Used Wacker Neuson Dpu 100-70 Lfs for sale (32,910)

Condition: excellent (used), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climate and temperature test chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is used to simulate a wide range of environmental conditions and is typically employed in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, suitable for: - Material testing - Aging tests Hjdsyxmi Aopfx Al Ssl - Electronics and component testing - Climate and environmental simulation Thanks to the large test chamber (1000 liters) and advanced control technology, both rapid temperature changes and steady long-term tests can be performed. The system is water-cooled, ensuring stable and efficient operation. Technical data: Control: - Multi-touch controller with integrated program generator - Programmable test sequences - Side cable port: 50 cm / 125 cm Temperature range: - Temperature: –70°C to +180°C - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature constancy: ± 0.3 K Climatic data (humidity): - Climate temperature range: +10°C to +95°C - Humidity range: 10% to 98% rH - Humidity stability: - Range I: ± 1.5% rH - Range II: ± 3% rH - Dew point range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - Exterior (HxWxD): 1950 x 1270 x 2245 mm - Interior (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Rated current: approx. 26.8 A Refrigeration system: - Refrigerant: R404A & R23 - Weight: approx. 900 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented trial run. Condition: used Scope of supply: (see photo) (Technical data and specifications subject to change and error!) For further questions, you are welcome to contact us by phone.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, Langzauner LZG 1000/700/1400 long belt sander large projection 1000 mm table dimensions 2500 mm Hjdpsr Axf Tofx Al Sol belt dimensions 6800 x 150 mm right left run 2 belt speeds 11 and 22 m/sec vacuum clamping device lighting year of manufacture 1977 tested for functionality dimensions 3700 x 1200 x 1500 mm weight 950 kg price 2500.-

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an Arburg injection moulding machine, model 370 C 800-100. Technical Data: Year of manufacture: 2007 Injection unit unfortunately not included Clamping force: 800 kN Clearance between tie bars: 370 x 370 mm Hedpeyxqiyjfx Al Sol Max. platen distance: 750 mm Mould installation height: 250 mm Injection unit: 100 Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., Hsdpfx Alexabcwj Sjl but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Hjdpfeixtitsx Al Sel Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone.

Condition: used, Year of construction: 2019, functionality: fully functional, power: 4 kW (5.44 HP), pressure (max.): 10 bar, Equipment: type plate available, For sale due to business closure: powerful and durable Aircraft compressor with Aircraft refrigerated compressed air dryer. Purchased in 2019, compressor year of manufacture: 2018, dryer year of manufacture: 2019. Hodjyup H Iopfx Al Sjl

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Hjdeyud Uaepfx Al Sel

Condition: used, Drive . kW Capacity . kg/h material . 8 pieces For manipulator A5.1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hjdpsyqvm Tsfx Al Sjl We look forward to your visit. Your Markus Hirsch Team

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, load capacity: 70 kg, arm reach: 2,100 mm, pivoting range: 360 °, controller manufacturer: Kuka, controller model: KRC4 SC8, Equipment: documentation/manual, Kuka robot including Schmalz suction surface. Extensive accessories (see item list pictures) Hedpfx Aeub Uy Djl Sol The robot was operated for exhibition purposes, has 50 operating hours and can be used for any other purpose besides palletizing. Robot will be provided disassembled on pallet for delivery.

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity Hsdpfjph U Aysx Al Ssl - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, System: Membrane-mix filter press Type: Membran-Mix 1000/70 Design: Side beam guided Hedowy H I Ispfx Al Ssl Year of manufacture: 2012 Model No.: SE1000CRD Filter plate format: 1000x1000 mm Number of plates: 70 Filter plates: PP Cake thickness: 40 mm Filter cloths: optionally available, adaptable to the medium Pressing volume: approx. 1600 dm3 (unpressed) Filtration pressure: approx. 15 bar Closing pressure: approx. 380–410 bar Plate transport: automatic Pump technology: optional Hydraulic unit: yes Control cabinet: yes Purchase or rental: Inspection of the systems at our plant by prior arrangement.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Hersteller: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Hodpjyiz U Tjfx Al Sel Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: used, Year of construction: 2003, 2 x injection moulding machines Manufacturer: Arburg Model: 320K 700-100 Year of manufacture: 2001 and 2003 Hodpfx Aljykp D Es Ssl

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? Hsdpfsx U Dnujx Al Sjl For more information or contact options, please visit our website.

Year of construction: 2012, condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Hodpfot E Tq Rex Al Sol

Year of construction: 2001, condition: ready for operation (used), Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement. Hodexx Ufijpfx Al Ssl

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Hedeygib Nspfx Al Ssl Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 8 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece Hsdpfx Aob D I Dujl Ssl

Condition: used, Standard foot for welding table, table foot, table foot for welding table welding and assembly tables, support foot -Standard foot: Support foot for welding and assembly tables -Height: finely adjustable -Quantity: 20x table base available -Price per piece Hsdpfx Alst Trx Nj Sjl -Total dimensions: 670/100/100 mm -Weight: 7.6 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-100-700-PPV-A -Lifting stroke: 700 mm -Piston: Ø 100 mm -Piston rod: Ø 25 mm / M20 x 1.5 -Max. Pressure: 10 bars -Dimensions: 925/110/H165 mm Hedpfsiiwf Nox Al Ssl -Weight: 12 kg

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 265 mm -Total height: 70 mm -Struts: wall thickness 2/2,5 mm -Bridge height: 30/10 mm -Gratings: Hot-dip galvanized -Quantity: 3x grids available Hedpfx Asrrzc Eol Sol -Price per piece -Weight: 7,7 kg/piece

Condition: good (used), scrubber-dryer, floor cleaning machine, mop, gearbox Hedokx Sriopfx Al Sjl -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 .: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc.

Condition: good (used), Tool holder, milling tool holder Hodpfxjb D I Dcs Al Sol -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 28 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Condition: used, Electric motor, three-phase motor Hsdpfx Aljd Ty A He Sol -Lenze: GFT 100-2 (0.6 kW 800 rpm) -Power: 0.6 kW -Speed: 800 rpm -Lenze fan: S2E 170 (0.05 kW 2500 rpm) -Shaft: Ø x L 28 x 60mm -Construction: B3 -Dimensions: 710/260/H200 mm -Protection class: IP54 -Weight: 31.5 kg

Condition: new, Year of construction: 2026, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., Hsdpfsxaar Dsx Al Sjl but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual