Used Xeikon 3500 for sale (2,082)

Condition: used, Year of construction: 2006, gearing type: other, first registration: 01/2006, color: orange, overall weight: 12,000 kg, mileage: 1,001 km, empty load weight: 2,000 kg, maximum load weight: 10,000 kg, driver cabin: other, Vehicle location: Bovenden, Iedpfx Anexq E T Uj Hjif Body: Demountable salt spreader approx. 5 m³, mounted on a hooklift frame! Unladen weight approx. 2,000 kg! Salt spreader approx. 5 m³. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, interim sale, and errors reserved!

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. Isdpjyzr Nmofx An Hsif - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Harbs TB150/3500 heavy-duty conveyor belt with pneumatic stopper. Technical data: Iiedpfxozrx Nfo An Hsf - Width: 150 mm - Length: 3,500 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: saw blade guard, scorer, Used panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2010 Cutting length 3200mm. Cutting width 1300mm Maximum cutting height 130mm (saw blade diameter 500mm) Saw blade and scoring saw swivel 0-45° digitally adjustable Saw blade and scoring saw height adjustment digital Isdpsztwvaefx An Hoif Parallel fence manually adjustable Double roller carriage, safety guard Switching on the main saw blade and scoring saw from the control panel and/or the machine table Main motor, panel saw 5.5KW (7.5 HP) (adjustable at 3500/4500/5500 rpm) Scoring saw motor, panel saw Duplex miter fence

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offered here is an angle grinder meat mincer K & G Wetter MWW-130 with sorting unit, 2-speed. Motor power 19 kW, 50A, 400V. Hopper approx. 200L. See photos. Throughput approx. 3500 kg/h. 5-piece cutting set with separator. 2x E-Wolf knives. Workshop-tested and immediately ready for use. Further details available on request. Iiodpfx Aney Du R So Hsf Payment in cash or advance payment! Sale only to business customers, no guarantee, no warranty.

Condition: excellent (used), Year of construction: 2015, Miter and crosscut saw with a maximum cutting height of 170 mm sturdy gray cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard, connectable to dust extraction Iiodpfezhx Adjx An Hef Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees - 90 degrees Machine stand - Main switch with locking mechanism - Infeed roller conveyor Ro-St60, 3 meters, right-hand - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty length stop/roller conveyor mm - Scale on the rear upright, measuring gauge with magnifying glass and stop flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock, 54634 Bitburg - free loading - - immediately available -

Condition: good (used), Year of construction: 1999, operating hours: 11,462 h, load capacity: 1,500 kg, lifting height: 3,500 mm, fuel type: electric, construction height: 2,200 mm, mileage: 11,462 km, Electric forklift Iodpozh N Rfsfx An Hjif Brand: JUNGHEINRICH Capacity: 1,500 kg Equipped with a FREELIFT and a SIDESHIFT Lifting height: 3,500 mm Compact model Overall height: 2,200 mm Battery: 2006 Equipped with an external charger Make an appointment for a test drive Watch the video on YouTube.

Condition: good (used), functionality: fully functional, Year of construction: 1988, operating hours: 8,141 h, load capacity: 3,500 kg, lifting height: 3,700 mm, fuel type: gas, mast type: duplex, construction height: 2,340 mm, overall weight: 6,070 kg, Equipment: sideshift, Hyster S3.50XL Condition: good Technical condition: good Optical state: good -LPG forklift -8141 operating hours -Total height 2340 mm -Lifting height 3700 mm -Lift capacity 3500 kg -Year of construction 1988 -Side-shift -Duplomast -3rd and 4th valve Iijdpfsumr U Djx An Hjf -Delivery possible

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 03/2028, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1. Hand – German volunteer fire department. TÜV (technical inspection) valid until 03/2028. An expert opinion according to §23 StVZO in conjunction with §21 StVZO as a "vintage vehicle, special-purpose vehicle, fire department vehicle, equipment carrier" (for an H-registration) dated 09.03.2026 from TÜV Rheinland is available. Engine oil with filter / brake fluid / 4x glow plugs / wiper blades completely NEW, replaced in a specialist workshop in 02/2026 with invoice. Directly from the garage, until recently with the original owner, always registered with the original registration document and even the first vehicle registration certificate from 1989. Only 21,000 total kilometers driven. Very well-preserved Bremen Transporter T1 in the medium-length version with the sturdy factory-fitted high roof. Body condition in detail: Only 2 minor rust spots (rear right wheel arch and left side panel). Otherwise, nothing. Not even at the "typical Bremen rust spots"; these are all "clean" on this vehicle and have not been repaired yet. Only the front right wheel arch has been repaired. Normal signs of use are present. The underbody is also in good condition. This 308 D was explicitly sold to us by the original owner as "accident-free". New winter tires (DOT 2022). High 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, it's an absolute basic version. No seat belts. No power steering. No ABS. Simply pure 1980s, when reliable and durable cars could still be built. In any case, not much can go wrong here. Engine: OM 601 4-cylinder naturally aspirated diesel with 79 hp. 5-speed manual transmission. 127 km/h is stated as the maximum speed. A large step extends mechanically when the sliding door is opened. Iisdpfxsw Tpfue An Hef The vehicle was used by the fire department as an equipment carrier and has some shelving units that can be easily removed when not in use. Conversion manufacturer: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as a "Miscellaneous fire department vehicle". Unladen weight: 2320 kg (including all installed equipment). Permissible total weight - unchanged from the original factory specification to this day - 3500 kg. This means that this 308 D-KA can be driven immediately with the new car driver's license. The special signal system was already removed by the fire department before the sale and is no longer present. The vehicle runs very well; the transfer journey on the highway was a pure pleasure. This offer applies only to commercial enterprises or public authorities. Subject to prior sale and errors. The purchase price is the final price, gross = net. Differential taxation according to §25a UStG because it is a vehicle belonging to a public authority. Therefore, no 19% VAT will be added. However, the VAT cannot be calculated separately from the purchase price.

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection while still in operation until September 2026 Summary of technical data (please inquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally continuously adjustable > Number of tools: 1 unit > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut position > NC length stop mounted on the slotting table included; positioning of the cross-cut saw integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW Item 5: Horizontal profile milling unit (top) ----- > Clamping length: 40 mm Iisdpfxozdk Hyj An Hof > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Item 6: 3. Profiling spindle (hardware groove spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online capability) > Rebating unit for tear-free rebating > Double-part processing package > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Angled window processing unit > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Excluding machining tools ----- Price of the above-mentioned machine available on request! ----- Optional extra: EUR 6,500.00 Note regarding used tools: We currently have used "Gold" series tools in stock (Stock No. #2790) Window tools (Gold series) for IV78 Wood and IV78 Wood/Aluminum Previously used on a Weinig Unicontrol 10; a jointing cutter is additionally required for use on a Unicontrol 6. Tool set for fixed-stroke or CNC spindle machines (80 mm and 95 mm stroke), (Tool set prepared for IV92 where technically feasible) Wood-aluminum tool set for fix...

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. Ijdpfszn N Ecox An Hoif • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, Year of construction: 1964, machine/vehicle number: 63/10.2995-96, pressing force: 1,200 t, total length: 5,300 mm, total width: 2,690 mm, total height: 9,300 mm, overall weight: 360,000 kg, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 500 mm Stroke rate: approx. 10 – 16 strokes/min Shut height: approx. 1,250 mm Drawing equipment: Drawing cushion force: approx. 240 t Drawing cushion stroke: approx. 250 mm Pneumatic ejector in ram: Force: approx. 95 t Stroke: approx. 150 mm Table size: approx. 3,500 x 1,900 mm Heavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application. The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling. A key feature is the movable / sliding press table, which significantly simplifies setup and tool change and makes the machine ideal for handling heavy tools. Iijdpjy S Nhzjfx An Hef The integrated drawing equipment (drawing cushion) provides approx. 240 t of force with a stroke of 250 mm, enabling demanding forming and deep drawing operations. In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Pressing force max.: 1,200 t Dimensions (LxWxH) approx.: 5300 x 2690 x 9300 mm Installation height max.: 1,250 mm Weight approx.: 360,000 kg Machine table clamping surface: 3500 x 1900 mm Passage between the uprights: 3,600 mm Serial number: 63/10.2995-96 Year of construction: 1,964 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, mileage: 88,705 km, power: 125 kW (169.95 HP), first registration: 12/2015, fuel type: diesel, empty load weight: 3,500 kg, maximum load weight: 3,500 kg, overall weight: 7,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 06/2026, color: white, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 7, loading space volume: 2 m³, loading space length: 3,100 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, cruise control, traction control, trailer coupling, CERTIFIED PRE-OWNED, Standard model, color: White IC 194, unladen weight: 3500 kg, permissible total weight: 7000 kg, cargo area (L W H): 3,100 mm x 2,200 mm x 400 mm, tire size: 225/75 R16, cargo area volume: 2 m³, 1st axle: , 2nd axle: , leaf spring suspension, tachograph, trailer coupling: ball hitch + pintle hook, anti-slip regulation (ASR), driver's seat with hydraulic damping, passenger bench seat, radio/CD: CD with hands-free device, fog lights, exterior mirrors: electric and heated, central locking with remote control, underrun protection, oil pan protection, MEILLER tipper, type 2, 3100x2200x400 mm. Subject to errors and changes. Ijdpfjzvhvpex An Heif

Condition: used, power: 38 kW (51.67 HP), first registration: 12/2009, fuel type: diesel, gearing type: automatic, Equipment: air conditioning, Version 38 km/h, 2-speed gearshift for better driving performance 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4×4 drive 65 liter diesel tank Perm. total weight 3500 kg, therefore vol Air conditioning with heating and ventilation system 2 x front working lights Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mech. Quick-Shift quick-change system for superstructures for summer and winter service Preparation of hydraulics and electrics for optional equipment variants High-pressure valves (360 bar) - only on BB201D Hydrostatic delay with brake light function (Pressostat) 4 x lashing eyes Quick-change suction mouth König Health seat with integrated 3-point seat belt Heated rear-view mirrors Integrated rear-view camera incl. 7" color screen - infrared night vision, viewing angle approx. 135° suction mouth camera (only in conjunction with reversing camera) Container with cleaning flaps & water level indicator Sweeping unit with 2 trailed front brushes, 900 mm Sweeping width: 1190 mm - 2400 mm Hydraulic coarse dirt flap Infinitely variable brush speed regulation 0-150 rpm Dust reduction through spray nozzles per disc brush Automatic collision protection (for sweeping and picking up) With hydraulic inclination adjustment of the right-hand brush Sweepings container with suction fan Color: Container in stainless steel look High-dump 1600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass extraction Multi-purpose separator screen for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick-change dirt container Baffle plate Iiedjtzt E Hopfx An Hef

Condition: used, Year of construction: 2000, gearing type: other, fuel type: diesel, first registration: 01/2000, color: orange, overall weight: 12,000 kg, mileage: 1,001 km, empty load weight: 1,580 kg, maximum load weight: 10,420 kg, loading space volume: 3 m³, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rotating beacon Superstructure: Dampening salt spreader, 3 cbm loading volume, folding roof, control panel, reversing camera, belt spreader. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Isdpfxsvhhhgj An Hjif

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 3,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year: 1999 Iisdpfx Anozlvmue Hof ISO 4A (61 cm) Capacity: 3500 kg Opening range: 250-1300 mm Rotator ID: OS2048

Condition: used, Garos GWT 3500 vacuum tumbler whit Scanvaegt weight system and built in vacuum pump. Capacity 3500 lit. Iedjykub Njpfx An Hoif

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples Isdpsylnwyofx An Heif • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 Iisdpfx Aonh Rnuen Hsf - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2686017, For sale is a steel cutting machine from ROTOX, type SZA268, manufactured in 2020. The ROTOX SZA268 is an automatic sawing machine used for cutting steel rectangular tubes and steel profiles with a wall thickness of up to 4 mm. The 90° sawing unit with hydraulic feed enables precise cuts, which can be performed either parallel to a ROTOX PVC cutting line or according to a cutting list. The length positioning is controlled by a servo axis, and the machine features a PC control and a profile-independent clamping system for flexible operation. Technical data: Dimensions: Machine width: approx. 12.5 m without protective fence Machine depth: with 10 mm table: approx. 2500 mm without protective fence with 20 mm table: approx. 3500 mm without protective fence Machine height: approx. 1900 mm Weight: approx. 2560 kg incl. feeding magazine for 10 reinforcing bars and removal table with pusher Cutting angle: 90° Cutting length min / max: 250 / 3500 mm Usable tools: All saw blades must comply with EN 847-1 and be approved for the speed of the saw motors. Saw blade: Ø 450 x 4.0 x 50 mm, Z300 Material to be processed: Steel or aluminum reinforcing bars for window construction Bar length min / max: 450 / 6500 mm Profile height min / max: 7 / 80 depending on the contour mm Profile width min / max: 28 / 80 depending on the contour mm Electrical: Mains connection: 3/N/PE~ 50 Hz 230/400 V ± 5 % Power: 2.4 kW Rated current: IN= 16 A Fuse: B 16 A Iodpfx Anjziands Heif Mains connection cable (type): H05RR-F 5G2.5 qmm Protective conductor: 10 mm² Cu Saw motor: 230/400 V; 50 Hz; 1.5 kW; 5.7/3.3 A Output speed: 65 1/min Lubrication: 0.6 l mineral oil CLP 220 Pneumatics: Operating pressure: 7 bar Limit pressure: min. 6 bar (also during operation) max. 8 bar Compressed air quality: ISO 8573-1: 2010, Class 7.2.4 Pressure switch: Warning pressure 6 bar / Shut-off pressure 5 bar Air consumption: approx. 60 l per cut Hose connection: Ø inner 9 mm Hydraulic linear drive Operating pressure: 160 bar Stroke: 200 mm Motor: 24 VDC; 500 W Workpiece clamping: Pneumatic Permissible ambient temperature during operation: min. 15 °C and max. 40 °C Operating manual available in digital format. Subject to prior sale, changes and errors.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: K4D0124, type of input current: three-phase, input voltage: 400 V, power: 68 kW (92.45 HP), A SET OF TWO BLOWERS WITH FULL FEEDING LINE FOR BOTH! Iodpfx Anoy Nw Nns Hjif Functional KOSME blower set with Input with PET Preforms feeder lift and conveyors for two Blowers included. Included Molds for 0,33-0,5 - 1,0 - 1,5 - 2,0 L bottles in 2 sets included. As a set a second KOSME KSB4000 from Y 2004 Serial K4DO156 included. Were used in PET beer and soft drinks production. 2,0 l 3000 bph 1,5l 3500 bph 1,0 4000 bph 0,33-0,5l 4500 bph

Condition: used, mileage: 14,800 km, power: 80 kW (108.77 HP), first registration: 03/1997, fuel type: gasoline, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: red, gearing type: mechanical, emission class: euro1, number of seats: 6, total length: 5,115 mm, total width: 2,140 mm, total height: 2,450 mm, loading space length: 1,950 mm, loading space width: 2,100 mm, loading space height: 1,480 mm, Year of construction: 1997, 1st owner. Only 14,800 total kilometers driven originally. In full service with the fire department until March 2026. Shortly thereafter, driven to us on the highway for approximately 250 kilometers without any issues. Ijdpfx Anoy Upbme Hsif Valid TÜV (German vehicle inspection) until November 2027 (passed at DEKRA with 14,535 km, “no defects found”). Major engine service with all fluids, new timing belt, new water pump, new spark plugs, etc., in February 2025 at 14,057 km, documented with a receipt of €2311.19 from a car repair shop. TSF (fire department vehicle) superstructure with roller shutters and ladder mounts on the roof. 6 seats and 4 doors. Power steering. 2.0-liter gasoline engine with 109 hp and G-CAT catalytic converter. Emission code: 93/59/I GKL:G1 (31), which means it qualifies for the green environmental badge. 5-speed manual transmission. Unladen weight: 2267 kg. Permissible total weight (original from the factory and never changed): 3500 kg. Overall dimensions of the vehicle (exterior): length 5115 mm / width 2140 mm / height 2450 mm. Vehicle with minor paint damage and signs of wear. Overall in good condition. Approved for road use with the original German documents continuously until April 2026. Immediately ready to drive. The illustrated retractable TS (pump) can remain in the vehicle after consultation. The pump has an oil leak and is not fully operational. The TS will not be sold separately. This offer is only valid for commercial businesses, self-employed individuals, and freelancers of all kinds, as well as for authorities/emergency services. Sales to private end consumers are unfortunately not possible. Subject to prior sale and errors. Differential taxation according to §25a UStG (value-added tax cannot be shown separately and will not be added).

Condition: ready for operation (used), spindle mount: MK 4, rotational speed (max.): 3,500 rpm, rotational speed (min.): 130 rpm, throat depth: 300 mm, Alzmetall AB 35 / S Drill press, column drill Pinole travel: 180mm Overhang: 300mm Spindle: MK 4 Drill chuck: 3-16mm Variable speed: 130 - 3500 rpm Feed rate: 0.1 - 0.2 - 0.3 mm/rev Threading device Coolant unit Vise You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! Ijdpfxjzqy I Te An Hjif You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, immediately available -Tmax 1350°C -Usable internal volume (L x W x H) (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions (L x W x H) (mm) 4200 x 2500 x 3500 -Footprint (L x W x H) (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Includes: -Protective gas buffer tank -Vacuum pump connection -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -Connection for liquid nitrogen, allowing the oven to cool down to -80°C. -Internal insulation made of graphite felt, protected and reinforced with CFC. We will build a second identical oven starting at the end of the year. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial ovens. Inspection in our warehouse is available upon request! Industrial oven, vacuum oven, vacuum furnaces, vacuum hardening oven, hardening furnaces, sintering oven, sintering furnaces. Iiedpfx Anozr U Ane Hof

Condition: used, mileage: 246,800 km, power: 103 kW (140.04 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,700 mm, loading space width: 2,050 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M597----VW CRAFTER 2.0 TDI DOUBLE CAB EURO 6----KM: 246,800, WELL-MAINTAINED WITH SERVICE BOOK LAST INSPECTION WITH OIL CHANGE AT 232,454 KM ON 24.03.2025 ALL INSPECTIONS WERE CARRIED OUT IN A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORM----LIKE-NEW M+S TIRES----* BRAKE ASSIST (HBA) * HILL START ASSIST * START/STOP AUTOMATIC * AIR CONDITIONING ----TOTAL WEIGHT: 3500 KG UNLADEN WEIGHT: 2148 KG PAYLOAD: 1352 KG----DOKA----7 SEATS----SUSPENSION AND STABILIZERS REINFORCED AT THE FRONT AND REAR----FLATBED DIMENSIONS: LENGTH: APPROX. 2.70 METERS Iedsyumvyjpfx An Heif WIDTH: APPROX. 2.05 METERS----BASIC BOX FROM LOGICLINE, MODEL BB-190 ----* BLUETOOTH HANDS-FREE SYSTEM * USB * AUX * 2X 12V SOCKET * ELECTRIC WINDOW LIFTERS * ELECTRIC AND HEATED EXTERIOR MIRRORS * CENTRAL LOCKING WITH REMOTE CONTROL * CABIN LED LIGHTING * STORAGE SPACE/COMPARTMENT IN THE CABIN * LOW EMISSIONS ACCORDING TO EURO 6 EXHAUST STANDARD ----Special equipment: * Airbag driver/passenger side * Passenger airbag can be deactivated * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Exterior mirrors electrically adjustable and heated * On-board tools and jack * Folding remote key (2) * Ladder carrier at the front with protective grille on the front panel * Spare wheel in driving condition * Rear wall with window * Seats in the cabin: double passenger seat with storage/compartment and backrest that can be folded down to create a shelf * Trailer coupling preparation (socket and cable) Additional equipment: * Exterior mirror convex left * Exterior mirror convex right * Turn signals LED integrated in exterior mirrors * Floor covering in the cabin: rubber * Double headlights * Dual-tone horn * Driving assistance system: hill start assist * Driving assistance system: brake assist (HBA) * Electric window lifts front * Windshield laminated glass * Grab handles A-pillars * Interior lights in the cabin: LED * Body/superstructure: flatbed double cab standard * Fuel tank: 75 liters * Radiator grille with chrome trim at the top * Steering column (steering wheel) adjustable * Headlight range control * Truck registration * Marker lights on the side * Engine 2.0 Ltr. 103 kW TDI * Rear fog light * Wheelbase 3640 mm * Low emissions according to Euro 6 exhaust standard * SCR system (AdBlue technology) * Power steering electro-mechanical * Seat cover / upholstery: fabric * Seats in the cabin: driver's seat adjustable * Seats in the cargo/passenger compartment: 1st row * 4-seater bench (double cab) * Steel rims 6.5x16 * Start/Stop system engine * Front bumper in gray with trim in vehicle color * Warning system for seat belt (driver's side) * Heat protection glazing * Central locking with remote control and interior operation * Permissible total weight 3.50 t ---- ++ Exclusive promotion at Autohaus Mat GmbH: Up to €1,000 trade-in bonus? Your advantage for changing vehicles! (only valid for commercial vehicles) ++ Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when buying a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailored financing options to suit your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team is here to help.