Used Tube Bending Machine Tracto Technik for sale (75,026)

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Hodpfsytgpdex Aaiefk

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Hfjdpfx Aeuwrv Doaijk

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Hodpfx Aajwwlkioisfk

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Hjdpfx Aasxl Up Usisfk

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Hedoycwtfepfx Aaiofk

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Hodpfx Aewg E Dhoaisfk

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Hfsdpfxezka Nwj Aaiok

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Hfjdpfx Aezuf Dhoaiok Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Hfjdpfx Ast Akt Roaiok Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Hsdjgd T R Dopfx Aaiefk Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Hjdjiivg Sepfx Aaijfk Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions Hjdpfx Ajt Akxajaisfk

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Hfedpfjwwt Ddjx Aaiok Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel Hfodpfswwt Hfox Aaijk External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Rollers for 1" pipe Straightening rollers Operator's key Operating manual

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Hfodpfx Aajd N Ahdoiok

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Hfodjd Eqg Hspfx Aaiek Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Hfedpocuxp Tofx Aaisk Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min Hfedpec S N Riefx Aaisk immediately available from the factory!

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: Hfjdpecuxpqofx Aaijk All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine Hjdpfec S N Nqox Aaisfk

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Hfodpfx Aaenvfc Eoijk

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Hfodpenvfdbefx Aaiok

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm. Hsdpfx Aaonvfdfeiofk

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Hjdpfxjy Sanrj Aaisfk Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Hfodolc N Spjpfx Aaiok