Used Vffs Bagging System for sale (44,854)

Condition: new, Bolt-together shelving system H2500xB1000xT400mm, base unit with 6 steel shelves, load capacity 150 kg, galvanized/gentian blue, RAL 7035, SCHULTE · Fully bolt-together, quick-assembly shelving system in modular design · Sturdy, disassembled T-profile frame, with bolt-together connecting plates, powder-coated Field load: 1700 kg Design: Base unit Features: Steel shelves Number of shelves: 6 Surface: Galvanized/gentian blue, RAL 7035 Height: 2500 mm Load capacity per shelf: 150 kg Depth: 400 mm Width: 1000 mm Pgsdo Ac Sqhspfx Ai Tju

Condition: new, Overfill protection for tank systems, 400-1500 liters, electrical, with alarm system · Approved according to WHG § 19 for new and used oil · The overfill protection has an integrated alarm and acknowledgment system Pgedpfxs Actuzo Ai Tju · Alarm via the signal light and the alarm buzzer · Acknowledge suitable for: new and used oil compatible with: tank systems 400-1500 liters design: electronic with alarm system

Condition: new, Storage system platform, add-on module, H2500 x W4000 x D4000 mm, load capacity 400 kg/m² · System platforms make optimal use of existing space. This reduces costs and improves logistical processes. The platforms can be expanded at any time due to their modular design. Height: 2500 mm Width: 4000 mm Depth: 4000 mm Pgjdo Ac Niujpfx Ai Tju Load capacity: 400 kg/m² Design: Add-on module

Condition: new, Storage system platform, add-on module, H2500 x W4000 x D4000 mm, load capacity 750 kg/m² · System platforms make optimal use of existing space. This reduces costs and improves logistical processes. Due to their modular design, the platforms can be expanded at any time. Load capacity: 750 kg/m² Height: 2500 mm Depth: 4000 mm Design: Add-on module Width: 4000 mm Pgjdpfx As Ac Nizei Tsu

Year of construction: 2024, condition: good (used), The energy storage system was purchased in 2024 and is being sold due to business closure. The energy storage system consists of: Pgodpfe Ab Aryjx Ai Teu 6 batteries, maximum storage capacity of 200 kWh, maximum output power of 75 kW (3 x 25 kW), maximum input power of 75 kW (3 x 25 kW). The system is permanently installed in a 10-foot container. An inspection can be arranged by appointment. Important: The storage container was professionally dismantled by the previous operator and is now stored at our facility.

Condition: new, 100 cm wide x 170 cm high, galvanized. Pgedpo Acbtfjfx Ai Tju

Condition: new, All five surfaces (4 side panels + bottom) consist of sturdy mesh to provide ventilation for the firewood. Pede Acbtlspfx Ai Tsgu At the corners of the top side, there are 4x2 retaining loops (two small and two large) for lifting. On the underside, there is one loop at two corners for tipping the big bag.

Condition: new, All five surfaces (4 side panels + bottom) are made of robust mesh to ensure ventilation of the firewood. Pgjdpfxe Acbtxe Ai Tju At the corners of the top surface, there are 4x2 retaining loops (two small and two large) for lifting, and on the underside, there is a closable opening in the bottom for emptying the big bag.

Condition: new, Plastic bag, 100 l, HD-PE, blue, 20 µm, W800 x L1000 mm, 500 pcs/carton · Made of polyethylene (PE) · The LD-PE material is produced from recycled PE · HD-PE and LD-PE behave in a completely groundwater-neutral manner in landfills · No harmful substances are released during incineration Pieces per roll: 50 Capacity: 100 l Psdpfx Ae Acaixoi Tjgu Thickness: 20 µm Color: blue Material: HD-PE Pieces per carton: 500 pcs Width: 800 mm Length: 1000 mm

Condition: new, Plastic bag, 148 liters, PE, transparent, WxL mm, 100 pieces/carton, HSM * Packaging unit = 100 pieces * Further technical features: Design: with side gussets * Contents per carton: 100 pieces * Suitable for: Shredders Pjdpfx Ais Acglaj Tsgu Design: with side gussets Suitable for: Shredders Capacity: 148 liters Material: PE Contents per carton: 100 pieces Color: transparent

Condition: new, Premium diesel tank system, 1000 liters, H1800 x W1200 x L800 mm, with pump and dispensing nozzle, CEMO Pedps Acracjfx Ai Tsgu * Complete with 230 V electric pump and automatic dispensing nozzle with nozzle holder * Integrated hose reel with 8 m filling hose * Counter K33 * Filter with water separator Width: 1200 mm Length: 800 mm Capacity: 1000 l Features: with pump and dispensing nozzle Height: 1800 mm Weight: 170 kg Flow rate: 56 l/min

Condition: new, mechanical quick-change device for heavy-duty vehicles. Psdpfxo Abnumj Ai Tegu

Condition: new, Spray nozzle, GEKA plus system, Geka 13mm, KARASTO · Heavy-duty design · Brass · Conical, metal-sealing · O-ring NBR between the spray nozzle and stuffing box · With GEKA plus connection Pgjdpfo Abxcuex Ai Tju Nominal size mm: 13 mm Design: Heavy-duty design Type: GEKA plus system Diameter: 7 mm Nominal size: 1/2"

Condition: new, Tool bag B510xT230xH400mm, 33L, cowhide, PARAT · Made of cowhide · Black · Front and rear panels partially foldable · Handle with padded grip recesses and a sturdy metal handle rail · Bottom glides · Fixed center panel with flexible CP-7 attachment system (allows individual arrangement of tools up to 26 mm in diameter) · Lockable snap closures, ring caps, handle hole Special product benefits: Side panels and base shell made of extremely durable, moisture-resistant, double-walled HDPE plastic · Other technical features: Width: 510mm · Depth: 230mm Pedpe Ab Hcvsfx Ai Tjgu · Height: 400mm Internal depth: 210 mm Material: Cowhide Internal width: 460 mm Internal height: 340 mm

Condition: new, Tool bag B460xW210xH340mm, 33l, cowhide/HDPE, PARAT · Made of cowhide / HDPE · Black · Tool bag body reinforced with aluminum corners · Front and back walls partially foldable · With 9 or 11 fixed loops · Fixed center wall with 19 fixed loops Pedpfxe Ab Hc As Ai Tegu · Side walls with 4 loops · Carrying loop for spirit level under handle · Front pocket · Sturdy handle · Base shell · Lockable PARAT snap locks · 2 fastening straps · Ring caps for attaching a carrying strap (not included) Special product advantages: Side walls and base made of double-walled HDPE plastic, making them extremely robust and more resistant to moisture. · Other technical features: Width: 460mm Depth: 210mm Height: 340mm Internal depth: 210 mm Internal height: 340 mm Material: Cowhide/HDPE Internal width: 460 mm

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Pgodpfxezrtylo Ai Tou Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Applicable to models: 130 - 285; 245; 255; 263; 363; 363S; 174; 373; Blizzard 65 Landini Pgsdpfxs Abh Rze Ai Tsu Packaging quantity: 1 Packaging unit: piece

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Pgjdpfxezdy Iaj Ai Tju Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. Psdpfx Ajzd Uubsi Tjgu The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Horiba Psdpozdy Rnofx Ai Tegu Type: Mexa 7100D Horiba exhaust gas system Mexa 7100D Including JAG-10-000-061 cylinder cart, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems Modal analysis (dynamic or transient analysis) during non-stationary operating conditions Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 kg Year of manufacture 2016 Collection from our location Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Pgedpezd Rvzofx Ai Tou Power amplifier TGA 1500 Technical data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Eos EOSINT Here, we offer an Eos EOSINT plastic laser sintering system. Pjdpszdyxlsfx Ai Tegu The following items are included with the EOS P380 system: Build chamber Powder container Overflow container 3DM 8-zone process chamber heating, 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg EOSINT P 380 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, LDS LDS V790-335T Air-Cooled Vibrator with HPA-K CE power amplifier, m+p VibPilot-8, and PC system For sale is a used electrodynamic vibration testing system from Ling Dynamic Systems (LDS). The system is suitable for vibration testing, vibration analysis, environmental simulations, research & development, quality assurance, and industrial load testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker model: V790-335T Podpfsy Uigcsx Ai Tsgu Type: Air-Cooled Vibrator Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sinusoidal force: approx. 6.67 kN peak Random force: approx. 6.67 kN RMS Shock force: approx. 26.69 kN peak Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar (80 psi) Optional air isolation approx. 5.52 bar (80 psi) Power amplifier: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting: 400 V Maximum connected load: 9.3 kVA Control / Measurement system: The scope of delivery includes a complete PC workstation with monitor, keyboard, and mouse, as well as m+p international VibPilot-8 measurement and control hardware. Installed software: m+p international VibControl VibRunner Version 2.13.27.7 VibMultiPlot Version 2.13.27.7 GraphPad The combination of LDS shaker, HPA-K power amplifier, m+p VibPilot-8 controller, and PC workstation forms a professional system for vibration and shock testing and applications in research, development, and quality assurance. Equipment: LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE power amplifier m+p VibPilot-8 measurement and control unit PC workstation Monitor Keyboard and mouse Connection cables and accessories as shown in the pictures Condition: Used. Normal signs of wear and storage are present. Optical condition see pictures. Scope of delivery: Scope of delivery as shown in the pictures. All components visible in the pictures and explicitly mentioned are included in the scope of delivery. Transport: Due to its size and weight, collection or shipping via a freight forwarder is recommended. An inspection by appointment is possible. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) Psdpfx Aozix Nmji Tegu We will be happy to answer any further questions you may have by telephone.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: Pjdozgr I Ropfx Ai Togu The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.