Used Wipa Pressure Blower 7.5 Kw for sale (45,596)

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Dimensions: 375/335/H385 mm Iisdey Tubpspfx Amgeh -Weight: 30.7 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 7.5 rpm Iiodjc Np A Nspfx Amgoh -Power: 0.55 kW -Construction: B5 -Diameter shaft: 50 mm -Protection class: IP 55 -Brake: 24 V -Dimensions: 820/320/320 mm -Weight: 100 kg

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Iedpfjfz A D Nsx Amgsih • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. Iisdpfx Amsxxx Ubsgsh - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Iiedpfsx Ihg Ijx Amgjh Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, mileage: 479,000 km, power: 350 kW (475.87 HP), first registration: 04/2015, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, * Our internal number: 1004 * S 517 HD * First registered 04/2015 * Clean vehicle * 350 kW / EURO 6 (large engine) * INFO: Currently: 57-seater -> can be expanded to a total of 61 seats according to the vehicle documents. * ..... * NEW TACHOGRAPH - Generation 4.1 installed in August 2025 * Excerpt from the repair history: * Major air conditioning service performed in 06/2026 at EVOBUS (invoice available) * Exhaust cooler replaced at EVOBUS (invoice available) in 06/2026 * Exhaust cooler lines renewed at EVOBUS in 06/2026 * Oil pan sealed at EVOBUS in 06/2026 * Invoice for EUR 7,500 from EVOBUS is available. * TOTAL COSTS EVOBUS invoices: approx. EUR 27,000 * ..... * RETARDER replaced with control unit in August 2024 * Adaptive cruise control replaced in 10/2024 at Evobus workshop * All V-belts / idler pulleys / flat belts / tensioners, ... replaced * Oil change / air filter / diesel filter / ... replaced * Good tires - front axle Conti * Steering column switch replaced in 09/2024 * Retarder * Cruise control * Adaptive cruise control * AIR CONDITIONING * Auxiliary heater * TINTED WINDOWS * WC * 55+1+1 travel seats installed * (expandable to 59+1+1 seats, according to vehicle documents) * Adjustable rearward and sideways * Front matrix with control unit Iisdpfx Amswxkh Ajgjh * Alloy wheels * Reversing camera * ... * Vehicle registered and in operation * Mileage and condition may vary. * All information without guarantee * Subject to prior sale * We refer to our general terms and conditions

Condition: good (used), Reinhardt LTV 100 Oven, 200°C Iedexbf T Nopfx Amgoih Manufacturer: Reinhardt Type: LTV 100 Usable volume: 0.65 m³ Steam volume: 1.04 m³ Output: 10.56 kW Fresh air exchange rate: 1 l/min Loading system with 7 supports, size W x D: 770 x 850 mm Voltage: 380 V Operating temperature: 50°C - 200°C Nominal temperature: 130°C Dimensions H x W x D: 2050 x 1650 x 1180 mm Chamber: H x W x D: 1000 x 800 x 950 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2000, Colortronic CTT 30 Granulate Dryer For climate- and air-independent drying of thermoplastic granules and ground material before processing, in order to remove residual moisture from the inside and outside of the granules. Colortronic dry-air dryers operate according to the absorption principle. The air is not heated; instead, the moisture in the drying hopper is absorbed and removed. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Isdpfoxlrdcox Amgoih Main fuse: 25 A Year of manufacture: 7/2000 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multi-stage centrifugal pump with opposing suction and discharge nozzles (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal ensures high reliability and ease of maintenance. Power transmission is via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Isdpfswbfigox Amgsih Manufacturer's product group: Vertical centrifugal pumps Manufacturer's product range: Vertical centrifugal pump CRN Manufacturer's article number: 96122358 Connection, inlet side: Flange Connection, outlet side: Flange Connection standard, inlet side: EN 1092-2 Nominal diameter, connection, outlet side: DN 65 Design: Vertical Speed: 2924 rpm Motor output power: 11.0 kW Protection class: IP55 Max. head: 90.2 m Max. operating pressure: 16 bar Weight: 193.2 kg List price: €14,844.00 You can find more items in other sizes - new and used - in our shop! International shipping costs available upon request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Iiedpjwb A Hijfx Amgeh Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2014, 7.5 m Stow Pallet Rack Manufacturer: Stow Type: Pallet Rack System Rack length approx. 7500 mm Upright height: approx. 6000 mm Upright depth: approx. 1100 mm Upright type: PLFB 16P Clear bay width: 3600 mm Number of bays: 2 Number of levels: 4 (6 beams + ground level) Beam type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible bay load: 20000 kg Upright surface: blue painted (RAL 5015) Year of manufacture: 2014/2020 Scope of supply: 3 x uprights 6000 x 1100 mm, bay load 20000 kg, blue 12 x beams 3600 mm incl. safety pins, shelf load 4000 kg, orange Item location: Geisleden Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or the dismantling of a warehouse – we take over the professional assembly and disassembly of your systems: Iisdjydnuvopfx Amgjh - Pallet racks (heavy-duty & standard) - Shelving racks for small parts and archives - Warehouse platforms for optimal use of space Rack testing & inspection according to DIN EN 15635 Safety is a legal requirement. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load labels. - Creation of a legally sound test report including a test label. We would be happy to offer you a suitable bank financing option for your project. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Low-speed machine with gearbox Cutting width – 250 mm Motor power – 3 kW Rotor speed – 100 rpm Number of rotor knives – 20 pieces Number of stator knives – 2 pieces 3 units available, in perfect condition Capacity up to 50 kg/h Price: 1550 EUR per unit Iisdoyf I Tbopfx Amgoh

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades 2 stator blades Blade inlet: 220 x 180 mm Power: 3 kW Iisdpfx Amsv Nnr Iogsh PRICE REDUCTION FROM 1150 TO 950 EUR!!!

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Power 120 kW Iijdpfjvyrxgjx Amgsh Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: excellent (used), ELIN EBG 3-phase motor, water-cooled electric motor, 75 kW Iodex Uqu Ijpfx Amgsih

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). Iijdpfx Aexv Dv Esmgoh - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: excellent (used), Year of construction: 2007, COMPAIR LS 11 screw compressor Capacity 1.41m3/min 11 KW motor 10 bar pressure Iiedpfx Amsnh N Ikjgeh Year of manufacture 2007 The compressor is fully functional.

Condition: new, Wilo CronoLine-IL 50/270-4/4-S1 Single-Stage Dry-Running Centrifugal Pump. Single-stage dry-running centrifugal pump in inline design for pipe installation or base mounting. Low-vibration and low-noise block design with lantern and rigidly connected standard flange motor (standard motor). With forced circulation, direction-independent bellows mechanical seal and cavitation-reducing impeller. Flanges with pressure gauge connections R 1/8. Manufacturer: Wilo Product name: CronoLine-IL 50/270-4/4-S1 Net weight approx.: 101 kg Item number: 2171212 Operating data Min. medium temperature Tmin: -20 °C Max. medium temperature Tmax: 140 °C Min. ambient temperature Tmin: -15 °C Max. ambient temperature Tmax: 40 °C Maximum operating pressure PN: 16 bar Design note: 16 bar up to 120 °C, 13 bar up to 140 °C Minimum efficiency index (MEI): ≥0.4 Motor data Motor efficiency class: IE3 Mains connection: 3~400 V, 50 Hz Voltage tolerance: ±10 % Rated motor power P2: 4000 W Rated speed n: 1450 1/min Rated current IN: 8.2 A Power factor cos φ: 0.79 Motor efficiency ηM 50%: 85.8 % Motor efficiency ηM 75%: 87.6 % Motor efficiency ηM 100%: 88 % Insulation class: F Enclosure: IP55 Installation dimensions Suction-side pipe connection DNs: DN 50 Discharge-side pipe connection DNd: DN 50 Length l0: 440 mm Iisdpfxepgq Dkj Amgsh You can find more pumps – new and used – in our shop! International shipping costs on request!

Year of construction: 2010, condition: good (used), Güntner GVX 071V.1A/3-ED.E Axial fan condenser Fan: 500 mm diameter Number of fans: 3 Extra-quiet design Voltage: 400 V 3~ 50 Hz Year of manufacture: 2010 Max/Min pressure: 32 bar/-1 bar Max/Min temperature: -50 to +100 degrees Volume: 29 liters Rated power: 42 kW Air volume flow: 15000 m³/h Weight: 326 kg Iiodpfx Amspgraregjh Overall dimensions, approx.: L: 410 cm, W: 110 cm, H: 125 cm Item condition: used You can find more condensers – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink Tunnel SL 412/25 Iedpfep H T Iujx Amgsih 380 V 6/9 kW power Air circulation fan Cooling fan 2 x adjustable heater 1 x base heater 1 x auxiliary heater with chain conveyor Dimensions: Tunnel length: 120 cm Machine: L x W x H = 166 x 64 x 26 cm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Gardner Denver Vacuum Pump S-VSI 100 Dry-running, non-contacting screw vacuum pumps Simple maintenance. Suitable for industrial applications such as vacuum forming, metallurgy, and surface engineering. High efficiency due to stepped screw profile. Technical data: Suction capacity m3/h max. 100 at 50 Hz // 138 at 60 Hz Final pressure mbar (abs.) 0.1 Rated voltage 50 Hz/60 Hz: 230/400V ± 10% / 220/380V Motor power 50 Hz/60 Hz: 3 / 3.6 kW Current draw 50 Hz/60 Hz: 10.5 / 6.0 Speed rpm 50 Hz/60 Hz: 2880 / 3550 Weight: 190 kg Cooling water consumption: 1.8 l/min Operating hours: Between 321 - 14613 h Approximately 80% of the pumps have less than 4,000 operating hours. Since we have approximately 40 of these pumps, we will ship them randomly. Iiedpfx Ask Sgvcsmgjh 1x Gardner Denver Vacuum Pump S-VSI 100 You can find more items - new and used - in our shop! International shipping costs available upon request!

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma - Technical Documentation TECHNICAL PARAMETERS: shaft width: 630 mm detail thickness: 240 mm 4 shaft knives: Ijdpfx Asiq Dk Somgoih knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW electric height adjustment: two types of feed speed: dimensions (length/width/height): 120/128/125 cm weight: 1060 kg

Condition: new, Wilo Dry-Running Pump IPN50/180-7.5/2 AT, DN50 PN 16, Art. 307833 /2120882 Wilo Dry-Running Pump IPN50/180-7.5/2 AT, DN50 PN 16, 7.5 kW Max. 140 °C 2900 RPM Art. 307833 /2120882 The data listed below is identical to our previous model. Order Information Manufacturer Wilo Product Designation CronoLine-IL 50/180-7.5/2 Net Weight approx. 106 kg Article Number 2120882 Operating Data Conveyed Medium Water Medium Temperature T -20 °C Ambient Temperature T -15 °C Maximum Operating Pressure PN 16 bar Design Note 16 bar up to 120°C, 13 bar up to 140°C Minimum Efficiency Index (MEI) Hydraulic Data Minimum Efficiency Index (MEI) Max. Operating Pressure p 16 bar Maximum Operating Pressure PN 16 bar Min. Medium Temperature Tmin -20 °C Max. Medium Temperature Tmax 140 °C Max. Ambient Temperature Tmax 40 °C Design Note 16 bar up to 120°C, 13 bar up to 140°C Motor Data Mains Connection 3~400 V, 50 Hz Voltage Tolerance ±10 % Motor Efficiency Class IE3 Motor Rated Power P2 7.50 kW Rated Current IN 13.30 A Rated Speed n 2900 1/min Power Factor cos φ Motor Efficiency ηM 50% 88.9% Motor Efficiency ηM 75% 90.3% Motor Efficiency ηM 100% 90.1% Motor Winding up to 3 kW - Motor Winding from 4 kW - Insulation Class F Motor Protection Type IP55 Motor Protection No Materials Pump Housing 5.1301/EN-GJL-250 KTL-coated Impeller EN-GJL-200 (GG-20) Cast Iron Shaft Stainless Steel Mechanical Seal AQ1EGG Lantern 5.1301/EN-GJL-250 KTL-coated Iodpfxoivdz Ne Amgsih Condition: "New". Pumps from stock. Some are without the original box. May have dirt or storage marks/small dents. Unused, they appear good at the bores. There are no mounting marks. See pictures. Shipping with special/package/freight shipping. P4 More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Iedpohtyxlofx Amgoih Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Spandau screw spindle pump, 6.3 kW Power: 6.3 kW Voltage: 400/690 V Frequency: 50 Hz Flow rate: Qmax: 55 l/min Speed: 3525 rpm Iiodpferklfysx Amgjh Max. immersion depth: 262 mm More new and used pumps can be found in our shop! International shipping costs available upon request!