Used Winter Double End Profiler for sale (22,862)

Condition: used, Year of construction: 1976, Profile bending machine Gsdoytn E Topfx Aqgjuh IRLE - B 160 HH Technical data on photo

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Gujdpfx Aqjzxw E Esgsh Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, 35 mm 35 mm bar material dia. max. 70 x 2 mm rectangle 60 x 60 x 3 mm flat steel 60 x 10 mm Axis diameter 50 mm work speed 4,3 m/min total power requirement 1,5 kW weight of the machine ca. 0,4 t Gedpfx Aqjk Dvhhegeuh dimensions of the machine ca. 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven

Condition: new, Year of construction: 2026, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW Gusdpfegh T Iasx Aqgoh - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, PIPE AND PROFILE BENDING MACHINE This new pipe and profile bending machine is designed for the efficient forming of round and rectangular tubes, as well as round and square solid bars. Its robust construction, compact dimensions and 2.2 kW motor make it a practical solution for metalworking workshops, fabrication companies and industrial production facilities. The machine is suitable for producing curved components used in steel structures, frames, railings, gates, furniture, architectural elements and a wide range of custom metalwork applications. MATERIAL CAPACITY Round tube: up to 70 x 2 mm Guodpsytffwofx Aqgsh Rectangular tube: up to 60 x 60 x 3 mm Round solid bar: up to 35 mm Square solid bar: up to 35 x 35 mm TECHNICAL SPECIFICATIONS Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 400 V, three-phase Machine dimensions (L x W x H): 900 x 850 x 1700 mm Machine weight: 450 kg KEY ADVANTAGES Suitable for tubes, profiles and solid bars Wide material capacity Robust and stable construction Compact machine footprint Simple and convenient operation Suitable for workshop and production use New and fully operational machine DOCUMENTATION AND SERVICE 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English DELIVERY We can arrange delivery of the machine directly to the customer. Transport costs are calculated individually according to the delivery destination and the carrier’s quotation. Please contact our sales department to receive further information, a commercial offer or an individual transport quotation. Visit our website to explore our complete range of metalworking machines and equipment.

Condition: new, 30 / 900 mm 30 / 900 mm L-beam 35X35X5 / 600 mm T - beam - web outwards 50x6 / 600 mm Axis diameter 40 mm work speed 4,5 m/min roll diameter 148 mm total power requirement 1,1 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,75 x 0,6 x 1,4 m Guodpfx Aqeq Adtqjgsh Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 " - Operation manual - Foot switch left / right and EMERGENCY STOP

Condition: good (used), profile bending machine Gedpfxswtph Do Aqgsuh

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Gedpfxsycu E Es Aqgeuh Height:2200mm Weight:2900kg

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Gsdpfx Aod N Ahdsqgsuh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Gedpfozzw Uljx Aqgjuh Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are hydraulically driven - Three rollers are powered - Hydraulically adjustable guide rollers - 2 digital displays - Braking motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop Gusdpfsg Sr I Usx Aqgsh - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Gusdpfxowt Sy Aj Aqgeh Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: as good as new (ex-display), Year of construction: 2026, shaft diameter: 60 mm, bending machine model AHB 60 Gedpfx Asdkxvmoqgsuh ZOPF - three roller driven - two hydraulic adjustments - 2 digital readout with memory - standard roller set - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: good (used), functionality: fully functional, Plate Rolling Machine XZPP 100/16 Shaft diameter: 100 mm Roll diameter: 450 mm Max. strength of rolled material: 392 MPa Rolling speed: 0-6 m/min Gujdpey D A Nvsfx Aqgoh Total machine power: 11 kW Machine dimensions (L x W x H): 1570 x 1434 x 1578 mm Machine weight: 3950 kg

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60/3 MD - year of construction 2026 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase Guedpsgh T Hkefx Aqgoh - including basement horizontal and vertical

Condition: new, 75 (800) mm 60 (750) mm L-beam 80 x 80 x 8 (800) mm T - beam - web outwards 100 x 11 (1000) mm Axis diameter 80 mm work speed 6,0 m/min Tool diameter 242 mm total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left Guodpfxsfv H Eze Aqgeh - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Gedjglaq Iepfx Aqgjuh Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: new, Ring and profile bending machine Akyapak APK 81 I-beam – upright 100 x 20 (d 2100) mm Tube diameter max. 100 x 3 (d 3000) mm Angle iron 80x80x8 (d 2000) mm Square stock 50 x 25 x 2 (d 600) mm I-beam – flat 120 x 30 (d 600) max. 140 mm Solid material – diameter 60.0 (d 1000) mm Tool holder 80.0 mm Guedsd R Iqujpfx Aqgoh Rotation speed 4.2 m/min Weight 1,600 kg Dimensions L-W-H 1240 x 1375 x 1540 mm Features: Hydraulic roller drive Planetary gearbox for feeding the 2 lower rollers For extra small bending radii Hardened tool holder (42CrMo4) Standard roller set, hardened Mobile control panel 3 driven rollers Digital display Machine can be used horizontally and vertically CE marking / Declaration of Conformity Operating manual in German

Condition: new, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool holder, shaft: 80mm Guedpfoh T Ulnox Aqgsh Tool: 245mm Working speed: 4.5m/min Motor: 4kw Hydraulics: 30 tons Dimensions L-W-H: 1450x1050x1800 mm Weight: 1400kg 3 driven rollers Hardened standard rollers Hardened and ground tool holder, shaft Mobile control panel Horizontal and vertical working position Digital display Complies with CE standards

Condition: used, Pipe bending machine, mandrel bending machine, bending machine for pipes and profiles Pipe bending unit with Siemens servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round pipe Ø 15.4 x 0.8 mm, R60mm - interchangeable bending tools and bending dies - drive of the bending tool via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - pneumatic height adjustment of the bending die via Festo pneumatic cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm Weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. Gusdpfx Aqed E A I Ijgsh 5 pieces available in left-hand version. The stated price refers to 1 piece of bending unit with servo motor. If required, we also sell individual components of the bending unit. We also offer the electrical components for controlling the servo motor. We also have hydraulic units for sale.

Condition: new, Ostas Profile Ring Bending Machine OPK 85 Technical specifications: • Tool holder, shaft: 80mm • Tool: 245mm • Working speed: 6m/min • Motor: 4kw • Dimensions L-W-H: 1020x1460x1350mm • Weight: 1800kg Guodpfsfig A Nox Aqgsh • 3 driven rollers • Hardened standard rollers • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Side angle guide rollers • Digital displays (2 pcs.) • Brake motor • Compliant with CE standards

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Gsdpexn I Rwefx Aqgjuh

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 60 mm, overall weight: 1,080 kg, Equipment: documentation/manual, emergency stop, hardened rollers, - Ring bending machine Gsdpogg N Amofx Aqgouh - Shaft diameter 60 mm - The two lower rollers are hydraulically moved - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: new, Shaft diameter 40 mm Godpfx Aqeyn R Ugogjuh 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Condition: new, Ostas Profile Ring Bending Machine OPK 105 Technical Specifications: • Tool holder, shaft: 100 mm • Tool: 315 mm • Working speed: 7 m/min • Motor: 7.5 kW • Dimensions L-W-H: 1980 x 1450 x 1650 mm • Weight: 3130 kg • 3 driven rolls • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working positions • Side angle guide rolls Guedpfx Asxrd H Noqgoh • Digital displays (2 pcs.) • Brake motor • Compliant with CE standard