Used Universal Oven, Small And Medium Product for sale (28,236)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Blsdjfv Hphjpfx Af Reh Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Bedpfxsxqr D Te Af Rjlh

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Bodpeq Nx Alsfx Af Rolh Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: good (used), Year of construction: 2008, load capacity: 7,500 kg, Max. tool width: 3300mm Max tool height: 1630mm Table size: 1400x380mm / side Cas27Wn8Iy Load capacity: 15000 kg Turning load capacity: 7000 kg Bjdoup Aapopfx Af Rolh

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 2019-XXX, Model UR3 CB3 – year 2019 – used for exhibition (like new) – with original packaging Robot weight: 11 kg Bodpfx Afetw Ud Ds Rolh Payload: 3 kg Maximum reach: 50 cm IP rating: IP64 Average power consumption: 125W Repeatability: ± 0.01mm Linear speed: 1 m/s Power cable length: 6m Arm to control box cable length: 6m Teach Pendant (control tablet) cable length: 4.5m Price €10,900.00 (+VAT)

Condition: excellent (used), Year of construction: 2017, Model UR3 CB3 – year 2017 – used but in perfect working condition – with original packaging Robot weight: 11 kg Payload: 3 kg Maximum reach: 50 cm IP rating: IP64 Average power consumption: 125 W Repeatability: ± 0.01 mm Blsdpfx Afewx E Rrj Reh Linear speeds: 1 m/s Power cable length: 6 m Arm – Control box cable length: 6 m Teach Pendant (control tablet) cable length: 4.5 m Price: €8,500.00 (+VAT)

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Bledpog Atrvjfx Af Rjh

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. Bedpeq U Tctefx Af Rjlh • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A diesel jaw crusher PE250X400 with a screen typically refers to a mobile jaw crusher equipped with a diesel engine that can be used for primary crushing of various raw materials, and it includes a screening system for separating the crushed material into different sizes. Here are key features and information about such a configuration: 1. Diesel Engine: - The diesel engine provides the power for the jaw crusher, making it suitable for locations where electric power may not be readily available or practical. Diesel engines are known for their durability and reliability. 2. Jaw Crusher (PE250X400): - The "PE250X400" indicates the opening size of the jaw crusher in millimeters. In this case, the jaw crusher has an inlet opening of approximately 250mm x 400mm, allowing it to crush various materials with different sizes. 3. Screening System: - The inclusion of a screen allows the crushed material to be separated into different sizes based on particle size. This is particularly useful for producing various grades of final products. 4. Mobile Configuration: - A mobile jaw crusher with a diesel engine and screen is often mounted on a mobile chassis, making it easy to move from one location to another. This mobility is especially beneficial for applications in construction sites or quarry operations. 5. Material Handling: - The raw material is fed into the jaw crusher, where it is crushed by the reciprocating motion of the movable jaw against the fixed jaw. The crushed material then passes through the screen, and different-sized particles are discharged accordingly. 6. Adjustable Output Size: - The jaw crusher typically has an adjustable discharge setting, allowing operators to control the size of the final crushed material. 7. Applications: - Diesel jaw crushers with screens are commonly used in construction, mining, and quarrying applications for processing various materials such as concrete, gravel, rock, and other aggregates. 8. Maintenance and Operation: - Regular maintenance of the diesel engine, jaw crusher components, and the screen is necessary to ensure optimal performance and longevity. Bedpfx Afsq Nfu Es Relh 9. Fuel Efficiency: - Diesel engines are generally known for their fuel efficiency, making them suitable for applications where a reliable power source is required without access to electrical grids. When considering a diesel jaw crusher with a screen, it's important to evaluate factors such as the required capacity, material hardness, and the desired final product specifications. Additionally, choose a reputable manufacturer known for producing reliable and high-quality mobile crushing and screening equipment.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Bedjq Ngb Dopfx Af Relh Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Blodpfxey Ur Hlo Af Rjh Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm Bledpsy Szq Uofx Af Rsh B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe

Condition: ready for operation (used), Year of construction: 2001, operating hours: 44,134 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: HEIDENHAIN TNC426/430, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,150 mm Travel range, Y-axis: 710 mm Travel range, Z-axis: 710 mm Blodpfxjy Uk Hwe Af Rsh Spindle speed, max.: 12,000 rpm Table dimensions: 1,500 x 800 mm Table load capacity: 1,100 kg C-axis: 0 - 360° Tool interface: SK40 Number of tool magazine positions: 32 MACHINE DETAILS Operating hours: 44,143 h Control system: HEIDENHAIN TNC426/430 Total connected load: 62 kVA Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,800 x 3,000 mm Machine weight: 9,700 kg EQUIPMENT Coolant system NC rotary table mounted on the machine table Chip conveyor Electric handwheel Manuals / Documentation

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Bjdpjyf Ncqofx Af Rslh Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Blsdpexd D I Rofx Af Rjh

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm Bljdpfx Afexlkw Us Rjh z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: used, Motor output 3 kW Bjdpfx Afev Nq Ske Rjlh total power requirement 3 kw Weight 1.400 kg

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Model - DCG. Serial no. - 180919. Date of manufacture - 2018. Speed - 36 r/min. Blsdpfx Afsza T Slo Roh Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Bsdpfsza T I Hsx Af Rslh Will need guarding to meet CE spec.

Condition: used, Year of construction: 2021, REF: MM6437 1 x Seveo Fluss 2x cyclised pump for Intamac filler, with shut-out valves. Mounted on stainless-steel frame. Model - VM1000B. Serial no. - 2450. Date of manufacture - 2021. Bodpfx Aeza Txxef Relh Overall dimensions - 1130mm long x 450mm wide x 800mm high.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). Bsdpfx Afjx Dbkce Rjlh ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Year of construction: 2019, REF: MM6442 Zhangjiagang Angel Beverage Machinery Co. Ltd (Chinese) aluminium can seaming machine for 200mm diameter cans. Model - FXZ-1. Serial no. - Angel201906. Date of manufacture - 2019. Speed - 1000 cans/h. 82mm wide belt. Overall dimensions - 3000mm L x 1040mm W x 2000mm H. Condition - Good, Trial works only.  Blodpfjza E N Nox Af Rjh CE marked/approved.

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Model - MIN.FM.Servo. Serial no. - 62006122. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high. Bljdpfx Ajza Eyusf Roh

Condition: used, Year of construction: 2019, REF: MM6433 Zhangjiagang Beverage Machinery Co. Ltd (Chinese) single-head screw cap capping machine. Bsdpfeza Ekgsx Af Rslh Model - FXJ-1. Serial number - ANGEL201909. Date of manufacture - 2019. Capacity - up to 1,500 bottles / hour. Belt width - 82mm. Electrical requirements - 380 V / 509 hz / 3 phase. Overall dimensions - 3000mm long x 900mm wide x 1910mm high.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A complete weighing and bagging system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. 1 x Gainsborough Engineering Ltd GV2K1 vertical form, fill and seal bagging machine. Serial number – GV081395. Date of manufacture - 2008. Sealing bars: Horizontal - 250mm long. Vertical - 250mm long. Bag size range: Minimum - 50mm x 50mm. Maximum - 200mm x 200mm. Output / Speed - up to 70 packs/minute depending on pack dimensions. Electrical requirements - 230 V / 50 hz /1 phase. Power - 13 Amps. 2 x Markem Imaje SmartDate 5 thermal transfer printers (1 x 53mm and 1 x 128mm). Bljdpfx Afezaw Nuo Rjh 1 x Gainsborough Engineering Ltd outfeed inclined conveyor. Belt dimensions - 2000mm long x 285mm wide. Height adjustable outfeed height (max. height 1100mm). Overall footprint of system (in current setup) - 3.7m long x 3.5m wide x 3.4m high.