Used Waters Alliance Separations Modules for sale (14,391)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Dsdjxk T Efepfx Ad Njkl Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: like new (used), Year of construction: 2025, operating hours: 320 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Dkodpfxevgrpxj Ad Nol GWARANCJA PRODUCENTA SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Year of construction: 1996, condition: good (used), Offer drinking water treatment plant Water treatment plant 120 cubic meters/hour year 1996 functional in 6m container Control system, pumps available. Formerly used as supply for container village. Djdjhr D Hnepfx Ad Nekl

Condition: used, Multicar M25 Dksdjv Dwraepfx Ad Nel Year of manufacture: 1986 -with water tank (water truck body) -with spreader body

Condition: excellent (used), Lima RM 300 Separator Dkedpfey D T N Hsx Ad Njl

Condition: used, comprising: base frame, 2 storage tanks, stainless steel, tank vessel by WERIT, reverse osmosis unit, type: SILHORKO, year 1995, control cabinet by RITTAL, with piping system, filtration, pump and valve technology, as well as 2 tipping skips, wheeled/mobile Dksdpfx Aey Aqched Nel

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Djdsy Eyrdopfx Ad Njkl Stable, continuous operation High and consistent granulate quality Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Fast return on investment Reduced material losses Reliable and long service life Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Condition: like new (used), functionality: fully functional, 30 kW motor Includes power and control cabinet. Dkedsy Awc Ispfx Ad Njl Comes with tools Inspected and in very good condition

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1698 250, production capacity: 30,000 unit/h, Milk skimming separator, capacity: 30.000 liter per hour. Including all tools for maintenance. Dkjdpfx Aexxyc Ted Nol

Condition: excellent (used), Year of construction: 1999, production capacity: 5,000 unit/h, Bactofuge, self cleaning. Including bowl, bowl speed: 6.255 rpm, motor cover, base frame, pneumatic counter pressure valve milk, flowindicator and manual flow regulation valve for bactofugat with remix into the inlet. Set of manouvering water valves. Motor 7,5 kW - 15 A - 1.445 rpm. 5 Tools Ring key and lift device included. Free standing control panel with Westfalia controls. Total dimensions: 145x100x150 (lxwxh) - weight: 497 kg. Dkjdpfxjyzxaxo Ad Nel

Condition: ready for operation (used), Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Dedoy Ezbaspfx Ad Nokl Dimensions: 1374 x 857 x 2283 mm Weight: 400 kg Airflow rate: 4000 m³/h Electrical power: 3.7 kW Max. 400 V; 50 Hz Total filter surface: 38.9 / 108 m²

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Height: 2287 mm Dksdpfxjy Ezapo Ad Nol Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: FilterStufe2 L1020/300/2 – 4 pcs HEPA LH 1020/1 – 2 pcs

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Volume: approx. 1,25 m³ Cutting width: 1.500 mm 4 shafts combined adaptor for excavator and wheelloader Dodpjnubawsfx Ad Njkl

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Dedjqi Eh Hjpfx Ad Nekl Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: used, tank capacity: 23,600 l, total length: 5,000 mm, total width: 3,000 mm, total height: 1,750 mm, with manhole and outlet; test pressure: 2.3 mWC; previously used as fresh water tank Dsdoycr Nnopfx Ad Nokl

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Dodpfxox H Ny Te Ad Nskl

Condition: new, Sand filters for salt water. 59m3 each tank prepared for cleaning with air and pressurized water. Occasion, unused. Dedpfx Adsgtifqo Nskl

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes Dedpjnab Rzefx Ad Njkl - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer! Dkjdsnab Siopfx Ad Nol

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training - Service, training and maintenance work Dksdpfxsrwxu Io Ad Nel Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Our team will be happy to help you.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines Dkjdpfxsua Tbwo Ad Nol The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Dkodpjh D H Rcefx Ad Nol Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) Dsdpfxoyc H Ire Ad Nskl • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: • CNC machines • Injection molding machines, extruders • Production lines • Process cooling • Plastics, metal, chemical industries

Condition: used, This listing is for the Elga Veoli LA757 Labwater Purification The unit is in full working condition and ready for immediate use Designed to deliver high-quality purified water for laboratory applications, this system is compact, efficient, and suitable for analytical and research environments requiring consistent water purity. Transparency Report and Technical Audit: Dkjdpeyyn D Djfx Ad Njl • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Dksdpfx Adewqlmdj Nsl