Used Vibrochimica Vbts 651/4 for sale (58,658)

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany Ljdpfx Amsguk Dkomohh - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Lhjdefdkbhspfx Ammeh Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Lhodpeguk Dvjfx Ammeh Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; Ljdpfjv Ukz Aex Ammohh except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Lhjdeurf Twspfx Ammeh Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Lhedpfx Amswq Sv Ejmsh Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Lodpjyr Nd Uofx Ammohh

Condition: good (used), KSB Pump Etaline GN 065 - 160/114 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air-conditioning systems Cooling circuits Domestic hot water systems water supply industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data 1450 min Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Lsdpfjivd Dkex Ammohh Drive surface-cooled three-phase standard motor with motor-mounted frequency converter and radio interference filter according to DIN EN Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 65 Nominal width suction/ discharge 160 Item condition: used

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Lodsxhdthopfx Ammehh Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m Lhodpfsyf Un Sjx Ammoh 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Brake system Mercedes-Benz Arocs 2651 L 6x4 Short Timber Transporter Lhedpfxoyfrqqs Ammsh Loading crane: Palfinger Epsilon TZ 12-98, EBERT short timber body, approx. 6,750 mm between bulkhead and crane, A1D front axle 8.0 t, A1Y front axle, straight execution, A2F rear axle, crown wheel 233, planetary, 13.4 t, A5P axle ratio i = 3.714, B1B electronic braking system with ABS and ASR, B2A disc brakes on front and rear axles, B2D disc brakes with partial protection, B2X parking brake, electronic, B2Z parking brake additionally on front axle, B3K secondary oil retarder, B4A condensation monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, C2R wheelbase 4800 mm, C4L rear overhang 2550 mm, C6Q stabilizer, front axle, D0S compressed air connection in cab, D1C driver's air suspension comfort seat, D1N passenger function seat, D2N seat backrest release, driver's seat, D2Y seat belt check, D3B comfort bed, lower, D3Q seat upholstery velour, D4T curtain across bed(s), D4Y sun blind, side, driver’s side, D5Y rubber mats, driver and passenger side, D6F air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater, cab, D7A additional thermal insulation, D7G storage compartment covers, driver and passenger side, D7J drawers under bed, D7K drawer under balustrade, D7R storage lids above windscreen, D7Y luggage shelf, upper, at rear wall, D8N electric roof hatch, D8X low seat box, 40 mm lowered, E0D battery sensor, Hella make, E0F Exide batteries, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1M alternator 28 V/150 A, E3M socket 24 V/15 A behind seat, E3R power socket 24 V/25 A, passenger footwell, E3W PSM 2nd generation, E4C additional functions for body builders, E5H night driving light switch, E5K MirrorCam switch at bed, E6A trailer socket 24 V, 15-pin, E7F cable remote control for air suspension, E9G pre-installation for electrical devices, F0F side module, N3 vehicle, F1E L-cab StreamSpace, 2.30 m, 170 mm tunnel, F5L exterior sun visor, transparent, F5Y A-pillar trim, F6D tinted windscreen with band filter, F6I heated front mirror, F6Q air horn, F6T MirrorCam, F6V MirrorCam chrome holder, lower cover cab color, F7B bumper, corners made of steel, F7D bumper, center part with towing eyes, coupling jaw, F7Y cab entry left/right, movable, F8E central locking system, F8F comfort locking, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0T Predictive Powertrain Control, G2F gearbox G 330-12/11.63-0.77, G5A single plate clutch, G5G Mercedes PowerShift 3, G5L PowerShift Advanced, I2H tubeless tires 315/80 R 22.5 RA, I2P tubeless tires 385/65 R 22.5 FA/FLS/NLA, I4I axle configuration 6x4, I5F 26.0 tonner, I6I vehicle production plant Wörth, I6X air suspension, rear axle, J1M digital tachograph, 2nd generation, Version 2, ADR, J1S tachograph manufacturer VDO, J2G digital radio, J2K speakers 2-way system, J2U navigation system, J3U requirement Fleetboard Manager App, J3V Truck Data Center 7, J3Z axle load measurement system, J6C Multimedia Cockpit, interactive, J6Y Remote Online, J6Z pre-installation Mercedes-Benz Truck App Portal, J8H omission of rear-view camera, towing vehicle end, J8Y pre-installation for Truck Data Center 7, J9A pre-installation CB radio, 12 V, DIN slot, J9D pre-installation for toll recording, J9P pre-installation and display for up to 4 cameras, K1M tank 510 l, left, 650 x 700 x 1300...

Condition: used, mileage: 490 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone at ...). Mercedes-Benz Arocs 2651 L 6x4 short timber transporter. SCHEMEL SHORT TIMBER BODY, Manufacturer: EBERT, Dimensions: approx. 6,750 mm between headboard and crane. 4 EXTE stanchions D6 – adjustable with clamp fastening and lashing ratchets, or counterholders for load securing. 8 EXTE stanchions D5 – telescopic. Special Z-profile subframe, 200 mm high, closed in the center section with chequer plate. Welded headboard construction with internal special aluminum profiles, approx. 2,600 mm high. 4-piece folding and telescopic tarpaulin cover, designed for timber transport. Hose chains and supply lines of the highest quality, with access ladder for easier ascent. Installation of side marker lights, access to crane, dual compressed air couplings, covers for battery box and air tanks on both sides with aluminum tread plate. Electric and hydraulic connections (engine start/stop from the crane seat), oil shut-off valve, tool compartment for chainsaw, bracket for snow chains, holders for broom and shovel on the headboard. Body primed, chassis black, epoxy primed and coated in acrylic quality, oil filled, TÜV approval – UVV inspection – tachograph test included. With: Palfinger-EPSILON loader crane Y CRANE ON 2 M 12 Z91 – fully hydraulic timber loading crane M12Z. EPSILON loading crane, crane folded sideways, version HIC/HD4/04. Base unit and crane column painted RAL 7021 anthracite grey, hydraulic lines protected, integrated operating switch and service interval indicator. MZ91_2: Z-boom system 9.1 m, reach: 9.1 m, net lifting moment: 107 kNm, maximum performance: 107 kNm. HHC_2: High seat with removable manual control, including mechanical slewing gear at the crane column (without slewing ring). B1B Electronic braking system with ABS and ASR, B1F heating, electronic air supply unit, B1H electronic air supply and control, medium, B2A disc brakes on front and rear axles, B2X electronic parking brake, B2Z additional parking brake on front axle, B4A condensate monitoring for air system, B4M air reservoir, steel, B5A trailer brake, two-line, brake couplings left, C2R wheelbase 4,800 mm, C4L frame overhang 2,550 mm, C6J non-regulated steering aid pump, C6Q stabiliser, front axle, C6U additional stabiliser, rear/trailing axle, D0A leather steering wheel, Lhodpfx Ameyfpwnjmjh D0S compressed air connection in driver’s cab, D1C comfort driver's suspension seat, D1N functional co-driver’s seat, D2N seat backrest release, driver’s seat, D3B comfort bunk, lower, D4T cross curtain in front of bunk(s), D4Y sun roller blind, side, driver side, D5F LED ambient lighting, D6G automatic climate control, D6M additional hot water heating, cab, D7A extra thermal insulation, D8N electric lifting roof, E3R 24V/25A power socket, co-driver footwell, E5H night driving light switch, E5K MirrorCam switch, on bed, E6A trailer socket 24 V, 15-pin, E6Z reversing alarm, E7F cable remote control for air suspension, E9G pre-installation for electrical devices, F0F side module, N3 vehicle, F0T illuminated Mercedes star, F2E floor variant, tunnel 170 mm, for storage compartment left, F2G cab width 2.30 m, F2W StreamSpace, F5L outside sun visor, transparent, F6C tinted windscreen, F6I heated front mirror, F6Q air horn, F6T MirrorCam, F8V light sensor, F8W rain sensor, G0B drive train, 44 t to 80 t, G0R gearbox support arms, optimized for removal, G0T...

Condition: good (used), Engine control, software, hardware -Manufacturer: IMPCO Spectrum -Type: 1026651B42605008 Lhodecpg Hgopfx Ammjh -Type: 14110020012229 -Type: 56-pin ECI -Quantity: 1 piece available -Price: per piece -Weight: 0.9 kg/piece

Condition: used, Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Hohner, Encoder rotary encoder -Type: 10 23651 400 -Shaft: Ø 6 x 10 mm -Quantity: 1x encoder available Lsdjq Adpuopfx Ammshh -Dimension: 80/58/H69 mm -Weight: 0.5 kg

Condition: new, Year of construction: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 W x 1300 H x 900 D External dimensions: 980 W x 2100 H x 1600 D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter area: 22.5 m² Fan: Aluminum Fan noise level: 74 dBa Ledsb Al Sbjpfx Ammshh Air flow: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request.

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Extraction port: 2 x 100 mm Width: 1,700 mm Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Lsdpfoud Sk Sjx Ammohh Motor voltage: 3 x 400 V Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Year of construction: 1999, condition: excellent (used), We are offering a Heizbosch natural gas boiler. Type LLR 4000 Boiler with a 4 MW output Year of manufacture: 1999 Flow temperature: max. 120 °C, Pressure: max. 6 bar Water capacity 5720 l Ledpfoxxa Ivox Ammohh It has only been used very rarely, primarily for cleaning two adjacent biomass boilers.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Lhodpoxbfutofx Ammeh

Condition: used, mileage: 432,400 km, power: 375 kW (509.86 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 9,850 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, axle configuration: 3 axles, wheelbase: 3,300 mm, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, additional headlights, cruise control, differential lock, electronic stability program (ESP), low noise, navigation system, onboard computer, parking heater, retarder, traction control, Urea tank (AdBlue) Displacement 12,809 ccm Hydraulics (power take-off) EBS ESP Payload 16,150 kg Automatic air conditioning Sun visor 1 couch Rotating beacons Light bar Euro 6 A VIN-No.: 1L845281 Ledsuu Nrpopfx Ammehh Errors excepted

Condition: used, machine/vehicle number: 525, mileage: 740,500 km, power: 375 kW (509.86 HP), first registration: 04/2009, fuel type: diesel, empty load weight: 16,340 kg, maximum load weight: 10,660 kg, overall weight: 27,000 kg, tire size: 315/80 r22,5, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space volume: 14 m³, loading space length: 6,500 mm, loading space width: 2,490 mm, loading space height: 850 mm, Equipment: ABS, additional headlights, air conditioning, crane, cruise control, differential lock, hydraulics, low noise, parking heater, retarder, traction control, trailer coupling, EBS Engine capacity 15,928 cc Urea tank (AdBlue) Lhjdpfxon I Rn Ne Ammsh Automatic air conditioning Palfinger PK 25001 EL radio Cable winch Clutch pedal Telligent circuit Sun visor Air horns 1 couch cool box Outreach: 11.1 m = 1,900 kg / 14.4 m = 1,330 kg / 18.0 m = 1,030 kg VIN no. 1L405877 Errors excepted

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Lhodpfx Amjuhn Diemjh Turntable

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Lsdpshmi Ucjfx Ammehh

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Lsdpfoyddqmjx Ammehh Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Lhodpfxsulah Ns Ammeh Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 12 kg, power: 45 kW (61.18 HP), controller model: SIEMENS Simatic, TECHNICAL DETAILS Drum diameter: 400 mm Maximum workpiece length: 700/1,000 mm Maximum individual workpiece weight: 12 kg Load capacity: 100 kg MACHINE DETAILS Control system: SIEMENS Simatic Ljdpfx Amezcl I Domehh Installed power: 45 kW Centrifugal wheels: 4 units Centrifugal wheel type: Hurricane H 28 Power per centrifugal wheel: 7.5 kW