Used Renninger Pritschenaufbau Mit Plane for sale (9,232)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Nwedswcgr Ejpfx Abzsi Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: used, 7 Collet sizes: Nedobn Rpispfx Abzowi 7-9-10-12-16-18-20 mm

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. Nwsdpfx Ajyq Rdyebzsi The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. Nodpfx Aboc Swhyezjwi We are looking forward to your contact!

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Nwodsx S Ewrjpfx Abzji

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: Nedpfx Abjc I T Txozewi - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V Nwedpfx Aswu Dbbjbzei kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Year of construction: 1992, condition: not inspected (used), Bagging machine and net clipper, double unit, manufacturer Strapack, for apples, potatoes, 1-5 kg capacity. The machine is in very good condition and was in operation for only about 10 years. The machine has 4 bagging stations, which allows for a throughput of approximately 15-20 2 kg bags per minute. The machine is complete with all accessories and ready for operation. Nwjdshh Idrspfx Abzsi The machine has been fully overhauled; price upon request. I am also selling SPARE PARTS for EW20, EW10 and net clippers UC20. If interested, please contact:

Condition: used, functionality: fully functional, 20FT office container offered for sale, starting from Meppen. ✅ CONTAINER TYPE: Office container ✅ DELIVERY CONDITION: Used, watertight 1 toilet 1 hand wash basin 1 kitchenette Laminate flooring can be installed (see pictures). The container is sold in used condition and may have defects, impurities, color variations, rust, etc. ✅ DIMENSIONS L x W x H: 6058 x 2438 x 2800, internal height 2500 mm. ✅ TRANSPORT: Please provide us with your postal code so that we can prepare a free and non-binding offer for the container, including delivery and, if necessary, unloading from the truck. ✅ VARIETY: We also offer a wide range of sea containers in all common sizes (20DV, 40DV, 20HC, 40HC...) and for every need. Whether for storage, construction projects, logistical solutions, or sea transport. We look forward to hearing from you! Nsdpezpw D Njfx Abzowi NAUTEXA GmbH

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Njdpfszpya Hjx Abzowi Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,401 h, load capacity: 3,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,919 mm, Type: Linde E30-01 Year of manufacture: 2014 Operating hours: 8,401 Battery: good condition Mast: Duplex mast without free lift Overall height: 2,919 mm Lift height: 4,450 mm Nodpfx Ajx Dld Hjbzewi Free lift: without Additional hydraulics: double Attachment: integrated sideshift Cabin: Full cab with heating Driver’s seat: COMFORT (fabric upholstery) Driver’s station equipment: PANORAMIC interior mirror Driver’s station equipment: HEIGHT-ADJUSTABLE steering column Hydraulic control: CENTRAL LEVER OPERATION LLC Drive control: dual pedal control Lighting: working lights front and rear / blue spot rear Battery: Year: 2021 (good condition) Charger: compatible The unit will be sold in overhauled technical and optical condition, with valid safety inspection (UVV) and fresh maintenance. Warranty is 6 months after delivery, excluding wear parts and damages caused by the customer. The unit can be viewed and tested by appointment. Transport can also be offered as an option.

Condition: new, Year of construction: 2026, functionality: fully functional, Tank container: 20-foot steel box container with an integrated 25,700-liter polyethylene tank (wall thickness 1 cm). Only for non-hazardous products (water, oils, alcohol, etc.), not for ADR materials. Temperature range up to -40 degrees Celsius. 1. Condition: new, unused, with valid CSC plate 2. Volume: 25,700 liters 3. Decompression valve 4. Working pressure: 7 bar 5. Spare parts included: decompression valve, outlet valve, manhole cover 6. Desired color included (upon pre-order) 7. Company logo included (upon pre-order) 8. Tank removable 9. Transport: Free and non-binding offer for delivery (including unloading, if desired) – simply provide the postal code. 10. Original images 11. Available upon pre-order We look forward to hearing from you! NAUTEXA GmbH Nwjdpfxszpx Nto Abzsi

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light • including calibration standard • incl. 2-monitor operation Nwedodz Er Rspfx Abzsi • incl. new Windows 10 • incl. Opticheck3D 5.0 ​​evaluation software (12 months free SW update) Manufacturer's icon image (sister device)

Condition: used, mileage: 601,160 km, power: 390 kW (530.25 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,299 mm, loading space width: 2,498 mm, loading space height: 2,406 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, Vehicle data: * First registration: 06/2019 * Engine: OM471, 12.8 l, 390 kW (530 hp) * Transmission: Mercedes PowerShift 3 * Axle configuration: 6x2 with liftable and steerable trailing axle * Permissible total weight: 27,000 kg Cab & Comfort: * BigSpace cab (2.50 m wide, flat floor) * Comfort seats for driver/co-driver * 2x comfort bed (top & bottom) * Automatic climate control + auxiliary heater with hot water * Ambient lighting * Multifunction steering wheel in leather * Navigation system + interactive multimedia cockpit Technology & Safety: * Active Brake Assist 5 * Distance Control Assist (ACC) * Lane Keeping Assist * Traffic Sign Recognition * ESP / Stability Control Assist * Predictive Powertrain Control * MirrorCam system Chassis & Body: * Air suspension front & rear * Liftable and load-relieving trailing axle * Aluminum rims all around * Wheelbase: 4,600 mm * Frame overhang: 2,250 mm * Tank & Range: * 500 liter tank * 75 liters AdBlue Internal vehicle number: 11363 Nwedszpg Epopfx Abzji Errors and prior sale excepted. Advertisements and various inscriptions have been digitally removed. We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can offer you the following services for an additional charge: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Brokerage of financing * Application for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport YOUR VTS TEAM

Condition: used, mileage: 397,300 km, power: 115 kW (156.36 HP), first registration: 09/2012, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 2,300 mm, Equipment: tail-lift, * Manual transmission * Rearview camera * 3 seats * Storage compartment * Tail lift * Unladen weight: 5,140 kg Nedpfxozpg Dfo Abzewi ----Internal vehicle number: 10770----Errors and prior sale excepted.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 8x4, wheelbase: 2,510 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 56,000 mm, loading space width: 24,200 mm, loading space height: 11,000 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Leaf spring suspension - Differential lock - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air-suspended seats - Air horn - Particulate filter - Radio/Multimedia system - Rotating beacon - Rear view camera - Seat heating - Sun visor - Lane keeping assist - Stability control Internal number for customer inquiries: 5-106 Nwodpfxezpwmks Abzsi MAN TGS 41.480 8x4 three-way tipper with a Meiller Trigenius three-way tipper, MAN factory-built body Vehicle: Diesel engine MAN D2676 LFAY, 353 kW (480 hp), 2,450 Nm torque, Euro 6e MAN TipMatic 12.28 OD Driving program MAN TipMatic Performance, Efficiency and Offroad, up to 70,000 kg Drive 8x4 Suspension leaf/leaf Differential locks on driven rear axles 2,505 mm main wheelbase, 1,400 mm wheelbase between rear axles 390 l fuel tank volume, 35 l AdBlue tank volume Full brake assist High-performance engine brake MAN EVBec, adjustable Disc brakes on both front axles, drum brakes on both rear axles Cab NN: the practical one (narrow, medium-length, normal height) Lift roof, mechanical Driver comfort seat, air-sprung, with lumbar support, shoulder adjustment and seat heating Sun blind, door side windows, inside, mechanical, driver's side Cool box Infotainment control MAN SmartSelect with touchpad and direct access buttons MAN Media System Navigation Advanced 7 inches MAN sound system Navigation map Europe and Russia Online traffic for navigation function Body: Three-way tipper body Meiller Trigenius D428 (MAN factory body from MAN plant) Dimensions LxWxH 5600 mm x 2,420 mm x 1,100 mm Front wall 1,300 mm high Floor tipping bridge, made of steel HBW 450, 6 mm Load securing with floor and side wall lashing points Side wall tipping bridge, left Bordmatik, right pivoting Access steps on front wall of tipping bridge Rear wall tipping bridge, pivoting Axial pump tipping hydraulics, MEILLER Type 296/54 Contour marking for tipping bridge, reflective, white on the side, yellow on the rear and more Financing / Hire purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. General information Year of construction: 2025 Cab: Local traffic Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVW: 41,000 kg Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Tire size: 385/65-22.5; Steered Front axle 2: Tire size: 385/65-22.5; Steered Rear axle 1: Tire size: 315/80-22.5; Differential lock Rear axle 2: Tire size: 315/80-22.5; Differential lock Functional Brand of body: Meiller Trigenius D428 Pump: Yes Condition General condition: very good Technical condition: very good Optical...

Condition: used, mileage: 396,000 km, power: 184 kW (250.17 HP), first registration: 06/2014, fuel type: diesel, overall weight: 11,990 kg, gearing type: automatic, emission class: euro6, Equipment: air conditioning, tail-lift, FL 250 Automatic transmission Air conditioning Refrigerated body, 6.65 x 2.46 x 2.30 meters 2 side doors Nedpfjzpcp Dex Abzewi Refrigeration unit: Carrier Supra 1150Mt° 2 evaporators Folding partition Tail lift: Hollandia 1500 kg Leaf and air suspension Belgian registration Price: €11,500 (net)

Condition: used, empty load weight: 6,170 kg, maximum load weight: 32,830 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 12/2019, next inspection (TÜV): 08/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: black, Year of construction: 2019, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our homepage. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents Nwsdpfxszpdy Ds Abzei * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 6,170 kg, maximum load weight: 32,830 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 12/2019, next inspection (TÜV): 08/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: black, Year of construction: 2019, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing Nsdpfx Ajzpdzbjbzjwi * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 6,170 kg, maximum load weight: 32,830 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 12/2019, next inspection (TÜV): 08/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: black, Year of construction: 2019, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Disclaimer: Subject to changes, prior sale and errors. Nsdpfx Aezpdy Robzewi You will find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. Nwsdpfx Aoy U Auyjbzoi • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. Nodpfjy U Autox Abzjwi • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Nsdpjiq Hxksfx Abzswi Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2017, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,660 mm, loading space volume: 90 m³, Equipment: ABS, Krone SD flatbed with tarpaulin, BPW axles, disc brakes Internal reference number for inquiries: 0726669 * Condition: very good * First registration: 03/2017 * ABS * 3-axle, air-suspended * BPW axles Load compartment dimensions: Length: 13,600 mm Width: 2,470 mm Height: 2,660 mm Tires: * 1st axle: 385 / 65 R 22.5, 30% tread, air-suspended * 2nd axle: 385 / 65 R 22.5, 30% tread, air-suspended * 3rd axle: 385 / 65 R 22.5, 30% tread, air-suspended ----Price: 3,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, Polish, French, and...? Nodpfxozp Aaio Abzjwi Typographical errors, errors and prior sale are subject to change.

Condition: ready for operation (used), Schmalenberger ZHT02 32-08/2 (50Hz) SN: 2018005883/20 with ATB CNF 90L/2D-11S+E3 / 1710 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwjdozpcwujpfx Abzji