Used Wafios Wafios Straight & Cut R7/50 for sale (46,376)

Condition: good (used), functionality: fully functional, Year of construction: 2008, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Predpsz Dumzsfx Anyob Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,980 h, load capacity: 5,000 kg, lifting height: 7,070 mm, free lift: 2,330 mm, fuel type: gas, mast type: triplex, construction height: 3,180 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 7,980 kg, total length: 4,600 mm, drive type: Treibgas, construction width: 2,250 mm, Side loader Load center: 700 Fork width: 180 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Prodpfxjz Evpgo Anyjb Rear tire size: 28x12.5-15 Description: In addition to this Jumbo model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing at favorable conditions are always possible for us. We also gladly purchase your used equipment, even if you don't purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this JGQN 50/14/70TV. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Fork positioner, Heater, full cabin, full free lift, Platform height: 850 mm

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 150 kg, type of input current: three-phase, input voltage: 400 V, table length: 800 mm, table width: 600 mm, table height: 100 mm, operating pressure: 4,200 bar, warranty duration: 12 months, input current: 80 A, total height: 1,650 mm, total length: 2,200 mm, total width: 1,890 mm, overall weight: 3,000 kg, input frequency: 50 Hz, Where conventional cutting methods reach their limits, our micro-waterjet cutting machines set new standards in terms of precision, angular accuracy, and process stability. Designed for the most demanding applications in precision machining, this system combines mechanical excellence with state-of-the-art measuring technology. The robust granite machine bed forms the vibration- and temperature-stable foundation for the highest level of sustained accuracy. In combination with contactless linear motor axis drives, traversing movements are realized with almost no friction, high dynamics, and without mechanical play. The highly efficient 5-axis tilt cutting head ensures maximum cutting quality and perfect edges by dynamically compensating for the design-related beam cone, thereby achieving an angular accuracy that is far superior to that of standard 5-axis heads. To guarantee these peak performances permanently, each system is completely measured and calibrated using a Renishaw laser interferometer before delivery. The result: Calibrated micrometer precision for your most extreme manufacturing requirements. Complete system / ready for immediate use. Psdpfxoz Euxms Anyorb Leasing or hire purchase is possible through our financing partner. Do you require a different performance level or table size? – No problem, we have several machines in stock or available on short notice. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer Prsdpfx Aegrkigonyjb HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Technical Data: Prodpfx Asz E Axuonyeb CNC Control: BYSTRONIC BySoft Laser Type: CO2 Working Area: 3000 x 1500 mm Travel Range X-Axis: 1562 mm Travel Range Y-Axis: 772 mm Travel Range Z-Axis: 100 mm Bylaser Power: 2.2 kW Wavelength: 10.6 µm Rapid Traverse X/Y/Z: 100 m/min Cutting Capacity Steel: 8 mm Cutting Capacity Stainless Steel: 6 mm Cutting Capacity Aluminum: 4 mm Fume Extraction System with Water Cooling: EF WKL 300-F CE Marking Dimensions (Length x Width x Height): approx. 13500 x 2500 x 2500 mm Weight: approx. 13.5 tons Condition: Very good condition Only 6,500 operating hours The machine comes from a vocational school, not from a production facility The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm Pedpsu Tp N Djfx Anysrb - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! Predpeu Ib D Ejfx Anyjb i.D. *

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Psdpfjyhhn Dsx Anyjrb Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: MAX Photronic, laser source model: MFSC-6000, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 10 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,200 mm, working length: 3,050 mm, working width: 1,530 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 115 m/min, feed rate Y-axis: 115 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, overall weight: 6,030 kg, total length: 910,041 mm, total width: 4,100 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Combination fiber laser cutting machine for sheet metal & tubes with pallet changer Prodpfx Ansywwv Djyjb PG3015T6 – Full equipment - Working area for sheets: 3050x1530 mm - Working area for tubes: 15x15 / 230x230 mm & D15 / D230 mm - 6 kW MAX Photonics laser - Water chiller - Fume extraction unit - Automatic O2/N2 pressure regulation - Automatic focusing head - YASKAWA servo motors - Light curtain for loading table - Complete operator safety enclosure - CE conformity

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: MAX Photronic, laser source model: MFSC-6000, laser power: 6,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,300 mm, feed rate Y-axis: 110 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, overall weight: 4,800 kg, total length: 9,250 mm, total width: 2,635 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, Fiber laser tube cutting machine TH6020 – Fully equipped - Working range – tubes: 15x15/230x230mm & D15/D230mm - 6 kW MAX Photonics laser - Water chiller - Fume extraction unit - Automatic O2/N2 pressure regulation - Automatic focusing head Predpfxoywxl Ts Anyeb - YASKAWA servo motors - Complete operator safety enclosure - CE conformity

Condition: used, Technical details: Psdou Nwfuopfx Anysrb cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min Psdsvvrpkspfx Anyerb spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: used, Year of construction: 2001, 7-Axis Turning and Milling Center Manufacturer: OKUMA Type: MacTurn 50 Year of Construction: 2001 Control: OSP-U100L Spiral and Circular Interpolation Upper Turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1, indexed Turning Diameter Max.: 610 mm Pjdpfx Anjz D I Ifjyjrb Turning Length Z1 Min.: 1,500 mm Swinging Diameter: 610 mm Turning Diameter over Cross Slide: 580 mm Center Distance Approx.: 2,000 mm Tool Holders: BT50 Driven Tool Holders BT50 = 40 – 3000 rpm ATC Magazine 72 BT50 For Turning: ≈ 36 Driven Tool Holders: ≈ 36 Lower Turret V8: X2 = 200 mm Z2 = 1,045 mm Turning Diameter Max.: 380 mm Turning Length Z2 = 1,045 mm Swinging Diameter = 380 mm Tool Holders: VDI40 Turret: 8 positions VDI40 Spindle: Speed Range: 14 – 2800 rpm at 37 kW Chuck: D400mm Spindle Bore: 110 mm Spindle Nose: A2-11 Torque Approx.: 2,000 Nm Coolant System with 40 bar pressure New Screen New Panel Multiple BT50 Tool Holders Weight Approx.: 20 tons Space Required L/W/H: 8,000 x 3,500 x 3,500 mm 28926

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A-260606, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 77 mm, overall weight: 300 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 2 A, cutting height (max.): 100 mm, Object A260606 Refurbished Gingerbread/Cake Slicing Machine Fully refurbished gingerbread slicing machine with a cutting thickness of 77 mm. All electrical switching equipment and pneumatic components have been replaced in accordance with the latest state of current technology. By equipping the machine with two-hand operation, it has been made very safe to operate. Machine Information: Overall machine length: 1.6 meters Overall machine width: 1.25 meters Overall machine height: 1.3 meters Machine working height: 0.9 meters Distance between knives: 77 mm Machine Capacity: 240 wide slices of bread per hour Electrical Information Power supply: 400 V, N+PE Power consumption: 1.0 kW Plug type: CEE-form, 5-pin, 16 A (round red plug) Compressed air required?: Yes Minimum and Maximum Product Dimensions Product length: 100–500 mm Product width: 80–755 mm Product height: 40–100 mm Machine Description Predpfx Ansz Eryboyeb This cookie slicing machine has been completely refurbished. The machine was fully disassembled, thoroughly cleaned by blasting, and coated with a durable two-component finish. It was then completely rebuilt. The machine is equipped with new bearings, a new drive motor, new pneumatic components, and a renewed and improved electrical system based on the latest technology. The machine is mounted on wheels. The speed of the product pusher is adjustable, allowing it to be adapted to the type of product being processed. This machine is in like-new condition! The machine is suitable for slicing breakfast cake (gingerbread-style cake) and/or currant bread. The machine is equipped with two swivel castors with brakes and two fixed castors. Warranty: 3 months (excluding knives)

Condition: used, functionality: limited functionality, machine/vehicle number: A-260605, input voltage: 400 V, overall weight: 500 kg, type of input current: three-phase, total length: 1,750 mm, total width: 1,300 mm, total height: 1,600 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, Equipment: compressor, Object A260605 Sinmag CT808 Cake Cutting Machine Semi-automatic cake cutting machine with 10 different cutting programs, designed exclusively for round cakes with a maximum diameter of 300–335 mm and a maximum height of 100 mm. Machine Specifications Total machine depth: 1.75 m Total machine width: 1.30 m Total machine height: 1.60 m Working height: 1.00 m Maximum cake diameter: 300–335 mm Maximum cake height: 100 mm Machine Capacity: Capacity is entirely dependent on the number of portions/slices to be cut. Electrical Information Power supply: 230 V, N + PE Power consumption: 1.0–1.15 kW Plug type: 2 × standard household plugs Compressed air required: Yes Prjdpsz Eui Sefx Anyeb Minimum and Maximum Product Dimensions Product diameter: 100 to 335 mm Product height: 20 to 100 mm Operating Description – Sinmag CT808 Cake Cutter The Sinmag CT808 is a semi-automatic cake cutting machine designed for accurately dividing round cakes and pastry products into equal portions. The machine is controlled via a Siemens PLC control system with a touchscreen interface, allowing various cutting programs to be selected and adjusted. All settings are controlled through a Siemens touchscreen display, which also supports multiple language options. The machine is clad with polished chrome-finished stainless steel panels, providing a high-gloss appearance, and is mounted on four swivel castors with brakes for easy movement and secure positioning.

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Predpfx Aoxw Uqvenysb Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment Pedpfx Anjzqnxtoyjrb - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Pjdpfx Aney Nl U Soyerb

Year of construction: 2012, condition: ready for operation (used), MFK DR 426 Edge milling cutter, deburring tool, chamfering tool Compressed air connection: 6 - 10 bar Turning rest diameter: max. 3 mm steel Shearing force: at 8 bar, 450 kp Dimensions: 330 mm x 300 mm x 320 mm (L x W x H) Weight: approx. 20 kg You are welcome to visit us for a demonstration. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Prodpfoz E U Tqex Anyjb Deviations from technical data and errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 2015, pressing force: 2,500 t, total length: 8,700 mm, total width: 4,000 mm, total height: 8,000 mm, overall weight: 530,000 kg, LOIRE SAFE Hydraulic Press – High-Performance System for Tooling and Heavy Forming Applications This high-performance hydraulic press, designed in a rigid 4-column portal frame construction, is ideally suited for demanding applications in toolmaking (tryout / spotting) as well as large-scale forming operations. The stress-relieved welded structure ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders and a multi-cylinder parallel control system, achieving high repeatability in the range of ±0.1 mm. The powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approx. 450 bar, delivering both precision and high pressing force. Control is handled via a Siemens S7-317F PLC combined with servo-controlled axes (Rexroth MLC) and visualization through Siemens WinCC. This setup enables fully programmable press cycles, storage of tool parameters, and user-friendly operation with integrated diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped with front and rear light curtains (Category 4), ram parallelism monitoring, emergency stop with defined reaction time, and optional two-hand operation. The system is CE-compliant and meets modern safety standards. The equipment includes a hydraulic three-part die cushion, a hydraulic ram cushion, and a sliding table with approx. 4,000 mm stroke. Additional features include a DIN-standard pin field and integrated shock damping for demanding forming processes. Toolmaking (tryout / spotting) Heavy forming applications Automotive industry Straightening, bending and pressing of large components Weight approx.: 530,000 kg Psdpfx Ansz E T T Aeysrb Table length: 5,000 mm Dimensions (LxWxH) approx.: 8700 x 4000 x 8000 mm Inlet width: 2,500 mm Pressing force max.: 2,500 t Inlet height: 2,200 mm Year of construction: 2,015 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: as good as new (ex-display), Year of construction: 2022, 450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder Pjdpfxeh Uctve Anysrb -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding Width: 40mm Total Power: 8KW Power Supply: 3PH+N+PE Air Source: 0.8MPa (As 40*30 products, 25m a small roll calculation: 3000m raw materials, average 30 minutes a roll of raw material. Every 25m a small roll and rewinding 6 rolls at the same time. 720 rolls can be produced in 10 minutes) Machine in stock in our showroom

Condition: used, OMGA T421 IDC000097 Psdpeu Dhupjfx Anysrb - saw blade diameter: 400 mm - complete with saw dust filter

Condition: used, Year of construction: 2016, functionality: fully functional, Conveyor line / roller conveyor system / material handling system, material handling equipment, approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Conveyor line Condition: Used Year of manufacture: 2016 The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° bends 2 x Folding elements / passage elements 1 x Control cabinet 25 pcs adjustable feet and the remaining conveyor belt / roller conveyor, approx. 34 meters Total length: approx. 50,000 mm Total width: 750 mm Conveyor width: approx. 680 mm Roller diameter: 50 mm Psdpfx Aex Ala Eenyorb Internal article number: 2025120101 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The material handling equipment was in operation until disassembly. Thanks to the excellent workmanship of the material handling equipment, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 29 h, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,390 mm, fork length: 1,400 mm, empty load weight: 10,100 kg, total length: 4,760 mm, drive type: Diesel, construction width: 2,260 mm, Side loader Load center: 700 Fork width: 215 mm Fork thickness: 66 mm Prodpjz Ewgmefx Anyob Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DQrs60/14/50 model. P.S.: Our forklift workshop specializes in the repair, refurbishment, overhaul, and custom modification of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Fork positioner, Fork positioner opening range: 510/1,310 mm; 1 NIVO fork; Telescopic forks: 1400 / 2,450 mm Heater, full cab.

Condition: good (used), machine/vehicle number: 3513, Year of construction: 2009, load capacity: 32,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,900 mm, total width: 3,700 mm, operation weight: 46,000 kg, additional equipment features: Engine heater, Centralized greasing system, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Podpfx Anoyuil Rsyorb Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Wheel size – Steering wheel: 16.00x25