Used Unitech 2019 Large Utensil Washers for sale (10,359)

Condition: ready for operation (used), inner diameter: 1,500 mm, inner dimension height: 900 mm, pressure: 4 bar, temperature: 90 °C, load capacity: 800 kg, operating pressure: 4 bar, For sale: a spray washing machine from the Finnish brand Aqua Clean. The entire unit is made of acid-resistant steel and additionally insulated. The washing area has a diameter of 150 cm and a height of 90 cm. The machine allows for setting the working time and temperature up to 90°C. Spraying is performed from below, from the side, and from above under a pressure of 4 atmospheres. The pump has had its seals replaced with Viton seals, which are resistant to harsh chemicals. It also features an exhaust fan for removing fumes. The load capacity is 800 kg. A video demonstrating the machine in operation is attached to the advertisement. Transportation is possible throughout the EU. Ibjdpfxjzgx H Ts Abhja

Condition: excellent (used), I'm selling a lightly used spray washer from the Danish company Compact, model 1000-H. The machine is ready to work without leaks. We can work on site or send a video. The raised version, which is standard 70 cm high, is 100 cm above the basket. The version is made entirely of stainless steel and is additionally insulated. It sprays from the bottom, top, and side. Adjustable operating time and temperature. The basket diameter is 100 cm. The tank holds 330 liters. It weighs 800 kg. It has a 500 kg load. It has a steam extraction fan. Possible transport within the EU Ibjdpezqd Tyofx Abhsa

Condition: used, fuel type: diesel, Year of construction: 2019, PEUGEOT BOXER, 2019, 118,000 km, total length 5.40m, insulated body with Carrier Strada refrigeration unit, 220W, ATP FRC -20° temperature recorder, valid until April 2028, 2.0HDI engine with 130 hp, vehicle serviced, timing belt replaced, 1-year warranty, financing options available. Ibodpfxozrg Ezs Abhea

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Ijdpfxsdy Hm Nj Abhoba Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, color: orange, operation weight: 180 kg, fuel: super 95, Year of construction: 2019, Beach cleaner: + Nolte Sandtec Budde + BC 1000 / Delfino + self-propelled + Honda GX160 (5.5 hp) + vibrating screen + collection container + dead man's switch + adjustable cleaning depth (0-12 cm) Isdpfxozpadrj Abhoba + working width 75 cm + weight: 180 kg + machine dimensions: 86 cm x 158 cm x 87 cm + theoretical area output: 2,500 m²/hour + year of manufacture: 2019 Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: good (used), Year of construction: 2019, 1x Geiger MidiLiner 15.0S Year of manufacture: 2019 Isdpfozmw A Tex Abhjba

Condition: new, Songu Laser – NEAT Series | Large Format Fiber Laser Cutting Machine (6,000 – 30,000 W) Atlas Tre is an authorized Songu Laser distributor for the Abruzzo, Marche, and Molise regions of Italy, specializing in the supply of high-performance fiber laser cutting systems. The NEAT Series is a large-format fiber laser cutting machine designed to deliver maximum productivity, precision, and reliability in industrial manufacturing. Featuring a modular structure, an automatic focus cutting head, and professional nesting software fully integrated with the laser cutting system, it is the ideal solution for companies seeking outstanding performance and maximum production efficiency. Key Features Laser power from 6,000 to 30,000 W High-rigidity modular frame Automatic focus cutting head Professional nesting and material optimization software High-speed piercing Isdozq Dk Sopfx Abheba Fast cutting of complex geometries Ideal for processing large-format and thick metal sheets Materials Carbon steel Stainless steel Aluminum and aluminum alloys Titanium Galvanized steel Galvalume steel (aluminum-zinc coated steel) Brass Copper Thanks to its wide range of available configurations, the NEAT Series can be customized to meet the specific production requirements of each customer. Request a Customized Configuration Contact our team to receive a tailor-made machine configuration or a personalized quotation. We will be pleased to help you identify the solution that best suits your production needs.

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Ibedpfx Ajzpfiysbhea Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,065 h, machine/vehicle number: 8008, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BECKHOFF, laser type: fiber laser, laser source manufacturer: nLight, laser source model: 15000, laser power: 15,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, table length: 25,100 mm, table width: 3,100 mm, table height: 900 mm, working length: 25,100 mm, working width: 3,100 mm, working height: 900 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.35 mm, workpiece weight (max.): 24,750 kg, type of cooling: water, overall weight: 55,000 kg, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering for sale a state-of-the-art NUKON EXTREME LARGE laser cutting machine from 2022, equipped with a 15 kW nLIGHT fiber laser source with Corona technology, CNC control, and Beckhoff drives. The machine is in continuous production use, fully operational, and available for viewing during operation. This solution is designed for the most demanding production facilities engaged in cutting large-format parts, steel structures, and thick sheets. Technical data: Manufacturer: NUKON Model: Extreme Large 30250 BEVEL Year of manufacture: 2022 Ibodpfx Abszphkmshea Laser power: 15 kW Laser source: nLIGHT Fiber Laser with Corona technology Working area: 3000 × 25000 mm Cutting head: BEVEL – bevel cutting up to ±45° CNC control: Beckhoff Servo drives: Beckhoff Equipment and advantages: - High-performance nLIGHT laser source equipped with Corona technology, enabling dynamic adjustment of the laser beam characteristics depending on the material type and thickness, resulting in higher edge quality, faster piercing, and increased production efficiency; - Professional Beckhoff control and automation system, valued for its speed, precision, and reliability in industrial applications; - BEVEL cutting head, allowing for the execution of welding bevels without the need for additional processing; - Ability to cut large-format sheets up to 25 meters in length; - High dynamic performance and excellent cutting quality; - Ideal for the production of steel structures, components for heavy industry, energy, offshore, shipbuilding, and machine manufacturing. Technical condition: The machine was commissioned in 2022 and has been in operation at a production facility ever since. It is regularly serviced, is in very good technical condition, and is still in use, allowing for the possibility of conducting tests and viewing the machine during operation in production. The buyer has the opportunity to perform their own cutting tests and thoroughly check all the functions of the device before purchase. Upon request, we can provide additional photos, videos of the machine in operation, and a complete technical specification. We invite you to contact us for detailed information and to arrange a demonstration of the machine. PRICE: 300,000 EUR

Condition: excellent (used), Equipment: type plate available, ZEISS O-INSPECT 442 Multisensor CNC Coordinate Measuring Machine Manufacturer: Carl Zeiss IMT GmbH, Germany Type: O-INSPECT 442 Machine Type: Multisensor CNC Coordinate Measuring Machine Measuring Range: 400 × 400 × 200 mm For sale is a used ZEISS O-INSPECT 442 coordinate measuring machine, including a comprehensive set of original ZEISS accessories, measuring sensors, software, and a vibration isolation platform. The O-INSPECT 442 combines highly precise optical and tactile measuring technology in a CNC-controlled measuring machine. The combination of ZEISS Discovery V12 zoom optics, VAST XXT probe system, and the installed ZEISS CALYPSO 2019 measuring software makes this system ideally suited for quality assurance, incoming goods inspection, toolmaking, precision engineering, medical technology, research, and development. Technical Data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: 622810-9806-000 Serial Number: 138890 Year of Manufacture: 2008 Measuring Range X: 400 mm Measuring Range Y: 400 mm Measuring Range Z: 200 mm Max. Workpiece Weight: 40 kg Supply Voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 1500 VA Measuring System: ZEISS VAST XXT tactile measuring system ZEISS Discovery V12 telecentric zoom objective White light distance sensor Coaxial top light Through-light illumination 16-segment multi-color ring light Automatic CNC measuring cycles Software: ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Documentation Dimensions: Machine (W × D × H): approx. 1,055 × 1,351 × 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Bilz vibration isolation platform: approx. 360 kg Total weight: approx. 1,160 kg Equipment: ZEISS O-INSPECT 442 coordinate measuring machine ZEISS VAST XXT probe system ZEISS Discovery V12 zoom optics Original ZEISS control panel ZEISS CALYPSO 2019 measuring software 2 Industrial PCs 2 Monitors Original software media Original ACRONIS recovery/boot media Reference standard Comprehensive set of ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Clamping technology and other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Scope of Delivery: ZEISS O-INSPECT 442 coordinate measuring machine Original ZEISS control panel 2 Industrial PCs Ibjdpfszl Dkujx Abhsa 2 Monitors ZEISS CALYPSO 2019 measuring software Original software media Original ACRONIS recovery/boot media Documentation Reference standard ZEISS measuring probes and styli Several measuring adapters Original ZEISS accessory case Bilz vibration isolation platform Several precision vices Clamping plates Comprehensive clamping and holding devices Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Walter+Bai LFV100-HH Servo-Hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-Hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including hydraulic power unit PAC-40, PCS8000 Digital Controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial production. The original Walter+Bai testing software, the corresponding software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-Hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K25788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Iedpfx Abozlz Rxjhoba Control: Walter+Bai PCS8000 Digital Controller Digital testing machine control Original Walter+Bai testing software available Original software dongle available Industrial PC included in the scope of delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Power Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic hydraulic power unit Water-cooled design Designed for continuous operation PCS8000 Digital Controller mounted Dimensions: Testing Machine (W × D × H): approx. 1,150 × 850 × 2,650 mm Hydraulic Power Unit PAC-40 (W × D × H): approx. 800 × 700 × 1,150 mm Overall transport dimensions (L × W × H): approx. 1,600 × 1,100 × 2,800 mm Weight: Testing Machine: approx. 1,350 kg Hydraulic Power Unit PAC-40: approx. 250 kg Total weight: approx. 1,600 kg Shipping weight: approx. 1,850 kg Clamping System: 2 × mechanical wedge clamping heads Walter+Bai WGR-100-M Several sets of clamping jaws Clamping and mounting accessories as shown in the pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Several sets of clamping jaws Handheld control unit Separate control unit with emergency stop Testing and mounting accessories as shown in the pictures Condition: Used Year of Manufacture 2019 Optical condition as shown in the pictures. Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Sets of clamping jaws Handheld control unit Control unit Further accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Ibedsyl S S Ujpfx Abhsa

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools Isdpfxozmgi No Abhsba - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Multitool Thread forming

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Isdezlg E Iepfx Abhsba Grounding bolt Cables in UL design

Condition: used, Year of construction: 2019, operating hours: 3,089 h, Sennebogen 6113e crawler telescopic crane Year of manufacture: 2019 Operating hours: 3,089 h Lifting capacity: 120,000 kg Lifting height: 40.2 m Lateral reach: 35 m Pick & Carry capacity up to 70,000 kg Adjustable undercarriage – track width 4,200 mm to 5,400 mm 2 winches Winch 1 = 105 h Winch 2 = 402 h Radio remote control for assembly Radio Programmable working area limitation Tiltable cab up to 20° Reversing & side cameras Diesel heater Fuel pump Air conditioning Central lubrication Engine: [168 kW/228 HP] Stage 5 Gross vehicle weight approx. 113,000 kg Rear ballast: 33 t We would be happy to provide a leasing or financing quote upon request. Mr. Mihm (Tel. is available to assist you. Further information can be found on our website. Subject to errors and prior sale. ZSA, quick-change device, rental possible = Further information = Please contact Tobias Ebert for further information. Ijdpfezmct Dex Abhjba

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Ijdov Di Dnjpfx Abhjba Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, load capacity: 4,500 kg, lifting height: 6,400 mm, free lift: 2,500 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,220 mm, motor manufacturer: GM 3.0, fork length: 1,500 mm, overall weight: 11,055 kg, empty load weight: 6,555 kg, total height: 3,220 mm, total length: 1,900 mm, total width: 1,600 mm, Equipment: adjustable boom, pallet forks, sideshift, Promotion New price: 37,900 EUR // Old price: 39,900 EUR We sell forklifts after full service. Prepared for the end user. Ibodezn U Sbjpfx Abhea Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), With additional equipment 2.2 kW with accessories Height approx. 217 cm Ibjdpfexfu Nuox Abhea

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 593 h, load capacity: 1,400 kg, lifting height: 7,000 mm, free lift: 2,330 mm, load center: 500 mm, mast type: triplex, construction height: 2,950 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, Nice reach truck with 2019 battery. Rocla F14 TREV 7000 Load capacity: 1400 kg. Lift height: 700 cm. Overall height: 295 cm. Free lift: 233 cm. Fork length: 115 cm. Side shift. Free lift. Fork tilting. Year: 2003 Operating hours according to hour meter: 593 Battery: Year 2019, 48V 620Ah The machine has hardly been used since the battery was replaced. Iodpfxewxtxwj Abhoba Including charger. Can be loaded onto a truck free of charge. For transport in a standard Eurotrailer, the mast can be dismantled for a small additional fee.

Condition: used, mileage: 670,016 km, power: 220 kW (299.12 HP), first registration: 09/2019, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2019, Equipment: ABS, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Alarm system - Heated mirrors - Passenger seat - Hands-free kit - Roof spoiler - Differential lock - Digital tachograph - Rear doors - Air conditioning - Air suspension - Radio/CD player - Side door - Sun visor - Lane keeping assist - Stability control - Tool kit = Additional Information = General Information Color: Cream License plate: 23-BNT-7 Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Axle Configuration Tire size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 8000 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 10%; Suspension: Leaf spring suspension Rear axle: Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 95%; Tire tread depth left outer: 95%; Tire tread depth right inner: 95%; Tire tread depth right outer: 95%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 9,723 kg Payload: 9,277 kg GVWR: 19,000 kg Functional Tail lift: DHOLLANDIA DHSM.20, tailgate, 2000 kg Ijdpfx Abjzk An Ashsba Cooling: 20 °C to 20 °C Body manufacturer: HARDERWIJK Cooling engine: Diesel and electric Wall thickness: 5 mm Maintenance APK (Technical Inspection): valid until 09.2026

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Cleaning Cabinet Washer The 140L parts cleaning cabinet washer is a professional workshop device designed for effective removal of oils, greases, deposits, and stubborn contaminants from metal and mechanical components. Operating in a closed-loop system, the machine uses cleaning fluid efficiently and economically. Thanks to its large tank capacity and stable construction, it is an ideal solution for industrial plants, workshops, and service facilities. Main advantages of the 140L workshop parts washer Maximum cleaning fluid capacity: 90 liters – allows long, continuous operation without frequent refilling of cleaning agent. Pump flow rate of 2.7–3.6 l/min – ensures precise cleaning of hard-to-reach areas and surfaces with micro-cracks. Large 140-liter tank – enables cleaning of larger machine and equipment components. Closed-loop fluid circulation system – economical use of cleaning liquid, reduced waste, and a cleaner working environment. Automatically locking lid – ensures safe operation during cleaning processes. Ibodpjrh Ey Refx Abhsa Stable four-leg construction – provides optimal working height and safe operating conditions. Practical working shelf under the tank – convenient space for drying parts or storing tools. Design and technology The parts washer is equipped with a flexible hose with a spray nozzle, through which the cleaning fluid is delivered under pressure from the bottom of the tank. To ensure optimal performance, the pump inlet must remain completely submerged. The tank lid opens smoothly and locks automatically, increasing operator safety. The robust frame and four supporting legs provide excellent stability, even during intensive use. The well-thought-out design and compact dimensions (1130 x 540 x 885 mm) allow the unit to fit into most workshop spaces while providing a large working area for cleaning bigger components. Precision and cleaning efficiency The high-performance pump, with a flow rate of up to 3.6 liters per minute, combined with the closed-loop system, enables continuous and efficient operation with minimal fluid consumption. The cleaning solution penetrates even microscopic gaps, allowing thorough removal of contaminants from metal, cast iron, steel, and aluminum parts. The machine is designed for use with water-based detergents – cleaning effectiveness depends on the type and quality of the cleaning agent used. Applications The 140L parts cleaning cabinet washer is designed for professional applications in: automotive workshops, repair and maintenance services, mechanical workshops, manufacturing facilities. It is suitable for cleaning: machine parts, tools, engine components, hydraulic system elements, technical components requiring thorough cleaning before regeneration, repair, or assembly. Standard equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Working shelf underneath the tank Assembly and operating manual Technical specifications Parameter Value Tank capacity 140 L Maximum cleaning fluid volume 90 L Maximum pump capacity 2.7–3.6 l/min Power supply 230 V External dimensions 1130 x 540 x 885 mm Working tray dimensions 800 x 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP180 Pressure Cabinet Washer is an industrial cleaning device designed for washing heavily contaminated mechanical, metal, and industrial components. Thanks to pressure cleaning technology and a stainless steel construction, the machine provides high durability, efficiency, and safe operation even under demanding working conditions. The closed-loop system and the ability to heat the cleaning fluid up to 70°C enable effective removal of grease, oils, carbon deposits, and other stubborn contaminants. Main advantages of the MP180 washer Closed-loop system with heated cleaning fluid – improved removal of difficult contaminants at temperatures up to 70°C. Pressure up to 8 bar – effective cleaning of hard-to-reach areas and heavily contaminated components. High-quality stainless steel construction – corrosion and mechanical damage resistance, ideal for long-term industrial use. Two-function gun – allows selection between compressed air only or cleaning fluid mixed with air, also enabling component drying. Adjustable leveling feet – precise machine positioning even on uneven surfaces. Construction and technology The MP180 cabinet washer has been designed for maximum functionality in industrial environments. The design of the washing chamber and the integrated fluid heating system allows maintaining a constant cleaning temperature, significantly increasing washing efficiency. The pressure gun with an adjustable operating mode enables both cleaning and drying with compressed air. All components that come into contact with liquids are made of materials resistant to aggressive cleaning agents and chemicals. Precision and work efficiency Thanks to high cleaning pressure and elevated operating temperature, the MP180 pressure washer enables thorough removal of even stubborn contaminants from components with complex geometries. The operator has full control over the cleaning process – from adjusting the intensity of the spray stream to drying the cleaned parts. The 180-liter working chamber allows comfortable cleaning of medium-sized components without the need to disassemble them into smaller parts. Applications The MP180 pressure cabinet washer is suitable for: Automotive workshops, Industrial plants, Machinery service centers, Manufacturing facilities. Isdouc Tpyspfx Abheba It is ideal for cleaning: Engine components, Gearboxes and transmission parts, Valves, Pump housings, Hydraulic system components, Other metal parts requiring intensive cleaning. Thanks to its corrosion resistance and high durability, the machine is suitable for long-term operation in chemically demanding environments. Standard equipment Two-function gun (air / cleaning fluid + air) Cleaning fluid heating system Built-in 180-liter tank Stainless steel working chamber Adjustable leveling feet Technical specifications – MP180 pressure cabinet washer Parameter Specification Washer capacity 180 L Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun Ibsdovugwmepfx Abhoa The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes

Condition: used, Year of construction: 2019, total length: 4,200 mm, total width: 1,200 mm, total height: 2,450 mm, Colour: Black Weight: 600 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5025 CV - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes Ibedpfx Abezk Ia Djhja - Voltage [V]: 400 - Current consumption [A]: 6.6 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4200mm x 1200mm x 2450mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 350 h, overall weight: 2,359 kg, input voltage: 400 V, For sale is a high-quality, professional Just Laser core laser with 400W CO2 laser power. This machine is ideally suited for precise laser cutting and engraving in a wide variety of materials. The system is in very good condition and has seen little use due to its low operating hours (approx. 400 hours). It is ready for immediate use. The system features 2 cutting heads for the most precise results: 1. Standard laser head for cutting wood, MDF, HDF, plywood, solid wood, acrylic, leather, cardboard, many plastics, etc., and engraving wood, glass, leather, textiles, rubber, melamine, cardboard, acrylic, ceramics, and many plastics. 2. Metal cutting head with automatic height adjustment for steel, aluminum, copper, and brass. 3. K-Vision camera option Table size: 2540x1320 The system also includes: * 5 kW frequency-controlled extraction system * Activated carbon and cartridge filters * 5 kW Mark screw compressor Isdpfxjznbzve Abhoba Inspection is possible by appointment. Cutting thickness: up to 24 mm for wood, 3/4 mm for steel sheet. According to the manufacturer, it is the fastest large-area engraving machine on the market, with a speed of 3.8 m/s.