Type: ZT 200 Power: 200 kW Max. operating pressure: 7.5 bar Operating hours: approx. 120,000 h Speed: 1,495 rpm Year of manufacture: 1998 Serial number: S97125901 Manufacturer: Atlas Copco Airpower, Belgium Control: Atlas Copco Elektronikon Drum dryer – Atlas Copco MD 600 Type: MD 600 Atlas Copco control with SMARTLINK Djdpfxoz E U Smj Akmsku Year of manufacture: 2023 Operating hours: approx. 4,300 h Serial number: 605608 Art.-No.: 170-016733 Manufacturer: Atlas Copco Airpower, Belgium The compressor and the dryer are part of the offer and will only be sold together. Condition: used, in good condition for its age, technically well-maintained, regularly serviced and inspected, fully functional. Inspection possible by arrangement. Further technical documents or information available upon request.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 70 mm, total width: 655 mm, total height: 110 mm, total length: 3,000 mm, conveying length: 3,000 mm, construction height: 110 mm, axle spacing: 70 mm, overall weight: 45 kg, empty load weight: 45 kg, TAF item number: 1000005919 Manufacturer: TAF Industriesysteme Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 3,000 x 655 x 110 Width including side rail in mm: 655 Side rail height in mm: 110 Conveyor length in mm: 3,000 Dodpfxoz Hlixj Akmeku Conveyor width in mm: 600 Conveyor height in mm: 110 Roller pitch in mm: 70 Support structure: none Support roller axle type: spring-loaded axle Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: plastic Drive: gravity Net weight in kg: 45 Special features: end stop, side guide Condition: used / fully functional Functional test: OK

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 12,188 h, load capacity: 2,500 kg, lifting height: 4,295 mm, fuel type: electric, mast type: simplex, construction height: 2,750 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Dkedpfx Asz H Eq Aokmsu Side shifter, fork positioner, 4th valve, heater, air conditioning, full free lift.

Condition: ready for operation (used), Wolke M 600 advanced labeling system controller Device is in very good condition ( like new ) 230 V 50/60Hz Accessories: Rotary encoder for Wolke printer Splitter box for Wolke printers Print head for Wolke printer You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Dkodpop T Uiqjfx Akmju Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2007, condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Dedpfeh Agwrox Akmeku MARCELS MASCHINEN CH

Condition: used, mileage: 589,583 km, power: 155 kW (210.74 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 6,130 kg, maximum load weight: 1,360 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, cabin, central locking, cooling unit, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, tail-lift, traction control, * German vehicle * Condition: see photos * Body type: refrigerated van * Carrier Xarios 600 freezer unit * Temperature range: -20°C to +18°C * Diesel and electric drive * Very flat evaporator for optimal loading * Load area: Length 6.00 m, Width 2.45 m, Height 2.20 m * Side door of the refrigerated van on the right * Lashing rails on the left and right * Aluminum load floor with DIN lashing eyes * Tail lift, BÄR brand * Max. load capacity: 1000 kg * Foot switch * Roll-away protection * Air conditioning * Automatic transmission * Multifunction steering wheel * Cruise control * Lane keeping assist * Hill start assist * Cab with 2 seats * Air-suspended driver's comfort seat * Seat heating * Electrically adjustable and heated mirrors * ABS/ASR/ESP * Electric windows * Sunroof * Work lights * Radio CD * Differential lock * Daytime running lights * Leaf/air suspension + raise/lower function * Wheelbase: 4,200 mm * GVWR: 7,490 kg * Unladen weight: 6,130 kg * Payload: 1,360 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Dedpfx Asw Dd Aqjkmjku Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Year of construction: 2004, operating hours: 4,840 h, condition: ready for operation (used), Machine tool manufactured in 2004. This MYLÄP BLP 600/3S features a power of 2.2 kW and operates at a supply voltage of 400 V. If you are looking to get high-quality capabilities, consider the MYLÄP BLP 600/3S machine we have for sale. Contact us for further details. Djdpfxsz Hvgus Akmsku • Supply Voltage: 400 V • Power: 2.2 kW • CE Certified

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 590 h, load capacity: 4,000 kg, lifting height: 4,900 mm, fuel type: electric, mast type: simplex, construction height: 3,304 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Dkodjz I Hx Rjpfx Akmsu Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Side shifter, 3rd valve, 4th valve, heater, full cabin, air conditioning, Camera

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,200 kg, fuel type: diesel, maximum load weight: 500 kg, empty load weight: 1,380 kg, fuel: diesel, loading space volume: 0.6 m³, Year of construction: 2014, operating hours: 179 h, Equipment: all wheel drive, second-hand vehicle warranty, HAKO CITYMASTER 600 Multifunctional 4x4 Municipal Street Sweeper (2014 Model) – Excellent Condition Dodpfx Aoz Ia Ufjkmeku INSTALLED EQUIPMENT: Dual-brush sweeping system – NEW hard brushes with added wire bristles are ideal for removing dirt from public roads, parking lots, and pathways. Hydraulic controls inside the cab allow for working width adjustment between 1,380 mm and 1,800 mm, while the spray system binds loose dirt and prevents it from becoming airborne. Multifunctional hopper – A versatile hopper with a 600-liter usable capacity, made from a corrosion-resistant aluminum alloy (resistant to water and road salt), suitable for various tasks such as collecting sweeping debris, grass clippings, or leaves. The hopper can be filled to its maximum capacity. Emptying is effortless thanks to hydraulic lifts that raise it to the desired height. Manual suction hose – A Ø125 mm suction hose mounted on a movable boom functions like a vacuum cleaner, making it ideal for collecting leaves or smaller waste items such as packaging and bottles. Built-in high-pressure washer – Located at the rear of the machine, this washer features a 10-meter hose, enabling high-pressure cleaning of various surfaces—from asphalt and paving stones to walls and street furniture. Work and spot lighting – Full road lighting enabling travel on public roads, complemented by optional work-area lighting to improve working comfort during twilight or in conditions of poor visibility. Windshield wiper with washer, Bluetooth/USB radio, warning beacon, horn, operator seat with mechanical height adjustment TECHNICAL DATA: Model: Citymaster 600 Year of manufacture: 2014 Sweeping module operating hours: 57 h Total operating hours: 179 h Working width: 1380 mm – 1880 mm Debris hopper capacity: 600 l / 500 kg Fresh water tank capacity: 150 l Curb weight: 1380 kg Gross vehicle weight: 2200 kg DRIVE: Engine: Yanmar 3TNV88C-ZMHW – 1642 cc – Diesel Fuel tank (l): 41 Number of cylinders: 3 Power: 24.2 kW (32.91 hp) Engine speed: 2630 rpm (max) / 1900 rpm (Eco) Torque: 104.8 Nm Driving speed (forward/reverse): 25 km/h / 10 km/h Gradeability: 25% Hydraulic oil tank capacity: 35 l Hydraulic oil type: HVLP 46 DIMENSIONS: Length: 3899 mm Width: 1090 mm Width with brushes in transport position: 1380 mm Height: 2269 mm INCLUDED: Refurbished suction nozzle with new rubber skirts and a new suction hose leading to the hopper NEW 4m suction hose for the handheld vacuum (Ø125 mm) NEW side brushes (PPL 1.8 + wire mix) (2x) NEW KENDA 23X8.5-12 10PR TL E K500 Super Turf tires (4x) NEW 12V 71Ah starter battery NEW air, fuel, and oil filters, plus an oil change service Pressure gun + 500mm lance + power nozzle + 10m high-pressure hose Windshield wiper and washer, Bluetooth/USB radio, warning beacon, horn, operator seat with mechanical height adjustment We can provide a full gallery of 58 photos upon request.

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Dkodpfx Aksz Iqz Njmou Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Dsdpfoz Iq Agsx Akmoku Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Dodpfx Akozrvy Uomjku Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: new, functionality: fully functional, machine/vehicle number: 13289, table bore: 400 mm, overall weight: 10,000 kg, input frequency: 50 Hz, input current: 72 A, workpiece diameter (max.): 650 mm, spindle speed (max.): 10 rpm, The DC 600 gear shaping machine is the ideal solution for producing large-scale internal and external straight spur gears, thanks to its extended capacity and robust structure. The CNC-controlled automatic cutter positioning feature allows for rapid setup and reduced cycle times by limiting the total cutter stroke to the minimum required. The zero center distance between the workpiece table axis and the cutter spindle axis allows for the processing of a wide range of workpiece diameters, from medium-large to small. It adapts perfectly to both diversified and dedicated production, including robot automation for unmanned operation. Dsdpfjz Irbdex Akmeku

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,208 h, load capacity: 5,000 kg, lifting height: 2,780 mm, fuel type: gas, mast type: telescopic, construction height: 2,250 mm, motor manufacturer: VW, gearing type: other, fork length: 150,602,400 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 250-15, overall weight: 7,135 kg, total height: 2,250 mm, total length: 3,200 mm, total width: 1,550 mm, fuel: liquid petroleum gas (LPG), motor model: CHT, Equipment: sideshift, STILL RX 70-50 T-600 /2018 – LPG forklifts TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 2.780 mm Closed height: 2.250 mm Mast: Standard (2W278) Fork length: 150.602.400 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW CHT Transmission: elektrisch Tyres: Superelastik SE 355/50-15 (80%) / 250-15 (60%) Service weight: 7.135 kg Length: 3.200 mm Width: 1.550 mm Year of manufacture: 2018 Operating hours: 10.208 h Dodpez Ap S Sjfx Akmjku Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Rental truck – Rental price on request. Internal no.: 1201898 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2008, Roll production line König Basic Rex II Combiline 600 Year of manufacture: 2008 Condition: Currently undergoing maintenance; photos taken before maintenance For the production of round, oval, stamped, oblong, and flat products made from wheat dough, mixed wheat dough, cereal dough, or fine yeast dough Suitable for shaped rolls, oblong rolls, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for oblong dough products) Dsdpfsz A Rynjx Akmsku Weight range: 35–85 g Dough divider and rounder, type Basic Rex II, 5 rows Long-working board before the proofing cabinet Proofing cabinet with climate control Stamping station with reversible cups for stamping round and oblong products Forming station with 2 pressure rollers and a driven upper belt Depositor for 60 x 80 cm or 60 x 100 cm baking trays and boards Manual removal of baking trays Includes stamping tools for Kaiser rolls, Housky rolls, and oblong dough rolls Includes dough divider block for 5- and 3-row operation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 600 CNC Control system: Heidenhain TNC 640 Year of manufacture: 2015 Internal machine number: 76 Travel ranges: X-axis 600 mm Dksdpfx Aez A Tz Iskmsu Y-axis 400 mm Z-axis 400 mm Spindle taper: SK 40 DIN69871 Spindle speed: 1 - 5,000 rpm

Condition: used, Year of construction: 2018, Kannegiesser belt conveyor GF 1000-680-600 RA1303 The Kannegiesser belt conveyor is from 2018 and is in good (used) condition. Technical data: Conveyor length (NL): 1000 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height (BH): 80 mm Conveyor speed (v m/s): 0.67 m/s Drive: Bauer Gear motor Electrical data: 400 V / 50 Hz, 0,37kW Return roller (UT): Ø = 60 mm Belt: 2-ply PVC belt, gray, smooth Year of construction: 10/2018 Optionally available: Supports Side guides Frequency converter for stepless speed control All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Dksdpsukkqxefx Akmeu For individual, professional advice, simply contact us. Simply contact us by phone or email. We are happy to help you plan and implement your projects. We are happily looking forward to hearing from you. Sincerely, Your team at Dr. Sonntag GmbH & Co. KG - your specialist and contact for intralogistics

Condition: used, Year of construction: 2012, Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Electronics: 4x load cell: Interface, MB-150-38 ML-1106B Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Other measuring device e.g. Metler Toledo IND400 Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Dedpjlw A Emsfx Akmoku We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 2300-600-500 RA2057 Technical data: Conveyor length (NL): 2300 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Dkodpfx Akjnp Uhyemju We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Dkedpfx Aen I Uwfskmsu Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 2670-600-500 RA2068 Technical data: Conveyor length (NL): 2670 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Dedpfjn I Uwmex Akmjku Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/Th Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 1300+6000+1900-700-600 RA2072 Technical data: Conveyor length (NL): 9200 mm ( 1900 mm arch + 6000 mm riser segment + 1300 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Dkedpfx Asn N A Ifjkmou Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics