Used 3-Saw Edging Machine for sale (101,416)

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Dcedpfx Adswiquqo Nsg Türkei 2100 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Dodpfx Adsy En E Se Nscg Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Dcsdpfov Sm Hcjx Ad Njg Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately -

Condition: used, Year of construction: 2010, machine/vehicle number: MR006967, Used: Vertical panel saw, manuf. Elcon – price is ready-to-use ex Staphorst. On-site delivery negotiable. Technical specifications: - Maximum saw blade diameter: 250 mm Dodpfsyz Ii Asx Ad Necg - Serial number: 911054

Condition: used, Year of construction: 1998, machine/vehicle number: MR003421, Used panel saw, manufacturer Putsch. Machine price ex Staphorst, on-site delivery negotiable. Technical specifications: - Machine number: 9814C393 Dedsyz Iivepfx Ad Njcg

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Djdpoudim Dsfx Ad Nocg Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Djdpjmrp Tlofx Ad Nscg CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle Dedpjy Emgbjfx Ad Nscg 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: good (used), Year of construction: 1998, machine/vehicle number: 119878, Offer 26098 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: • Round: 130 mm • Square: 120 mm • Flat: 305 x 40 mm or 240 x 85 mm - Miter adjustable left & right: 0° – 90° - At 45°: • Round: 130 mm • Flat: 245 x 30 mm or 180 x 70 mm Dsdsy At D Ijpfx Ad Necg - Infinitely variable saw blade feed rate: 0 – 10 m/min - Saw blade cutting speed: 13 / 26 m/min - Saw drive: 400 V / 1.7 / 2.6 kW - Hydraulic drive: 400 V / 0.75 kW - Hydraulic material vice, steplessly adjustable clamping pressure - Handwheel for fine adjustment - Adjustable material stop - Coolant system - Discharge roller conveyor with length stop: 5000 mm - Infeed roller conveyor: 4000 mm - Space requirement: approx. W 800 x H 1770 x D 1020 mm - Weight: approx. 950 kg

Condition: used, Year of construction: 1997, incl. 3-roller feed, motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/sec, height-adjustable sanding table, table size: 1000 x 350 mm, infinitely tiltable sanding unit from 0 - 45°, angle scale and mechanical lock, foldable veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central extraction port: Ø 140 mm, sanding belt: 3000 x 150 mm. Storage location: Supplier. Dcedpfx Ajy Dd Iged Njg

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. Djdpfxoi D Di So Ad Necg For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Dcedpfxswq A Dye Ad Njg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Machine reamer: adjustable, 3 pieces -Diameter: Ø 28/30/38 mm -Recording: MK2 -Submission/Price: complete -Transport dimensions: 340/100/H40 mm -Weight: 2.7 kg Djdpoyz Inlsfx Ad Necg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Dcjdpfsy Dcmbox Ad Nog Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: excellent (used), functionality: fully functional, Automatic leveling machine for bandsaw blades. For automatic measurement, inspection, and correction of irregularities. Blade widths from 50 to 300 mm. Very well-maintained machine. Low usage. As good as new. Technical data in the PDF file. Dcjdpfxsy A Igwj Ad Neg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Dedpfovmfawox Ad Nscg Standard with table extension and table extension made of sheet steel Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: refurbished (used), grinding wheel diameter: 150 mm, year of last overhaul: 2026, disc diameter: 150 mm, grinding spindle motor power: 2,200 W, compressed air connection: 5 bar, The machine has been completely disassembled, all wear parts replaced, and repainted – it is in as-new condition. Sale includes a functional warranty. Main features: - For re-sharpening and re-toothing HSS segment, CV, and solid carbide saws using the CBN deep grinding process Tooth forms A, Aw, B, Bw, and C according to DIN1840 - Grinding of variable pitch teeth (option) - Grinding of special tooth shapes (option) - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely adjustable (programmable) tooth geometry - Grinding of repair segments on segment teeth - Deburring/chamfering alternately top/bottom or same side - Continuously variable rake and clearance angles - Advanced machine guard hood for easy opening/closing Key advantages: - Short grinding times with excellent surface finish thanks to sturdy machine design, optimised clamping flanges for the saw blades, and high drive power - Consistent, repeatable quality due to CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical data: - Saw blade diameter: 20–550 mm - Max. saw blade thickness: 6 mm - Number of teeth: 20–999 - Working speed: 3–75 teeth/minute - Cooling: approx. 5 bar at 40 L/min - Grinding wheel drive: 2.2 kW - Dimensions (LxWxH): approx. 1750 x 1200 x 1800 mm - Weight net/gross: approx. 800 / 980 kg - Paint finish: Dove blue Accessories: - Software for grinding arc teeth, angled teeth, and cylindrical (round) grinding (software extensions available on request) - Saw blade holders diameter 400, 300, 215, 140 mm (other diameters available on request) - Reducing rings diameter 16x22, 27, 32, 40, 50 mm (others on request) - Base adapter for saw blade holders - Mechanical power clamping nut - Coolant system including high-pressure pump, mist extractor, and magnetic separator, designed for emulsion cooling - Automatic central lubrication with lubricant pressure monitoring (linear guides and ball screw) - Operating manual including wiring diagrams Dodjpgkgqspfx Ad Nocg - Operating voltage: 3-phase current Trade-in of your used ECE 45, if available, is possible.

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Capacity round 320mm Dcsdpfx Ajbta Dmjd Nsg

Year of construction: 1989, condition: good (used), Kasto fully automatic sawing machine type HB 420 AU. Sawing capacity round 420mm Sawing capacity square 420x420mm Maximum clamp opening 480mm Dodpfx Aoh Huazjd Nocg Saw blade 6300x41x1.3mm Variable speed 20-130rpm Chip conveyor Engine power 8kW Weight 3360kg Machine in neat good working condition.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Dodpsyzpm Nefx Ad Nscg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, total length: 3,350 mm, total width: 1,510 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg Dsdetp T Dtepfx Ad Nocg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Dcjdpfxey A Hnms Ad Njg Series : B20 .

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Dcedpfx Ajy Ay Aked Njg Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Djdoyrhb Sepfx Ad Nocg Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine - Dcjdpfxju R Sy Ao Ad Njg