Used Weeke Drilling Line for sale (14,759)

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. Cjdpfev I S D Sjx Aiperc High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Crodpfjkw H Ekox Aipjc

Condition: used, Year of construction: 2006, functionality: fully functional, BARGSTEDT LOADER Credpfxowrdg Ej Aipjc BARGSTEDT TURNER (front side/back side) WEEKE THROUGHFEED DRILLING PROFI LINE BHH 35 WEEKE THROUGHFEED DOWEL INSERT BST 100 BARGSTEDT UNLOADER

Condition: ready for operation (used), Year of construction: 2016, Stainless steel kneading bowl Csdpfxjv Twgpj Aipsrc Manufacturer - Bago-Line/Sottoriva. Model - Twist 90/1. Year - 2016. Voltage - 3x400V. Electric power - 6.5kW. Water dosing included. 90 liter kettle. CLH.24

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Cjdpfew A Ng Ejx Aiporc The machine is assembled and can be tested.

Condition: excellent (used), Year of construction: 2011, used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year of manufacture: 2011 Cedpjymzfgofx Aipjrc 4-axis nesting machine O-TRIX work table 3700 x 2200 mm Vacuum pump 3 x 300m³/h with frame X-axis working area: 3700 mm Y-axis working area: 2100 mm Z-axis working area: 100 mm 25 vertical drilling spindles Milling spindle 12 kW up to 24,000 rpm with C-axis, 360° interpolation, liquid circulation cooling Air blast nozzle at milling tool, integrated in extraction hood – 14-fold tool changer, rear-mounted Lifting table for the system 3700 x 2100 mm, load capacity 3500 kg Stacking height 480 mm Intermediate handling table Vacuum arm for raw panel positioning, infeed bracket Ejector, conveyor belt 4000 x 2100 mm POWERCONTROL PC 85 control with 17″ TFT WoodWop 6.0 incl. MDE and production list software Woodnest Complete and Woodnest Professional Delivery includes only illustrated tools and HSK holders!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in excellent condition and currently in daily production use (approximately 2–3 hours per day). Crodpfx Aioym Tc Rjpjc It is being replaced with a newer, larger machine due to increased production capacity requirements. The machine is available immediately. Technical specifications and detailed data are shown in the attached photos. Worldwide shipping can be arranged for customers upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified Crsdpsym Nvtjfx Aipsc The machine has been regularly maintained and is ready for operation.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Credjyg E R Hepfx Aipsc Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Year of construction: 2008, condition: used, Labelling Machine / Marking System SRD Stano-/Alone-Line Features: * Used labelling machine with integrated marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged Year of manufacture: 2008 Technical Data: Manufacturer: SRD Model: Stano/- Alone-Line Unit: Valentin SPE 106/12 Internal article number: 2026012704 Semi-automatic marking system for image and audio media Csdpfx Aoyfgp Uoipsrc Refer to the operation manual, wiring diagram, and pneumatic diagram for details Tailor-made solutions for your intralogistics. Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to provide you with a custom quote or assist you with planning or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have successfully completed projects for companies from various industries, such as logistics, pharmaceutical, trades, and electronics. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or additional components such as picking racks or containers.

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Crjdpfep T Tghsx Aipsc Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Credpoxdbwijfx Aipsc Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm Credsdkf I Topfx Aipjc -Weight: 3 kg

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Credpfxogmhxae Aipsc Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: used, Safe Line metal detector Equipped with stainless steel reject flap Fully stainless steel and easy to clean by means of hatches Cedpfx Aijx Nzzzspsrc Metal detection diameter: 200 mm Total installation height: 1200 mm See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 1,000 mm, table length: 5,000 mm, table width: 2,000 mm, CNC Gantry Milling Machine Forest Line Seramill 240T – Robust & Precise For sale: Forest Line Seramill 240T CNC gantry milling machine, year 2000 – used, in excellent condition. Perfect for machining large workpieces with high precision. Key Features: Robust gantry design for maximum stability Accurate Siemens 840D control Csdpfjyfpkbsx Aiperc Large working area: 5,000 × 2,000 mm Travel: X 5,500 mm | Y 2,900 mm | Z 1,000 mm | A ±135° | C ±180° ISO 50 spindle, max. 6,000 rpm Ideal for series production and individual parts Perfect for carpenters, furniture manufacturers, and production workshops that want to machine large parts precisely. Available immediately! Contact us for details, photos, or a viewing.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-12-2554, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 80 mm, controller model: PC 85, TECHNICAL DETAILS Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Csdpsydnu Nofx Aiperc Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: ready for operation (used), functionality: fully functional, controller model: POWER PC 85 + WOODWOP 6.0, working width: 850 mm, working height: 60 mm, working length: 3,050 mm, TECHNICAL DETAILS Working dimensions: 3,050 x 850 mm Working height: 12 - 60 mm Drilling Head Vertical spindles X-axis: 8 Vertical spindles Y-axis: 5 Horizontal spindles X-axis: 4 Horizontal spindles Y-axis: 2 Milling Head Axes: 3 Tool change: Automatic Diameter of integrated saw unit: 100 mm MACHINE DETAILS Control: POWER PC 85 + WOODWOP 6.0 (updated in 2023) Credpfsydmcrex Aipec EQUIPMENT 4-position tool changer

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0-250-18-0294, functionality: fully functional, travel distance X-axis: 3,900 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 370 mm, table length: 3,550 mm, table width: 1,355 mm, No reserve price – guaranteed sale to the highest bidder! Csdpfxsxgd Eze Aipsrc Bidding obliges timely collection by the end of calendar week 45! TECHNICAL DETAILS X-axis travel: 3,900 mm Y-axis travel: 1,350 mm Z-axis travel: 370 mm Number of milling spindles: 1 Table length: 3,550 mm Table width: 1,355 mm Z-axis working range: 100 mm MACHINE DETAILS Weight: 4,500 kg Power: 22.0 kW EQUIPMENT Drilling tool Documentation CE marking

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. Crodpoq N U Duefx Aipjc - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-15-0310, functionality: fully functional, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, number of slots in tool magazine: 9, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Crjdpoxdw Tgofx Aipjc Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: excellent (used), Year of construction: 2008, Machining center Crsdpfxjh E Sghs Aipoc Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Width: 260 mm Cjdpfx Aisymzzujpsrc

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS WIDTH: 450 mm Codpjymzxyjfx Aipsrc

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Cjdpjx S Hzlsfx Aipsrc Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner