Used Vertical Grinder Baudin for sale (8,500)

Condition: used, Year of construction: 2003, chucking diameter 250 mm workpiece dia. 140 mm workpiece length - max. 700 mm Feed diameter 250 mm Workpiece diameter max. 140 mm Workpiece length max. 700 mm Djdpjydfpksfx Akhowa Main spindle power (40% duty cycle) 38 kW Main spindle speed max. 4,000 rpm Rapid traverse speed X / Z 30 / 40 m/min Tool carrier 3 x disc turret with up to 11 driven tools each, or end machining turret

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA Control Siemens Sinumerik 840D weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Dwodpfjyan R Nex Akhsa Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2014, turning diameter 160 mm swing diameter 210 mm turning length 210 mm Control Siemens Sinumeric 840 D total power requirement 34/26,5 kW weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113 Dwsdsyan Riepfx Akhsa

Condition: used, Year of construction: 2007, x-travel 660 mm y-travel 350 mm z-travel 450 mm Control Ultimax Dodpfxszrh Rls Akhswa In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine is operational. The X-axis ball screw is making noise and should be replaced soon. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Djdpfx Akszrbz Rshewa Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 760 mm, Available for immediate pickup from our location: Vertical machining center ZPS Depo Type MCTV 1060 NT Year of manufacture 1998 Heidenhain iTNC 426 M Table 1270 x 590 mm Travel distances X/Y/Z 1016/610/760 mm SK 50 Spindle speeds up to 8000 rpm Table load max. 900 kg Drive power 11 kW Tool changer, 24-position Dsdpfx Akezrbzkehewa Distance spindle – table 80 – 840 mm Weight 6700 kg Price: Euro 6,500.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Dwedezru Rfepfx Akhja Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. Dsdpfx Akey T Hbzjhjwa - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours - Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Dwedpfx Asztb Imjkhja Mains voltage: 400 V Mains frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant/air blast switching Coolant spray gun Heidenhain TS 649 measuring probe

Year of construction: 1995, condition: ready for operation (used), A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement. Dodpfxjzrn Nnj Akhswa

Year of construction: 1983, condition: ready for operation (used), A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment. Dwsdpfx Aozrn Nhokhea

Condition: ready for operation (used), Year of construction: 2010, X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Dwedpjzrn Iwofx Akhsa

Year of construction: 1981, condition: ready for operation (used), A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible. Djdjzrn Nbjpfx Akhowa

Condition: ready for operation (used), Year of construction: 1998, Saacke UWIC Dedpfx Ajzrz I Dekhswa

Condition: used, Year of construction: 2009, turning height: 3,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 3,400 mm, faceplate diameter: 2,950 mm, workpiece diameter (max.): 3,300 mm, VERTICAL LATHE SCHIESS CNC FAGOR 8070 (C-AXIS + LIVE TOOLING) TECHNICAL SPECIFICATIONS Brand: Schiess Model: TVMF 320-3000 Year: 2009 Maximum turning diameter: 3400 mm Maximum turning height: 2580 mm Load capacity: 20 t C-axis (0.001°) CNC: Fagor 8070 (70 kW) Table diameter: 2950 mm Distance between columns: 3300 mm Angular milling head Dwodoxh Hmkspfx Akhsa PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Schneeberger Corvus GDS Dwsdjzrz Iqepfx Akhoa

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: DMG Mori Ecomill 1100 V Control: Siemens 840 Dsl -Operate Year: 2016 SPECIFICATIONS Travel X-Axis: 1.100 mm Y-Axis: 560 mm Z-Axis: 510 mm Rapid motion: (X/Y/Z): 36 / 36 / 30 m/min. Spindle speeds: 12.000 rpm Spindle motor: 13 kW Torque: 82 Nm Tool: SK 40 Toolchanger Tool capacity: 24 Table size: 1.400 x 560 mm Dwjdpfx Ajzrm H Sokhja Max. Table Load: 1.000 kg Equipment Chip conveyor Cooling pumps Internal cooling: 17 Prod. Pack 1 bar

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, total width: 550 mm, total length: 460 mm, total height: 490 mm, input voltage: 230 V, grinding wheel diameter: 100 mm, overall weight: 51 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.375 kW (0.51 HP), spindle speed (max.): 5,300 rpm, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Dwjdsq E Ry Hspfx Akhja Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2011245, grinding length: 470 mm, grinding width: 165 mm, total height: 1,950 mm, total length: 1,350 mm, total width: 1,110 mm, distance table to spindle center: 450 mm, table length: 460 mm, type of input current: three-phase, table width: 150 mm, overall weight: 720 kg, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, power: 2 kW (2.72 HP), input voltage: 400 V, disc diameter: 200 mm, Equipment: documentation/manual, ROGI surface grinder, 400V-3-phase includes: Magnetic chuck Dsdpok Iubvofx Akhjwa 2-axis digital readout system Grinding wheel flange Grinding wheel Balancing device Cooling system LED work light Toolbox

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, grinding belt speed: 33,000 mm/s, total height: 1,000 mm, total length: 940 mm, total width: 435 mm, overall weight: 110 kg, grinding width: 75 mm, warranty duration: 12 months, WBG75 - ROGI belt sander, 400V - 3 Phase Sanding belt ----- 75 x 2000 mm Belt speed ----- 33 m/s Motor ----- 3 kW Weight ----- 110 kg Dsdpfega T Aysx Akhjwa INCLUDES * Robust base frame * Sanding belt

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 68, Equipment: cooling unit, documentation/manual, MIKRON HSM 400 U vertical machining center, equipped with HEIDENHAIN TNC 530, manufactured in 2007. Gantry structure. Table equipped with EROWA ITS 148 receiver. Travel: X 400, Y 240, Z 350, B +110°/-110°, C 360°. Feed rate: X, Y, Z 40 m/min. Table load: up to 25 kg. Electromandrel head, 42,000 rpm, 12/13 kW, HSK E40. X, Y, Z linear scales. Chip extractor. Dwedpfxjzru Ide Akhoa Head coolant unit. 68-tool changer. Machine weight: 7,000 kg.

Condition: used, machine/vehicle number: MC939B03, overall weight: 5,800 kg, input voltage: 400 V, type of input current: three-phase, Vertical Machining Center. Manufacturer: Falcon Machine Tools Co., Ltd. (Chevalier, Taiwan) Djdpfxjztba Nj Akhowa Model: 2040VMC Serial Number: MC939B03 Type: CNC Vertical Machining Center Machine Weight: 5,800 kg Maximum Spindle Speed: 8,000 rpm Power Supply: 400 V Required Power: 15 kVA Air Pressure Required: 5 kg/cm²

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Dedpfx Akszr Uq Sohewa Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Condition: not inspected (used), Type: DO 25 - 0.55 kW - 2,800 rpm Dsdpfx Akjza Dk Ejhewa - 220/380 V

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle running hours. The machine can be connected and tested on-site. Djdpfx Akezr Rugehowa