Used Unbekannt Lc-05/Ni-100 D Dm for sale (69,109)

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 5,1kW - Two lanes Additional information Nedpoy Scb Uefx Agrewl - conveyor for packages available

Condition: good (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, filter regulator with pressure gauge -Type:LFR-1/4-D-MINI 159631 -Pressure: max. 16 bar Nwedpfxsxv S N Ts Agrel -Quantity: 1x filter control valve available -Dimensions: 210/120/75 mm -Weight: 0.6 kg

Condition: used, Technical data: Njdpfxjzrxuno Agrowl - Pressure: 100 bar - Capacity: 2 L - Motor: 0.75 kW

Condition: new, table diameter 2000 mm table load 10000 Kg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Nwodpfjfv Ay Iex Agrjl

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Nwodpfx Aoymi Naegrsl We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: used, Year of construction: 2022, Overall rating (1: poor, 5: like new): Very Good Nwodpfozkzzhex Agrjl ---- UVV compliant, as new!

Condition: good (used), electric motor, three-phase motor -Electric motor: Type DM 63 K 2 -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 11 x 22 mm -Design: B3 Nsdpev Ia Ilsfx Agrewl -Protection class: IP 55 -Dimensions: 220/163/H150 mm -Weight: 6.5 kg

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Nwjdoz Adl Hepfx Agrel

Condition: new, weight max. 100 t workpiece diameter 1000 - 6300 mm drum diameter 500 x 240 mm Nedpfxjfv A Dve Agrowl feed 100 - 1000 mm/min total power requirement 2 x 3 kW

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Gill tool, notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg Nsdpozr Hlzsfx Agrewl

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, roll pitch: 155 mm, total width: 955 mm, total height: 90 mm, total length: 2,180 mm, conveying length: 2,180 mm, construction width: 955 mm, construction height: 90 mm, TAF article number: 1000004053 Overall dimensions: approx. 2,180 x 955 x 90 mm (LxWxH) Width incl. side: 690 mm Side panel height: 80 mm Width incl. drive: 955 mm Conveyor length: approx. 2,180 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 155 mm Roller diameter: 60 mm Drive type: Gravity Conveyor speed: constant Condition: Used / fully functional Nsdpot H Ic Refx Agrewl Function test: OK

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 60 mm, roll pitch: 155 mm, total width: 955 mm, total height: 90 mm, total length: 2,500 mm, conveying length: 2,500 mm, construction width: 955 mm, construction height: 90 mm, TAF article number: 1000004052 Overall dimensions: approx. 2,500 x 955 x 90 mm (LxWxH) Width incl. side panel: 690 mm Side panel height: 80 mm Width incl. drive: 955 mm Njdet H Ez Depfx Agrswl Conveyor length: approx. 2,500 mm Conveyor width: 855 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 155 mm Roller diameter: 60 mm Drive type: Gravity Conveyor speed: constant Condition: Used / fully functional Function test: OK

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems Nwsdpfxofzlv Ao Agrjl -Price: complete -Dimension: Ø 220 x 105 mm -Weight: 5,5 kg/piece

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Nodpfozcnugox Agrowl Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm Nwedov Ti A Aspfx Agrol -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Capacity: 15-100 kg/h Year of manufacture: 1998-2006, multiple units available Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. Nedeh Ibgpspfx Agrswl All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. We will, of course, take care of all formalities. Loading possible.

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Nwodjd Hintopfx Agrsl Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Condition: used, mileage: 135,000 km, power: 115 kW (156.36 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 5,530 kg, overall weight: 7,490 kg, wheelbase: 4,250 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 3, total length: 7,220 mm, total width: 2,600 mm, total height: 3,340 mm, loading space length: 4,950 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Equipment: cooling unit, tail-lift, truck registration, Refrigerated box, internal length 4.95 m, Thermo King MD-100 deep-freeze unit, Refrigeration unit, diesel/electric, Nwedeynl R Aepfx Agrol Standby cooling (mains operation 380 V) and on-the-move cooling down to -29°C, Palfinger tail lift, 1000 kg, Wheelbase 4250 mm, 6-speed transmission, Driver's air suspension seat, Passenger double seat, Gross vehicle weight 7.49 t, Payload 1.96 t, EURO 5, MOT due - will not be renewed, German registration Mileage according to odometer Vehicle preferably sold to commercial businesses or for export, Private sale possible, subject to agreement Sold without warranty Net price for export Net: 9,800 EUR + (19% VAT) 1,862 EUR = Gross: 11,662 EUR The aforementioned details are non-binding; errors/changes and prior sale are subject to change! T 08026/2188

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg Nwsdpfx Ajn Hbckjgrjl

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200 Nsdpfx Ajd Evcwjgrewl

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 605 mm, roll pitch: 75 mm, total width: 660 mm, total height: 70 mm, total length: 1,970 mm, conveying length: 1,800 mm, construction width: 665 mm, construction height: 75 mm, roll spacing: 75 mm, TAF article number: 1000003930 Technical data: Overall dimensions: approx. 1,970 x 665 x 75 mm (LxWxH) Shelf width: 665 mm Cheek height: 65 mm Conveyor length: 1,850 mm Conveyor width: 605 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 75 mm Roller diameter: 50 mm Drive: Gravity Nedpjtx Dd Nsfx Agrjwl Condition: Used / fully functional Function test: OK

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: 130 mm -Plating: brass Nwjdpsckvdaefx Agrol -Hole spacing: mm -Tip height: 95 mm -Drawings with the photos -Price: per piece -Number: 2x available -Dimensions: 380/350/H110 mm -Weight: 15 kg

Condition: good (used), Sensor-actuator distributor, distribution strip, distribution box, HV distributor, HV distributor -Manufacturer: Escherich, High Voltage Distributor -Type: 100082 (ES108) HVD-05 Nsdpep Hix Dsfx Agrswl -Quantity: 2x distribution block available -Price per piece -Dimension: 130/120/H50 mm -Weight: 0.5 kg

Condition: new, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or stamping separation of metal parts, with dimensions ranging from 50 x 50 mm up to 1100 x 100 mm. The 1st station processes the products using a contact roller (approx. 55° Shore) with a sanding belt, removing heavy burrs in the first step. The 2nd station processes the products with two counter-rotating transverse belts from below and above. The transverse belts round the edges of the parts to be processed, both on the inner and outer edges. A major advantage is also the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 Z2C: Nedpfx Asd Ixadogrjwl Working capacity (diameter mm) 1100x100 Number of belt stations (Z) 1 Number of transverse belt stations 2 Sanding belt, dimensions (mm) 1100x2200 Sanding belt speed (m/s) 8-22 Transverse belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Transverse belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Dust extraction connection per head (diameter mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: ready for operation (used), CRE Rösler Electronic CDFM150BX08 monitor A01-10169 SN: 1000951 / 100-245V AC / 40W, used, in good condition, 100% fully functional, delivery as shown in photos. Nwjdsx Eq Enspfx Agrel