Used Zimmermann Fz for sale (273)

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Fpsdpjy Tpb Rjfx Ahtok Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Fpjdpfx Ajumrf Ashtsk Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Fsdpfxet Akcfj Ahtepk Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2021, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,720 mm, color: grey, Year of construction: 2021, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 7.159 kg Carrying capacity: 31.841 kg GVW: 39.000 kg Fedpeznkcpjfx Ahtspk Maintenance, history and condition Number of owners: 3 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, mileage: 266,000 km, power: 184 kW (250.17 HP), first registration: 02/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2016, Equipment: cruise control, electric window regulation, power mirror, spoiler, tail-lift, Front axle: Max. axle load: 4480 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Max. axle load: 8480 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Number of cylinders: 6 Engine capacity: 6.700 cc Empty weight: 6.702 kg Carrying capacity: 5.288 kg GVW: 11.990 kg Tail lift: Dhollandia , tail lift, 1500 kg Registration number: 75-BSL-5 = Additional options and accessories = - Roof spoiler = Remarks = Driving trough higth 250 cm Fpodpfx Aszm S Nhehtsk Left side regular wall Right side Side taurpin

Condition: used, mileage: 257,232 km, power: 120 kW (163.15 HP), first registration: 03/2013, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G300109 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 2013, registered as a self-propelled work machine, green registration - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer mounted under the frame - Reinforced shock absorbers - High roof and rear door - Auxiliary hot air heater - Rotating beacon, yellow, front left / rear right - Rear door, two-leaf, 270 degrees TV inspection system - RCA proline with Sat - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel gantry with winch for lowering camera/carriage - 1 carriage L 135 for main sewers DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional halogen lighting, inclination measurement and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank Fpedezpcx Sspfx Ahtok - Power supply via gel batteries Financing example: * Internal number: G300109 * Purchase price: € 39,500.00 * Down payment: 10% * Term: 60 * Monthly rate: € 624.93 Residual value: € 7,980.00 If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 2 axles, first registration: 08/2022, total length: 11,270 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 6,530 mm, color: white, Year of construction: 2022, Equipment: tail-lift, Rear axle 1: Tyre profile left: 60%; Tyre profile right: 60% Rear axle 2: Steering; Tyre profile left: 40%; Tyre profile right: 40% Empty weight: 7.051 kg Carrying capacity: 22.949 kg GVW: 30.000 kg Tail lift: Dhollandia, slider lift, 2502 kg Registration number: OT-54-LP Dimensions: Internal dimensions LxWxH 1105x250x270 cm Fodpfx Aozmypvshtspk External dimensions LxWxH 1127x255 cm Drive-through height 260 CM

Condition: new, Year of construction: 2026, pressing force: 100 t, Durendus DCD-100 – Hydraulic Deep-Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a hydraulic C-frame deep-drawing press (single-column press) from Durendus with an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep-drawing, and assembly tasks. It is equipped with an integrated deep-drawing cushion and a state-of-the-art Siemens control system. Featuring high travel speeds and precise control, it is ideal for both series production and flexible single-part applications. ===== Technical Data & Information: Hydraulic C-Frame Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / single-column press - Pressing force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm ==== Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler ==== Additional Functions - Deep-drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs Fpjdpfxeyw I T Hs Ahtsk - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance available ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operation statuses via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep-drawing, forming, assembly operations, punching processes, series production, toolmaking Single-column press, C-frame press, deep-drawing press, hydraulic press, industrial press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety guideline NR 12, which is based on these requirements. Our core strengths are special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Fodpfx Aheutuyistspk Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Horizontal machining center with pallet changer, STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Manufacturer's No. 77, Year of construction 1990 Travel range X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Fodpfx Ahodzqmrotjpk Spindle speed max. 7100 rpm, stepless Tool holder ISO 40 Power connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and dual-arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with lateral movement as Y-axis - Coolant spray nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Loading into a 40" OT HC container is possible. Good condition.

Condition: used, Machine is not operational, control system does not start, spare parts available with control system Horizontal machining center with pallet changer, STEINEL Type BZ 24 FFZ with CNC control system SIEMENS Sinumerik 850 M Mfg. No. 58, Year of manufacture 1990 Travel: X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, infinitely variable Tool holder: ISO 40 Power connection: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet location for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - Coolant nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control system SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Fedpedzqmfefx Ahtopk Space requirement L x W x H: 9000 x 3100 x 3200 mm Weight: 13.5 tons Machine is not operational, control system does not start - otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H: 9000 x 3000 x 3000 mm Chip conveyor L x W x H: 4700 x 1000 x 1450 mm Partial sales possible, please inquire about the required spare parts.

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM, year 1997, are for sale: Fjdpfx Ajxdhp Eohtjpk 9 pcs. tool arms 1 pc. spindle 1 pc. spindle motor

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Fsdpfx Ahjznkpvjtopk Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: used, mileage: 48,000 km, power: 75 kW (101.97 HP), first registration: 06/2000, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 11/2026, color: beige, gearing type: mechanical, emission class: euro2, number of seats: 6, total length: 5,413 mm, total width: 1,880 mm, total height: 2,090 mm, Year of construction: 2000, Equipment: ABS, all wheel drive, parking heater, 1st owner. Only 48,000 total kilometers driven, with service records. Directly from the heated garage of a German aid organization. Fsdpfx Aeyu Egwjhtspk Long wheelbase syncro 4x4 with limited-slip differential. 3320 mm wheelbase. Registered as a 9-seater, but actually has 6 seats. Original registration according to the vehicle registration document as a "closed passenger car 96/69/EC III". Last registered as "other motor vehicle, water rescue 96/69/EC I". Ball-type tow hitch with a 2000 kg braked towing capacity or 700 kg unbraked. Maximum permissible total weight = 4500 kg. Unladen weight according to documents: 1854 kg. Permissible total weight: 2800 kg. Overall vehicle dimensions: 5413 mm long / 1880 mm wide / 2090 mm high with a blue rotating beacon (without a special warning signal, it is 1920 mm). 5-cylinder TDI diesel engine with 2461 ccm and 102 hp, running perfectly. 5-speed manual transmission. 155 km/h. ABS. Power steering. Auxiliary heater. 2nd battery and external power supply. Good winter tires from DOT 2023 (with "snowflake symbol"). Swiveling spare wheel carrier / original VW syncro. Fog lights. Additional rear upper turn signals. Production date of this VW bus at the Hanover plant: 02/17/2000. In spring 2026, the T4 was driven over 700 kilometers on the highway without any problems. It runs smoothly and cleanly at all speeds. No problems whatsoever. The van is ready to drive with a valid MOT until 11/2026. There are signs of wear. The overall condition of this long wheelbase syncro TDI is good. This offer is only valid for commercial enterprises of any kind as well as authorities/emergency services. Sale to private end consumers is unfortunately generally excluded. Subject to prior sale and errors. The purchase price is quoted gross = net. So-called differential taxation according to §25a UStG (German VAT Act). This means that no additional 19% VAT has to be paid on top of this price. At the same time, however, the VAT cannot be separately calculated from the purchase price and therefore cannot be deducted for those entitled to claim input tax deduction.

Condition: good (used), mileage: 317,001 km, power: 285 kW (387.49 HP), first registration: 01/2020, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,560 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, power mirror, soot filter, spoiler, tail-lift, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights - Speed limiter - Tail lift 2000 kg - Particulate filter - Radio - Spare wheel - Sleeper cab - Sun visor - Tool box - Tow hitch = Notes = Dhollandia DHSM.20 under-ride tail lift 2000 kg Load area: 170 cm Internal dimensions of the load area: L756 x W246 x H270 cm Entry height: 261 cm Load area height: 115 cm Sliding column Safety device Air conditioning Auxiliary heater Fog lights Spare wheel Tool box = Further Information = General information Number of doors: 2 Model year: 2026 License plate: 90-BPD-5 Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 315/70 R22.5; Max. axle load: 7500 kg; Steered; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70 R2.5; Double tires; Max. axle load: 11500 kg; Suspension: Air suspension Weights Unladen weight: 10,410 kg Payload: 8,590 kg GVW: 19,000 kg Functional Tail lift: Dhollandia DHSM.20, under-ride tail lift, 2000 kg Interior Interior: gray Maintenance, History and Condition APK (Technical Inspection): Valid until 01.2027 Technical condition: good Optical condition: good Product Safety Fodpfx Ahezmgb Eetopk Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen Fpodsznlkzspfx Ahtok • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, For the efficient and productive machining of long parts, such as beams, profiles, tubes, etc. • Max. travel ranges: X-axis: 4000 mm working range Y-axis: 400 mm working range Z-axis: 400 (600) mm • Max. load capacity: 1000 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 30 mm in S355 • Thread cutting: M16 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • End and reference switches in non-contact design • Spindle overload protection • Solid, precise cross table, generously sized • Safety device combined with a light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approx. space requirement L x W x H: 6660 x 4500 x 3400 mm • Total weight: approx. 5500 kg • Connections on the customer side: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7vBasic • Main computer: MC 355 Touch with control panel and integrated 19-inch TFT color flat screen - 24-position tool changer - Minimum quantity lubrication - Internal spindle cooling (IKZ) - Chip conveyor including discharge chute - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option Fedjznkipjpfx Ahtopk - Heidenhain tool length measuring system - 4 units of mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) Price on request.

Condition: used, mileage: 302,643 km, power: 338 kW (459.55 HP), first registration: 11/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x6, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,900 mm, total width: 2,550 mm, loading space length: 5,600 mm, loading space width: 2,390 mm, loading space height: 1,050 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, trailer coupling, = Additional options and accessories = - Remote central locking - Air suspension - Tow jaw coupling (Maulkupplung) - Hub reduction - PTO (Power Take-Off) - Radio - Sun visor - Toolbox - Central lubrication system = Notes = HMF Z crane. Fjdpfx Aexgvt Rehtopk Type 1643 hydraulic outriggers. 2 x hydraulic extension. Bucket grab. 2-way tipper with rear doors. Hydraulic sideboard. Top cover. = Further information = Technical information Number of cylinders: 6 Axle configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering; Left tire tread: 30%; Right tire tread: 30%; Brakes: Disc brakes Rear axle 1: Tire size: 315/80R22.5; Dual tires; Left inner tire tread: 40%; Left outer tire tread: 40%; Right inner tire tread: 40%; Right outer tire tread: 40%; Brakes: Drum brakes Rear axle 2: Tire size: 385/65R22.5; Steering; Left tire tread: 40%; Right tire tread: 40%; Brakes: Disc brakes Weights Unladen weight: 11,020 kg Payload: 20,480 kg Gross vehicle weight: 31,500 kg Functional Crane: HMF Identification Type number: TATRA 6X6 / T158/II / 2 SIDE TI = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide accurate information, but no rights can be derived from the information provided.

Condition: used, mileage: 302,643 km, power: 338 kW (459.55 HP), first registration: 11/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x6, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,900 mm, total width: 2,550 mm, loading space length: 5,600 mm, loading space width: 2,390 mm, loading space height: 1,050 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote central locking - Air suspension - Towing jaw - Hub reduction - PTO - Radio - Sun visor - Toolbox - Central lubrication system = Notes = HMF Z crane. Type 1643 Hydraulic outriggers. 2 x hydraulic extensions. Bakker grab. 2-side tipper with rear doors. Hydraulic side board. Top cover. = Further Information = Technical Information Fjdpfx Ajw Imk Dshtjpk Number of cylinders: 6 Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering; Tire tread left: 30%; Tire tread right: 30%; Brakes: Disc brakes Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40%; Brakes: Drum brakes Rear axle 2: Tire size: 385/65R22.5; Steering; Tire tread left: 40%; Tire tread right: 40%; Brakes: Disc brakes Weights Unladen weight: 11,020 kg Payload: 20,480 kg Gross Vehicle Weight: 31,500 kg Functionality Crane: HMF Identification Type number: 6X6 / T158/II / 2 SIDE TIPPER - = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to ensure the information is correct, but no rights can be derived from the texts provided.

Condition: excellent (used), Year of construction: 2023, color: grey, NEW! Container 10m³ / 10 cubic meters With French door. Length: 5.5 meters Width: 2.28 meters Height: 0.8 meters Hook height: 1.45 meters Fjdjzldrxjpfx Ahtspk Cevoman bvba. Lenskendijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Fedpox Twcpofx Ahtspk

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this involute gear grinding machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: max. gear diameter: 7100 mm gear width: 1500 mm max. module: 45 table diameter: 4000 mm grinding wheel diameter x width: 400 x 500 mm max. helix angle: 45 degrees hobber diameter: 500 mm hobber speed: 9–63 rpm total power consumption: 47 hp Machine weight: 160,000 kg Fpjdpfjxwlthox Ahtok A video of the machine can be sent via WhatsApp.

Condition: used, Year of construction: 2011, Pacton TXD 3 Sliding Curtain Trailer / Sliding Roof / Hard Wood Floor / Lift Axle / 2011 Stainless Steel Toolbox Sliding Roof Hard Wood Floor Lift Axle Fpedpfx Ahjzki Agotek A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: as good as new (ex-display), BORING AND MILLING MACHINE BFZ 3000 for the cost-effective production of profiles and long parts made of steel, stainless steel and aluminum Demonstration machine, year of manufacture 2018 Fsdpfozlyr Iox Ahtspk Control system: Siemens SINUMERIK 808 D Advanced max. working area x-axis 3,000 mm max. working area y-axis 260 mm max. working area z-axis 300 mm Tool holder: BT 30 Spindle speed: 4,000 rpm at i=2 (various gear ratios possible) Spindle drive power: 7.5 kW Spindle torque: 48 Nm at 40% duty cycle Rapid traverse: 40,000 mm/min Drilling capacity in S355: 26 mm Threading capacity in S355: M16 Milling capacity in S355, 40% duty cycle: 200 cm³/min Repeatability: +/- 0.05 Workpiece support height: 850 mm Space requirement L x W x H: 6,000 x 1,600 x 2,400 mm Total weight: approx. 3,500 kg Tool changer: 11-position max. tool diameter: 80 mm max. tool length: 160 mm max. tool weight: 4 kg Connections: max. electrical power: 12 kW Slow-blow fuse: 32 A Compressed air: 6 bar Minimum quantity lubrication, 3 pcs. mechanical-hydraulic vises Inspection possible by appointment.

Condition: new, mileage: 1 km, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 10,500 kg, loading space length: 7,500 mm, loading space width: 2,550 mm, loading space height: 2,500 mm, Year of construction: 2026, Equipment: tail-lift, Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: ZF Powerline, 8-speed, automatic Axle Configuration Fedjwaaxgjpfx Ahtepk Tire size: 285/70R19.5 Brakes: Disc brakes Front axle: Max. axle load: 6,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Parabolic suspension Rear axle: Max. axle load: 10,500 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Air suspension Functional Tail lift: Dhollandia DH/LM 2.0, tailgate, 2,000 kg Body manufacturer: Carr De Bruecker sliding curtain Condition General condition: Very good Technical condition: Very good Visual condition: Very good Damages: None Warranty Warranty: None