Used Weiss Wt11-1000/70/5 for sale (70,510)

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Nlsdpsvx Nfbofx Aa Ioc Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: refurbished (used), Year of construction: 2008, rotational speed (max.): 18,000 rpm, WEISS / SPL Motor Spindle HSK-A63 175389A 18000 rpm Manufacturer: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Type: Motor spindle Spindle type: 175389A Tool interface: HSK-A63 SPL type: DR-WE-175-M-W-18-46 Serial number: 60201670 Year of manufacture: 2008 Maximum speed: 18000 rpm Motor: AC135/200/4 Protection rating: IP54 Cooling: Water cooling Coolant flow rate: 8 l/min Temperature sensor: KTY 84-130, PTC Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Nledpsyrz Ryefx Aa Iec Total length L: 1026 mm Spare part number: 90010000013

Condition: refurbished (used), power: 19 kW (25.83 HP), rotational speed (min.): 1,100 rpm, rotational speed (max.): 15,000 rpm, Manufacturer: Weiss Spindeltechnologie GmbH Manufacturer group: Siemens Company Type: Motor spindle Spindle type: 175047 A Tool interface: HSK-A63 Motor designation: MW20/26-4 DBL 191299 Power P: 19 kW Rated speed: 1100 min⁻¹ Maximum speed: 15000 min⁻¹ Speed ranges: 1260 / 1710 / 4200 / 15000 min⁻¹ Frequency: 42 / 57 / 140 / 500 Hz Voltage: 137 / 175 / 400 / 400 V Current: 116 / 86 / 48 / 36 A Nsdpfx Asyrz N Aja Islc Standard: EN 60034 Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Overall length L: 1026 mm Spare part number: 90210001388 Item number: 211167

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 Nsdpfsgd D U Eex Aa Islc - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: good (used), functionality: fully functional, roll diameter: 60 mm, roll pitch: 150 mm, total width: 975 mm, total height: 174 mm, total length: 2,795 mm, conveying length: 2,795 mm, TAF item number: 1000005561 Manufacturer: unknown Nlodpsxdc Rwofx Aa Ioc Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,795 x 975 x 174 Width incl. side panel in mm: 975 Side height in mm: 80 Conveyor length in mm: 2,795 Conveyor width in mm: 870 Conveyor height in mm: 90 Roller pitch in mm: 150 Substructure: none Support roller axle type: IGM Support roller diameter in mm 60 Support rollers per axle: 1 Support roller material: steel, galvanised Drive: gravity Net weight in kg: Special features: incl. brake roller and guide on both sides for feeding Condition: used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, total length: 2,200 mm, total height: 140 mm, Item no.: 1000003701 Roller conveyor curve 90° Nedpfsqqk Atox Aa Ielc Technical Data: Manufacturer: unknown Year of construction: unknown Overall dimensions: approx. 2,205 x 600 x 145 mm (LxWxH) Width incl. cheek: 600 mm Cheek height: 100 mm Conveyor length: 2,205 mm Conveyor width: 500 mm Curve (degrees): 90° Curve radius, inside: 950 mm Curve radius, outside: 960 + 600 mm Roller type: Steel Rollers per axle: 1 piece Roller length: 500 mm Roller pitch, inside: 95 mm Roller pitch, outer: 151 mm Roller diameter: 50 mm Drive type: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 750 mm, roll pitch: 151 mm, total width: 830 mm, total height: 80 mm, total length: 2,410 mm, construction width: 830 mm, construction height: 80 mm, Item no.: 1000003704 Technical Data: Manufacturer: unknown Year of construction: unknown Overall dimensions: approx. 2,410 x 830 x 80 mm (LxWxH) Width incl. cheek: 830 mm Cheek height: 75 mm Conveyor length: 2,410 mm Conveyor width: 750 mm Curve (degrees): 90° Curve radius, inside: 880 mm Curve radius, outside: SUM=(830+880) mm Roller type: Steel Rollers per axle: 1 piece Roller length: 750 mm Roller pitch, inside: 78 mm Roller pitch, outer: 151 mm Roller diameter: 50 mm Nledpfsd Ndbqsx Aa Isc Drive type: Gravity Special features: ... Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, roll diameter: 60 mm, roll width: 870 mm, roll pitch: 150 mm, total width: 952 mm, total height: 200 mm, total length: 2,395 mm, conveying length: 2,395 mm, construction width: 952 mm, construction height: 200 mm, TAF item number: 1000005560 Manufacturer: unknown Year of manufacture: unknown Nlodpoxca Ecsfx Aa Ioc Overall dimensions (LxWxH) in mm: 2,395 x 952 x 200 Width incl. side panel in mm: 952 Side panel height in mm: 80 Conveyor length in mm: 2,395 Conveyor width in mm: 870 Conveyor height in mm: 90 Roller pitch in mm: 150 Substructure (rollable or with fixed supports): none Support roller axle type: IGM Support roller diameter in mm: 60 Brake roller diameter in mm: 90 Support roller per axle: 1 Support roller material: steel, galvanised Drive: gravity Net weight in kg: Special features: incl. brake roller and separation Condition: used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 700 mm, total width: 790 mm, total height: 110 mm, total length: 2,800 mm, conveying length: 2,800 mm, construction width: 790 mm, construction height: 110 mm, TAF article number: 1000004055 Manufacturer: unknown Year of construction: unknown Overall dimensions: approx. 2,800 x 790 x 110 mm (LxWxH) Cheek width: 790 mm Cheek height: 100 mm Conveyor length: 2,800 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 120 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK Nledpfxet H Im Ao Aa Ioc

Condition: used, Electric motor, three-phase motor, brake motor -Manufacturer: Weiss, electric motor with brake -Type: 5.5AZK 90L-8T B14P140 Nlsdjm Dyicopfx Aa Ioc -Power: 0.55kW -Speed: 675 rpm -Brake: 20 Nm -Shaft: Ø 24 x 50 mm -Construction: B3 -Protection class: IP 55 -Number: 2x motor available -Price per piece -Dimensions: 385/175/H230 mm -Weight: 19.4 kg/pc.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Nledpfxow Hz Trj Aa Ioc Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Nedpfjw Strcex Aa Ijlc Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): Nljdpfx Ajw R Rt Ija Isc At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: Nlsdpjyi Ezkofx Aa Ijc - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: as good as new (ex-display), Year of construction: 1997, machine/vehicle number: 1MB241H-6D-A111-A1, spindle speed (max.): 5,000 rpm, input voltage: 380 V, overall weight: 400 kg, power: 18 kW (24.47 HP), Spindle from Weiss GmbH, type 174405B, year of manufacture 1997. Unused, stock. For further details see type plate / pictures. Nlodpfx Astq H Suja Ijc Packaging and loading included.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Nljdpfx Aex Ig Tmja Isc Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Year of construction: 2013, condition: used, Rotary Indexing Table Rotary Table Rotary Drive Welding Positioner Positioning Table WEISS TYPE: CR700 CAA Year: 2013 Rotary indexing table/positioning table with control cabinet including frequency inverter and PILZ PLC control. Diameter of mounting plate approx.: 700 mm Diameter of inner collar approx.: 320 mm Height without base approx.: 290/320 mm Nsdpfx Aaexdv N He Iolc Base diameter approx.: 1600 mm Base height approx.: 190 mm Max. dynamic axial force: 70,000 N Weight approx. 585 kg plus base There are 4 pieces of these rotary drives from Weiss available. For further details or purchase of multiple rotary drives: Please enquire.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Nljdpfx Aaexbgg Ro Ioc

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Nodexctw Sopfx Aa Ijlc

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Nlsdpexcty Tofx Aa Ioc

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Nledpfxexbgfmo Aa Ijc

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Nledpsxbgfgjfx Aa Ioc For technical data, see illustration.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. Nlsdpfxex R N Ure Aa Isc In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: Nlodpjzdzmkjfx Aa Ioc 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Njdpfx Aaortrxie Iolc Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.