Used Vötsch Klimaprüfschrank Vc³ 4018-M -40°C Bis +180°C for sale (100,923)

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor, serial number: MAC115-04930, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rsdji D Irhjpfx Ankscd

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h Rsdpfx Aszk Anponkecd 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Rcedpfxozizgho Ankod - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller Rcjdpfxjzizdys Anked - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2019, condition: excellent (used), SEMA-Maschinenbau Type MT-40-C Technology Drilling Year of manufacture: 2019 Control Unit Technical Specifications Control System - CNC control: SIEMENS 840 D SL Dimensions & Weight - Space required (left/right): 13,480 mm - Space required (front/rear): 10,502 mm - Total height: 4,532 mm - Total weight: approx. 23,000 kg Rcjdpfxjwf R N He Ankjd Electrical connection data - Power consumption (total): 210 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Basic machine with 11 stations 1. Station 1: Component loading with multi-axis handling. 2. Station 2: Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling (IKZ), max. speed 15,000 rpm. 3. Station 3: Crown turret *Sauter 112* (3 spindle units, HSK 40) with external cooling. - Additionally: 1 × 2-axis unit *SEMA AE2-35/50/NC*. 4. Station 4: 1 × SE-HSK 50C spindle unit with internal cooling, max. speed 15,000 rpm. 5. Station 5: 1 × Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling. 6. Station 6: 1 × Sauter 112 crown turret (3 spindle units, HSK 40) with internal coolant. - Additionally: 1 × SEMA AE1-35/50/NC 2-axis unit. 7. Station 7: Hydraulic docking unit including C-axis positioning unit. - Equipment: 7 × SEMA AE1-35/50/NC 2-axis units. 8. Station 8: Hydraulic docking unit including C-axis positioning. - Additionally: 1 × permanently integrated angle head. 9. Station 9: 1 × SEMA AE3-35/50/NC 2-axis unit. 10. Station 10: Permanently integrated angle head *Benz S-35/50/NC*. 11. Station 11: Cleaning unit for blowing off (inside/outside). --- Notes on structuring: - The information is grouped thematically (control, dimensions, electrical system, stations). - Technical details such as spindle types, cooling, and speeds have been listed precisely. - Models and manufacturers (Sauter, SEMA, Benz) are highlighted. - Stations 7 and 8 have been more clearly separated to avoid confusion. - Consistent formatting for better readability. Do you need further adjustments? 😊 Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Availability date 05/2025 Weight 23 t

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-320-C-PPVA -Stroke travel: 320 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Hole: Ø 12 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 580/55/H130 mm Rodpfxoxwkvuj Ankocd -Weight: 2.6 kg/pc.

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm -Hole: Ø 14 mm Rcjdjw U Ty Eopfx Ankjd -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Drive rings: for attachment milling mandrel, 19 pieces -Type: Ø 13 to 40 mm -Quantity/Size: see photos / parts list -Submission/Price: complete -Transport dimensions: 200/120/H80 mm -Total weight: 4.4 kg Rsdpfxezhkxko Ankjcd

Year of construction: 2017, condition: ready for operation (used), A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible. Rsdpfx Aozidkvjnkjcd

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Rodezgtvvspfx Ankjcd

Condition: used, mileage: 8,405 km, power: 243 kW (330.39 HP), first registration: 06/1995, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, color: yellow, gearing type: mechanical, number of gears: 16, emission class: euro1, suspension: steel, total width: 2,500 mm, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 1,200 mm, Year of construction: 1995, Equipment: crane, Daf CF 85.330 Original Dutch truck from first owner! Only 8,400 km! 6x2 / 10 tyres Full leaf spring suspension. 16-speed manual gearbox. Rsdpfx Aeyrh Tujnkscd Crane: Ferrari 940. A5 4x hydraulic outriggers. 5x hydraulic boom extensions. Radio remote control. Capacity: 2.65 m - 13,700 kg 4.47 m - 8,300 kg 6.37 m - 5,700 kg 8.34 m - 4,100 kg 10.45 m - 3,050 kg 12.65 m - 2,300 kg 14.65 m - 1,800 kg = Further Information = Technical Information: Number of cylinders: 6 Axle Configuration: Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tyre size: 295/80R22.5; Steering; Tread depth left: 75%; Tread depth right: 75% Rear axle 1: Twin tyres; Tread depth left inner: 50%; Tread depth left outer: 50%; Tread depth right inner: 50%; Tread depth right outer: 50% Rear axle 2: Tyre size: 295/80R22.5; Twin tyres; Tread depth left inner: 40%; Tread depth left outer: 40%; Tread depth right inner: 40%; Tread depth right outer: 40% Weights: Unladen weight: 17,460 kg Payload: 8,540 kg Gross vehicle weight: 26,000 kg Functional: Crane: Ferrari Identification: Model number: CF 85.330 ATI / 40 t/m CRANE / K = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive to provide accurate information, but no rights can be derived from the provided text.

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex drill bits, drill bit holders -Manufacturer: Sassex, spiral drill bits, 33 pieces -Type: E16 / E17 Ø 40 to 128 mm Rjdpfxszg Emae Ankjcd -Submission/Price: complete -Mounting bracket: available in stock for an additional charge -Transport dimensions: 530/340/H50 mm -Weight: 15 kg

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BR 40/25 C Bp Pack Scrubber Redpfx Anoytplbjkocd NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER 400mm cleaning head equipped with new medium-hard cylindrical brushes for work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER NEW 400mm PPL0.5 cylindrical brushes NEW suction hose NEW drain hose Suction bar with new rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25 liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 9,325 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, ## Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction (basic lightweight design) * Patented curved front end design * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate, including thrust compensations * Spare wheel carrier for 1 spare wheel including mounting kit * Spare wheel matching the original tyres, mounted on steel rim Rcedpfxjzhgp So Ankjd * Lockable plastic toolbox with drawer and shelf insert (650 × 520 × 670 mm, W × H × D) * Tarpaulin support bar with holder * Rear towing hooks ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Off-road axle specification * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded piping for easy maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front * EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * White LED front position lights (2 units) * White/red LED rear outline marker lights (2 units) * 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables) * Additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Aluminium Box Body (40 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed for improved material discharge resistance * Internal access ladder at front wall * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Rear Door System * “Membrane” tailgate design * Pendulum rear door with double-joint hinge system * Externally mounted with double hook locking system * Rubber-sealed tailgate * Central grain slide gate ### Floor & Equipment * Continuous 6 mm aluminium floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction)

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Manufacturer: GSD Redjzgx A Ispfx Ankscd Tank rotating device for welding pipes and tanks Year of manufacture: 2012 Load capacity of the rotating device: 40 tons Rotation speed: 0 to 3.2 m/min Tank diameter: 500 - 7000 mm Roller spacing: 200 to 1750 mm Roller center distance: 600 to 2150 mm Roller diameter: 400 mm Roller width: 480 mm Motor power: 2 x 1.5 kW Mains connection: 400 volts, 50 Hz - Variable speed control via SEW frequency inverter - Cable remote control - Clockwise and counterclockwise rotation - Both roller pairs are driven - Rollers with 5 rubber tires each - Manual adjustment of the roller spacing via trapezoidal screw spindle - Railcar DEMAG, steel castors with smooth roller surface (without drive) Space requirement L x W x H: 4000 x 1850 x 1150 mm Own weight: 4.5 t Good condition

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS Rodpeuhantsfx Ankscd - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: used, functionality: fully functional, machine/vehicle number: 2185, empty load weight: 6,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2011, next inspection (TÜV): 02/2027, loading space volume: 40 m³, suspension: air, tire size: 385/65/22.5, wheelbase: 1,310 mm, color: silver, trailer brake: trailer braked, Year of construction: 2011, Equipment: ABS, Schmitz aluminum body with steel chassis, 40 m³, lift axle, roll tarp, platform, folding underrun guard, Schmitz axles with disc brakes, Quicksilver plastic wear-resistant floor, rear door in 11/25, grain slide, German-made semi-trailer. Sold only to commercial businesses and with exclusion of any warranty. Rsdpozdb Icofx Ankecd We deliver to any German seaport.

Condition: ready for operation (used), Indramat MAC112D-1-ED-4-C/180-A-0/WI517LV/S011 Permanent Magnet Motor, serial number: MAC112-99152, used, normal signs of wear, 100% functional. Scope of supply as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Rodpfx Anji D Iq Dekscd

Condition: used, mileage: 224,805 km, power: 330 kW (448.67 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 13,050 kg, maximum load weight: 12,950 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,800 mm, next inspection (TÜV): 09/2026, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 7,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, high roof, 1x comfort seat, 1x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, auxiliary heater, air horn, switch 16, ABS (anti-lock braking system), traction control (ASR), PTO, differential lock, work lights, revolving beacon, storage box, leaf suspension, towing device air-light-hydraulic, aluminum tank, underrun protection, side aluminum guard, hydraulic cross lock, roof hatch, green environmental badge. Rcedpfx Anjyw Trujked Wheelbase: 4800 mm Body: 18t Hiab hook lift system XR18S59 up to 7 m container (extendable underrun protection). 8t front axle, disc brakes on front and rear axles, PTO NA MB 124-10c, MPA, N-/M-speed, used and new containers available at additional cost! Roll height approx. 1390 mm! ACCESSORIES DATA WITHOUT GUARANTEE, subject to change, prior sale, and error!

Condition: used, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2023, suspension: air, tire size: 385/55R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, ABS (anti-lock braking system), container locking mechanism, side aluminum mudguards, storage box. Body: Sliding trailer for roll-off containers from 5 m to 7.00 m, 2x 9t BPW axles, disc brakes, tool box, like-new condition. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Rodpfx Ajy U Ifkonkocd

Condition: used, empty load weight: 3,180 kg, maximum load weight: 14,820 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2012, loading space length: 7,000 mm, loading space width: 2,450 mm, total length: 2,550 mm, total width: 1,400 mm, total height: 98,500 mm, suspension: air, tire size: 385/55 R 22,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum rims, 2 axles, SAF axles, air suspension, ABS (anti-lock braking system), container locking mechanism, storage box. Body: Roll-off trailer for containers up to 7 m in length, roll-off trailer for containers up to 7 m, disc brakes, pneumatic internal container locking mechanism. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Rjdpfei Rpgxsx Ankscd

Condition: used, empty load weight: 3,640 kg, maximum load weight: 14,360 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2005, loading space length: 7,000 mm, total length: 2,550 mm, total width: 1,280 mm, suspension: air, tire size: 385/55R22,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, work lights, 2 axles, SCB axles (disc brakes), turntable, air suspension, ABS (anti-lock braking system), container locking mechanism, sliding bed, side aluminum fender, storage box. Rsdpoi Rlt Djfx Ankecd Superstructure: 2-axle sliding bed semi-trailer for containers up to 7m, 2x 9t SCB axles, disc brakes, 2x pneumatic container locking mechanisms! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm Accessories: see photos Rsdezbirkepfx Ankocd -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: like new (used), Estimated stock level: approx. 840 pieces. We are offering a second-choice structural brace from the manufacturer SSI Schäfer for sale. Technical data for the structural brace: Shelving system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Structural brace, second choice Rcjdpfxoh Eg Ago Anksd Material color: Sendzimir galvanized Overall length: approx. 1,270.0 mm Center-to-center hole distance: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.35 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), We are offering a second-choice structural support beam from the manufacturer SSI Schäfer for sale. Technical data for the structural support beam: Shelf system: SSI Schäfer Redpoh Eg Anjfx Ankscd Type: PR 600 Included in the scope of delivery: 1x Structural support beam, second choice Material color: Sendzimir galvanized Overall length: approx. 1,208.8 mm Center-to-center hole distance: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.