Used Wolmal Powder Coating Booth for sale (3,264)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 2,700 mm, total width: 2,490 mm, Hercules is a revolutionary, portable system for flame spraying coatings onto metal substrates, drip trays, containers, steel structures, concrete floors, and other surfaces. It represents the most efficient technology for corrosion protection through the application of a thermoplastic, environmentally friendly coating directly on site. Nsdpfx Aszarzlogrjlg

Condition: used, Year of construction: 2014, functionality: fully functional, workpiece height (max.): 1,500 mm, workpiece length (max.): 7,000 mm, ENGLISH: Powder Coating Line for Aluminum Profiles – Almost New, Fully Operational and Ready for Sale We are offering a complete automatic powder coating line by NYS Equipments Co., Ltd., very lightly used, fully operational, and currently in commercial production. This line is ideal for coating aluminum profiles up to 7,000 x 300 x 1,500 mm (L x W x H), with a production capacity of up to 15 jigs/hour. Key Technical Features: ✅ Process: Automatic electrostatic powder coating with 16 automatic and 4 manual corona-type guns Nsdowvaaiopfx Agrelg ✅ Curing Oven: Gas-fired heating (RIELLO), 700,000 kcal/h capacity, internal dimensions 11.1 x 7.8 x 2.59 m, PID temperature control with ±2 °C precision ✅ Drying Oven: Gas heating (200,000 kcal/h), internal dimensions 8.0 x 1.5 x 2.3 m ✅ Conveyor System: Dual chain design with adjustable jigs (2,250 mm spacing), automatic lubrication, and drive motor of 3.75 kW with adjustable speed (0–6 m/min) ✅ Powder Recovery System: Cyclone and after-filter recovery system with automatic vibrating sieve and 24 long-fiber filters. Fan flow rate up to 19,263 m3/h, automatic reverse air cleaning ✅ Control System: PLC with touch-screen interface, fully automated monitoring and control of spraying, curing, and recovery. Additional Advantages: – Currently in commercial operation, available for inspection and staff training – Sale is “as is, where it is” – Disassembly and transportation are not included, but can be organized on-site Price: €60,000 SRPSKI: Linija za elektrostatsko plastificiranje aluminijumskih profila – skoro nova, potpuno ispravna i spremna za preuzimanje Prodaje se kompletna automatska linija marke NYS Equipments Co., Ltd., vrlo malo korišćena i u odličnom tehničkom stanju, koja se i trenutno nalazi u komercijalnoj proizvodnji. Linija je idealna za obradu aluminijumskih profila maksimalnih dimenzija 7.000 x 300 x 1.500 mm (DxŠxV) i kapacitetom do 15 nosača/h. Osnovne tehničke karakteristike: ✅ Proces: automatsko elektrostatsko nanošenje praha sa 16 automatskih i 4 ručna pištolja (Corona tip) ✅ Peć za polimerizaciju: gasno grejanje (RIELLO) kapaciteta 700.000 kcal/h, PID kontrola temperature sa preciznošću ±2 °C, unutrašnje dimenzije 11,1 x 7,8 x 2,59 m ✅ Sušara: gasno grejanje kapaciteta 200.000 kcal/h, unutrašnje dimenzije 8,0 x 1,5 x 2,3 m ✅ Transportni sistem: dupli lanac, razmak između nosača 2.250 mm, pogonski motor 3,75 kW, automatska kontrola brzine (0–6 m/min), sistem automatskog podmazivanja ✅ Reciklažni sistem praha: ciklon + after-filter sa automatskim vibracionim sitom, kapacitet ventilatora do 19.263 m3/h, filtracija 24 filtera (long fiber), automatsko čišćenje reverznim vazdušnim mlazom ✅ Kontrola: PLC sa touch-screen komandnim panelom, kompletan nadzor i kontrola procesa (kretanje transportera, temperatura peći, reciklaža) Pogodnosti: – Linija spremna za preuzimanje „viđeno–kupljeno” (it is, as is, where it is) – Mogućnost probe i obuke osoblja pre preuzimanja – Demontaža i transport nisu uključeni u cenu, mogu biti organizovani na licu mesta Cena: 60.000 €

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections. Nodez Azx Rspfx Agrelg

Condition: new, Year of construction: 2026, functionality: fully functional, This system pertains to an industrial oven with overall dimensions of 5000 × 2500 × 3200 mm, engineered to provide high-performance thermal processing with maximum efficiency and reliability. The unit features a gas-fired boiler system integrated with three high-performance electric motors, ensuring optimal power delivery and consistent operation under demanding conditions. These are coupled with three Ø452 mm impellers, specifically selected to achieve superior airflow characteristics and maximize mechanical efficiency throughout the chamber. The oven structure is fully enclosed with 180 mm thick high-resistance insulated panels, designed to minimize thermal losses, ensure energy efficiency, and provide complete chamber sealing. This construction guarantees stable internal temperature conditions and optimal process control. Additionally, the system includes an advanced control panel interface that supplies all essential operational data and adjustment functions. The interface is developed with a focus on user accessibility and ease of operation, enabling standard personnel to efficiently manage the system without compromising precision or performance. Nledpfx Ajyzw E Hsgrsg

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Nledpfxszi D T Do Agreg Condition: new/unused, 0 working hours

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm Nlodpoffv Tpefx Agreg 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg XL 75 - 4 + L X – 2019 Serial Number : LS001746 Year of Manufacture : 2019 Nljdpfx Aoz Du Hhegrjg Impression Count : 100 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER XL 2 • INPRESS CONTROL 2 (Inline Color and Register Measurement System) • AUTOPLATE PRO (totally automatic plate change) • WALLSCREEN XL • SPEED : Option 18.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in France

Year of construction: 2018, condition: ready for operation (used), table load: 35 kg, number of axes: 3, This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details. • Conveyor • Type: Overhead monorail conveyor (frequency inverter driven) • Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min) • Reciprocator (application axis) • Max vertical stroke: 2,200 mm (adjustable) • Vertical speed: 0.14 to 0.6 m/s (adjustable) • Positioning movement: Manual adjustment • Part capacity • Workpiece material: Metal • Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm • Gauge clearance (W x H): 300 x 2,200 mm • Max load: 35 kg per 800 mm hanger rack • Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min • Powder application system • Brand/Model: Nordson Encore LT • Reciprocators: 2x electronic reciprocators • Automatic guns: 4x automatic powder guns with individual control modules • Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning • Air velocity at openings: approx. 0.5 m/s • Line components and thermal equipment • Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves • Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans • Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan • Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ) • Max operating temperature: 180°C • Utilities and technical requirements • Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz • Total electrical power: 90 kW (approx. 80 kW line requirement) • Electrical consumption: ~80% (excluding application booth) • Heating fuel: Natural gas • Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery) • Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application) • Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet • Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage Nledpfez A T Rpsx Agrsg Additional equipment • 1x Manual powder gun with integrated rack control unit • 1x Complete sieving unit with 10 m feed hose • 1x 36 kg powder hopper • 1x Recovery venturi pump

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, warranty duration: 12 months, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Complete powder coating system (curing oven 3.2m + spray booth + Wagner/Gema application + conveying system) Like-new, complete powder coating system including a 3.2m electric/gas curing oven, mobile spray booth, Wagner or Gema application + hanging conveying system (200 kg). Ready for immediate use and flexibly expandable! Customer-specific adjustments possible upon request. Maximum flexibility and efficiency for your surface coating Are you looking for a reliable, high-performance, and immediately usable complete solution for powder coating? This complete powder coating system combines top-class industrial components into a perfectly coordinated overall system. Whether for single-part production, small series, or contract coating – the system offers you the ideal combination of high coating quality, low energy consumption, and well-thought-out material flow. The heart of the system is the generously sized electric or gas curing oven with a usable space of 3.20 x 1.40 x 2.00 [m]. The indirect heating via the integrated stainless steel thermal block and the powerful air circulation ensures excellent, homogeneous temperature distribution, which reliably prevents coating defects. The system is complemented by a mobile spray booth, which guarantees maximum flexibility in the hall area due to its design. Together with the proven Wagner/Gema handheld unit, you can apply a wide variety of powder coatings (from standard organic to metallic) precisely and economically. The included C-rail system, with its approximately 27 meters in length and a load capacity of 200 kg per carrier, ensures smooth, ergonomic transport of your workpieces between coating and curing. Nlodpfx Aob Dxnwsgrjg Important: Does the system not fit 1:1 into your hall? Individual adjustments are possible! Each production facility has its own requirements regarding space, component sizes, and processes. This system can be flexibly adapted to your specific conditions on site. - Tailored dimensions: Oven dimensions or booth sizes can be modified on request. - Expansion of the conveying system: Adjustment of the rail system (layout, switches, usable lengths) to your hall geometry. - Special equipment: Integration of additional components such as pre-treatment, extended control technology, alternative heating methods, or a higher degree of automation. Just contact us! We will examine your layouts and put together a customized configuration for you. Technical data (quick overview) - Condition: New / Unused - Oven interior dimensions (L x W x H): 3,225 x 1,400 x 2,000 [mm] - Max. oven temperature: 220°C - Oven heating capacity: 39 kW (electric or gas, indirect via stainless steel thermal block) - Oven air circulation capacity: 4,500 m³/h - Spray booth dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Booth extraction capacity: 6,000 m³/h; 3 kW - Conveying system: Manual rail system (C-rail, max. 200 kg / carrier) - Powder gun: WAGNER or GEMA Your contact person & contact Do you have questions about the system, would you like a technical data sheet/offer, or would you like to check how the system can be optimally integrated into your production chain? Contact us now without obligation! We will be happy to advise you on technical details, customization options, and delivery conditions.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 8,500 kg, Year of construction: 2004, operating hours: 12,500 h, For sale: TEREX/SCHAEFF 905M excavator. Operating hours: approximately 12,500 hours. Year: 2004 Machine weight: 8.5 tons. Requires repair due to a leak near the hydraulic motor. Oil and filter changes were always performed on time. The excavator operated for 2-3 hours per day for two years. Wheels have been recently sandblasted and powder-coated, and new aprons, inner tubes, and tires have been installed. The price includes a ditching bucket and a digging bucket. Nledpfxsz D Au Te Agreg The Hammer grapple is not included in the price. More information is available by phone or email.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 250 kg, Manual powder coating system, suitable for gas cylinder coating Nsdpfx Agswhbvperslg

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Description Professional powder coating plant in excellent condition, available from Q4 2024. Specifications: Furnace dimensions: 20 meters long x 5.5 meters wide Transport chain in oven: 45 meters long (Z-shape) Heating: 2x indirect gas burners of 300 kW each Nodpfxsrpllcj Agrslg Automation: Automatic doors Year of construction: 2013 Price: €72,000 (excluding disassembly and transport)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total length: 24,000 mm, total height: 4,200 mm, type of input current: AC, warranty duration: 12 months, workpiece weight (max.): 9,500 kg, power: 48 kW (65.26 HP), input voltage: 380 V, temperature: 20 °C, input frequency: 50 Hz, heating capacity: 6 kW (8.16 HP), inner dimension length: 24,000 mm, inner dimension width: 4,200 mm, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, waste water connection: 100 mm, feed length Y-axis: 16,000 mm, energy consumption: 42 kWh, insulation material: Steinwolle, insulation thickness: 50 mm, nominal power: 48 kW (65.26 HP), output voltage: 380 V, sheet thickness steel (max.): 3 mm, type of output current: AC, tank capacity: 4,000 l, number of previous owners: 1, number of chambers: 4, Equipment: lighting, This is a pre-treatment system in which metal parts are automatically cleaned using a spray process. Nlsdpfjzd Sm Ijx Agreg

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay. Njdpfx Agowzmcborelg

Condition: new, 🚀 Modular powder coating systems with rod transport system Our modern coating systems with rod transfer systems offer maximum flexibility while minimizing space and energy consumption. All process steps – from pretreatment to oven drying – can be implemented in a continuous line. Njdsdy Ezdepfx Agrjlg 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Curing and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-driven Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic and walk-in coating booths The movement is fully automatic with a continuously variable drive, which enables precise control of the cycle times. 🏗️ Structure & components: Single-rail conveyors for longitudinal movement Transverse guide units for changing direction Movable carriages with product holders Supporting steel structure for permanent load Control via control panel with speed regulation ⚙️ Efficiency through well-thought-out design The system allows for non-contact handling – the workpiece is hung onto the loading station and remains in the same position until it is removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated rod lifting device enables ergonomic and safe working with heavy parts. The staff can position the lifting rod precisely by pressing a button (raise/lower) – ideal for large components. ✅ Your advantages at a glance: Fully automatic material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfectly suited for modern coating processes where flexibility, ergonomics and efficiency are the focus. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Year of construction: 2004, condition: used, functionality: unexamined, Semi-automatic flocking system Manufacturer: AIGLE Macchine srl The system is used to coat various materials. It can also be used as a painting system. In this particular case, the interior parts of car glove boxes were coated. The glove boxes were hung on a conveyor belt and first sprayed manually with glue. The boxes were then sprayed with flocking material in the individual flocking booths. The spray direction changes depending on the station. After the 4 flocking booths there are 2 cleaning booths. The blown, unbonded fibers are then reintroduced into the coating process via the flock distribution system. Similarly, the unbonded fibers from the four flocking booths are returned to the process. Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Lock door Width: approx. 880 mm Height: approx. 750 mm Productivity: 1000 - 1500 pieces in 8 hours depending on shape and materials Voltage: 400 Volt 50 Hz Installed electrical power: 26 kW Electric power supply: 480 V 60 Hz Nodpfx Aov Izr Esgrjlg Space requirement for chain belt flocking system approx. 16 x 5 m Machine dismantled and assembled in the warehouse. The machine was operational until the last day of operation.

Condition: used, Year of construction: 2023, machine/vehicle number: 230804/9440, overall weight: 133 kg, total width: 697 mm, total length: 1,210 mm, total height: 1,350 mm, input voltage: 240 V, tank capacity: 200 l, input current: 13 A, input frequency: 50 Hz, Equipment: type plate available, Freddy ECOVAC 200 industrial coolant vacuum and recycling unit, manufactured in 2023 by Freddy Products Limited, United Kingdom. The Freddy ECOVAC is designed for vacuuming coolant from machine tool sumps, machine beds, drip trays, conveyors, and shop floors, while simultaneously separating metal chips and swarf and returning the cleaned coolant for reuse. Unlike a standard industrial vacuum cleaner, the ECOVAC is specifically designed for coolant recovery and recycling and uses an independent pump for coolant return. Technical data: Manufacturer: Freddy Products Limited Model: ECOVAC 200 Year of manufacture: 2023 Serial number: 230804/9440 Tank capacity: 200 liters Power: 3 kW Voltage: 240 V Power supply: single-phase Frequency: 50/60 Hz Input current: 13 A Empty weight: approx. 133 kg Dimensions: - Length: approx. 1,210 mm Nledpoz Dx Tljfx Agrjg - Width: approx. 697 mm - Height: approx. 1,350 mm Country of manufacture: United Kingdom CE marked UKCA marked Equipment and features: - 200-liter coolant tank - independent coolant return pump - 37-liter perforated steel basket - flexible suction hose - metal suction lance - wide floor suction nozzle - additional tools and hoses - mobile design with castor wheels - steel construction with oil- and acid-resistant powder coating Main applications: - CNC machining centers - lathes and milling machines - machine tool coolant sumps - production plants - maintenance departments - industrial workshops Advantages: - recovers and reuses coolant - helps reduce coolant consumption - removes chips and swarf from coolant - helps extend coolant life - reduces waste disposal costs - improves machine and workplace cleanliness - helps reduce bacterial growth and contamination in coolant systems Condition: Used machine in very good technical and visual condition. The unit is complete and ready for use. Inspection and functional test are possible before purchase. Sales information: VAT invoice available. Transport can be arranged throughout Poland and Europe after prior agreement. Additional photos, video, and transport quotation are available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, Specifically designed for small businesses and wheel coating operations. Complete system consisting of: Powder curing oven, dimensions: width x height x depth 1200 x 1600 x 1200 mm, 15 kW Powder coating booth, dimensions: width x height x depth 2000 x 2240 x 920 mm Latest powder spray gun from the ROMER ProfiSpray series All together for 17,990.00 net, plus shipping and installation. Nsdpfxsg Ngt Ne Agrjlg

Year of construction: 2024, condition: new, functionality: fully functional, Forced-air curing oven Powder coating oven NEW SLS-90/O * D+t Through-feed oven, divisible Working dimensions: 1400 width x 2000 height x 6500 depth Overall dimensions: 1920 width x 2810 height x 6800 depth Nlodpfjcutrlox Agrsg Power supply: Electric Rated power: 90 kW Voltage: 380V Frequency: 50-60Hz Door type: 2 doors on each side - through-feed oven Anti-explosion lock Warm-up time: 15-30 min. (180 °C) Homogeneity: < ± 3 °C at 180 °C Max: < ± 3 °C Maximum temperature: 230 °C Transport: optional Air circulation: Forced air Heaters: Interchangeable roof heating panels Airflow: Vertical Fan: Radially mounted on interchangeable panels Door: Double, two doors on two sides (through-feed oven) Divisible Motor power: 1.1 kW Capacity: 6480 L Warranty: 12 months GERMAN-SPEAKING CONTACT PERSONS IN GERMANY FEEL FREE TO INQUIRE Delivery time: approx. 12 to 16 weeks after order Shipping costs are calculated individually. We also offer systems tailored to your requirements. More information at Romer Germany Powder coating, electrostatic painting, Powder Coating, Powder painting, plastic powder, Peinture en poudre, thermoplastic, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування, powder coating booth powder coating system powder coating plant powder coating booth for powder coating surface technology powder gun powder guns curing oven powder coating oven industrial oven INDUSTRIAL OVEN, forced-air curing oven, powder coating oven

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Nledpfx Agounaqvereg Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Nlsdpozwxansfx Agreg Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. Nledpfxoyzw Hws Agrog 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 250 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Industrial Powder Coating Ovens – Flexible Designs, Sizes & High-End Upgrade Options Are you looking for a powerful, reliable, and efficient curing oven for your powder coating process? We provide customized solutions for every application – from compact chamber ovens to fully integrated conveyor systems! Versatile designs for every process: No matter how your production is organized, we offer the right oven concept for your material flow: - Chamber ovens: Classic design with single-sided doors for batch loading. - Tunnel ovens: Practical pass-through solution with doors on both sides for an optimized loading and unloading process. - Special ovens for conveyor systems: Specifically designed ovens for continuous production processes, perfectly adapted to automatic conveying technology with a conveyor chain. - Flexible door systems: Depending on space and requirements, optionally equipped with swing doors or space-saving sliding doors. Your oven, tailored to your needs – Standardized performance or 100% custom design: Our standard model range: - Flexible dimensions: Standard internal lengths up to 6.5 m with selectable internal widths of 1.7 m or 1.9 m (standard height: 2.0 m) - Heating according to choice: Fully flexible, available as an electric version or with an efficient gas burner - Versatile loading: Standard preparation for use with rack cars or for integration into a conveying system Individual customized solutions: - Free dimensions & geometries: We manufacture any desired special size, deviating construction heights, or complex spatial geometries exactly according to your specifications - Special heating concepts: Specific burner outputs or adapted heating zones for complex component requirements - Special conveying technology: Tailored integration for integrated overhead conveyor chains, automatic indexing conveyors, or individual crane and lifting systems Smart additional options & upgrades: - Automatic door control: Convenient, automatic opening and closing for sliding doors - Inverter control of the circulating air: When the doors are open, the fan speed is automatically reduced. This prevents the warm air from blowing out, noticeably minimizes energy loss, and saves money. - Temperature curve recording: Complete recording and logging of the curing process for quality and process documentation - Extended sensors & temperature monitoring: All of our ovens have a highly precise, uniform temperature distribution of ±5°C. For the highest quality standards, additional sensors can be integrated upon request to document the homogeneity in the entire oven chamber in detail. Technical highlights of our ovens: Nedpfefhv Tlsx Agrjlg Maximum efficiency: High-quality 150 mm rock wool insulation for minimal heat loss Powerful circulating air: High-performance fans for perfect heat distribution and uniform curing results Higher temperature ranges: Maximum operating temperature up to 250 °C Durable & robust: Stainless steel thermo-block with integrated overheating protection and heat-resistant bearings Including control: Complete electrical control included in the scope of supply Contact us! We offer free consultation. We plan and manufacture your powder coating oven exactly as you need it for your production.

Year of construction: 2011, condition: ready for operation (used), The Thermo Max Q 6000 Incubator Shaker is a stackable, generously sized incubator, with orbital shaking. Designed to promote cell growth by providing a controlled environment with continuous agitation, the Max Q 6000 ensures proper oxygenation and prevents cell settling. Features of the Max Q 6000 include a temperature range of between 10°C – 80°C, and a speed range of between 15 – 500 rpm. Three bright LED screens display speed, time and temperature, and the control panel is user friendly with a simple design. Operation can be run in continuous or timed modes, from 0.1 hour to 999 hours, or 0.1 minute to 999 minutes. Furthermore, up to 25 x 250 ml flasks can be accommodated, with 2 x height adjustable shelves and a lower platform. For safety, the Max Q 6000 has an over-temperature feature and an interlock which stops the shaking motion when the door is open. Inner chamber dimensions for the Max Q 6000 are 55.9 x 53.3 x 68.6 cm. Externally, the Max Q 6000 is powder coated with cold-rolled steel construction, and measures 83.8 x 69.8 x 102.8 cm. Key Features of the Thermo Max Q 6000 Incubator Shaker Stackable RS232 Interface Solid State Brushless DC Motor Capacity: 25 x 250 ml Flasks Operation: Continuous Or Timed LED Displays: Temperature/Time/Speed 2 x Adjustable Height Shelves Temperature Range: 10°C – 80°C Nedoz Etl Sepfx Agrjlg Speed Range: 15 – 500 rpm (unstacked) 15 – 300 rpm (stacked) Max Load: 9.1 kg (shelf) 15.9 kg (platform) Platform Dimensions: 45.7 x 45.7 cm Inner Chamber Dimensions (L x W x H): 55.9 x 53.3 x 68.6 cm External Dimensions (L x W x H): 83.8 x 69.8 x 102.8 cm Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Nsdjx R Umtepfx Agrslg Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines