Used Wacker Neuson Vibratory Plate for sale (12,392)

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm Ijdpfx Anewnfz Nswjic 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Year of construction: 2001, operating hours: 1 h, Power: 3 kW (4 HP) Iisdpfx Anex R Txhjwjc Please contact Emal Jaweed for more information

Condition: good (used), Cast iron bed - Floor Plate Iijdpfjh Auahox Anwjc Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Iiedpfxexrb S Ne Anwec

Condition: ready for operation (used), Stainless steel tub Iodpox Hyp Ejfx Anwsic Dimensions: 1900 x 890 x 200 mm

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Iedpozc Rkwjfx Anwsic Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Isdpfxezc N Rce Anweic Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg

Condition: used, plate width 4000 mm plate depth 3000 mm Isdpfxjzfqm Ns Anwjic plate height 300 mm weight / kg LxWxH: 4000 x 3000 x 300mm

Condition: used, (8) Angle plates as detailed. Isdpfxjyi Tbfs Anwjic 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112787 1020mm x 1010mm x 4280mm Angle Plate 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: used, sheet width 1050 mm Iisdpozfayfofx Anwjc plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic, slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Ability to enter target and actual values for the backgauge * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard Ijdpfx Anoyzi Nwowoic - 1x sturdy side stop with T-slot

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Ijdpfxswtpgts Anwoic Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm Iisdpfxjzd Hb Hs Anwoc no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Year of construction: 2019, condition: excellent (used), Autopack Vibratory hopper Iiedpezcg Ewjfx Anwjc 2019, Stainless, 150Kgs stainless hopper, 250mm discharge width, overall length 1500mm x overall width 1050mm, 1Ph

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm Iiedpfxocn Ibgs Anwsc -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece -Weight: 235 kg/piece

Condition: new, ZF anchor plate 6629.235.001 ZF anchor plate 6629.235.001 Original ZF anchor plate from stock. Unused spare part in original packaging. Isdpfx Anjzfi Sqsweic Manufacturer: ZF Friedrichshafen AG Designation: Anchor plate Part number: 6629.235.001 Marking: 75-64-04 ZF number: 60140176 Condition: NOS (New Old Stock) Original part: Yes

Condition: excellent (used), Here, we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC cleanroom technology heating plate Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V, 3 phases, 50Hz, 30A Max. temperature: 200°C Type: Y9AT417 Condition: used Isdpfszdqbqjx Anwsic Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Bosch Rexroth manifold plate NG16 and loose parts R901190435 9000004130 # BOSCH REXROTH Isdpfxozd Ny Es Anwoic

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Complete series plate NG16 and loose parts R901190435 9000004130 Iisdpfxjzd Nyxo Anwjc BOSCH REXROTH

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Ijdpfezd A Rdjx Anwsic Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: good (used), total width: 2,000 mm, total length: 3,500 mm, total height: 250 mm, overall weight: 5,250 kg, plate height: 350 mm, T slotted bed plate ASQUITH - ST-35 T slotted cast iron floorplate 3500 x 2000 x 250 mm Iedpewp D S Nefx Anweic MACH-ID 6474 Make: ASQUITH Type: ST-35 Floorplate Length: 3500mm Floorplate Width: 2000mm Height: 250mm No. Of T-slots: 8 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Number of matching pieces: 1 Length: 3500mm Width: 2000mm Height: 250mm Weight: 5250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 4,800 kg, total height: 390 mm, total length: 4,660 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT Cast iron floorplates 4660 x 2100 x 390 mm (5x) there is a 3e (shorter) plate avaielebl in size 3050 x 2100 x 390 mm    Vloerplaat lengte: 4660mm Vloerplaat breedte: 2100mm Vloerplaat dikte: 390mm Aantal T gleuven: 7 Sprong / Hart op Hart: 300mm T -slot size: 28mm Iijdszc Im Nepfx Anwec Gewicht per plaat ca.: 4800kg Number of matching pieces:2,5 Lengte: 4660mm Breedte: 2100mm Hoogte: 390mm Gewicht: 4800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 8,800 kg, total height: 400 mm, total length: 4,000 mm, total width: 2,100 mm, T slotted bed plate STOLLE - RTS Cast iron floorplates 4000 x 2100 x 400 mm (2x) MACH-ID 6442 Make: STOLLE Type: RTS Year: 1995 Floorplate Length: 4000mm Floorplate Width: 2100mm Height: 400mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 36mm Weight a plate approx.: 8800kg Number of matching pieces: 1 Length: 4000mm Width: 2100mm Iisdjzc Ihtepfx Anwec Height: 400mm Weight: 8800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 5,600 kg, total height: 400 mm, total length: 4,000 mm, total width: 1,875 mm, T slotted bed plate UNION - DT Cast iron floorplate 4000 x 1900 x 400 mm Floorplate Length: 4000mm Floorplate Width: 1875mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:315mm T -slot size: 36mm Weight a plate approx.: 5600kg Number of matching pieces: 2 Length: 4000mm Width: 1875mm Height: 400mm Weight: 5600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iiodpfx Anjzc Ihgjwsc

Condition: excellent (used), Year of construction: 2010, overall weight: 3,200 kg, total height: 353 mm, total length: 4,000 mm, total width: 1,000 mm, T slotted bed plate STOLLE - TRD Cast iron floorplate 4000 x 1000 x 355 mm MACH-ID 6445 Make: STOLLE Iodpfezc Igvox Anwjic Type: TRD Year: 2010 Floorplate Length: 4000mm Floorplate Width: 1000mm Height: 355mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm T -slot size: 42mm Weight a plate approx.: 3200kg Number of matching pieces: 1 Length: 4000mm Width: 1000mm Height: 353mm Weight: 3200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!