Used Aeg Amv132Mr8/4 for sale (58,367)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Giedpfsd Tbbdex Ahvju - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gieded Tqalepfx Ahveu - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Gjdofdkb Uopfx Ahveiu Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Gjdpfeguk A Hex Ahveiu Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Gsdpefdkbhofx Ahvoiu - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Gjdpfx Ajguk Dkshvjiu The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Gjdpfxeguk Dve Ahveiu - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Giodpsv Ukz Aefx Ahveu Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: Gisdpfx Asyyny Ejhveu 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, machine/vehicle number: 87 54 41 57, Grinding wheel Ø: 200 mm grinding wheel width: 30 mm grinding wheel bore: 51 mm grinding wheel speed: 3000 rpm electrical connection: 380 V, 630 W Giedpfxsdc Swus Ahveu space requirement: 600 x 260 x 320 mm Weight approx.: 23 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 440 mm, rapid traverse X-axis: 400 m/min, rotational speed (min.): 2,500 rpm, controller manufacturer: HEIDENHAIN TNC 123, The machine is in very good condition. Immediately ready for use. Giodsyxpraopfx Ahvsu

Condition: good (used), bench drill, pillar drill, column drill -Manufacturer: AEG, Bench drill type DTBK-10 -Clamping table: 175 x 175 mm -Spindle mount: Drill chuck B16 -Protrusion: 200 mm -Column: Diameter 60 mm -Spindle stroke: 70 mm Gedshfavqspfx Ahvsiu -Motor: 0.25 kW / 2800 rpm -Voltage: 380 V -Dimensions: 580/590/H730 mm -Weight: 60 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Gjdpfx Asupvrxehvsiu Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: used, Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this used FORMAT-4 PROFIT H200R 13.33 throughfeed machining centre, year of manufacture 2022. Type: PROFIT H200R 13.33 Serial number: 30B.05.067.22 Code: 9417 Rated voltage: 400.0 V Number of phases: 3P+N Frequency: 50/60 Hz Rated current: 40.0 A Power: 18.0 kW Year of manufacture: 2022 Giedpfsyvtq Usx Ahvsu Control voltage: 24 VDC Minimum protection fuse: 32 A Maximum protection fuse: 50 A Minimum compressed air supply: 8 bar Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Giedpfx Aoyr Nd Uehvou

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. Gedpfx Ahsurf Twoveiu 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Gsdpfx Aowq Sv Eohvjiu Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, Year of construction: 1998, machine/vehicle number: 22406695, travel distance X-axis: 992 mm, travel distance Y-axis: 807 mm, travel distance Z-axis: 561 mm, workpiece length (max.): 1,260 mm, workpiece width (max.): 1,060 mm, workpiece height (max.): 550 mm, input voltage: 400 V, input frequency: 50 Hz, We are offering this used AEG Elotherm P1 sinker EDM machine, year of manufacture 1998. Type: P1 Serial number: 22406695 Order number: 704.1177 Voltage: 400 V Gisdpfx Ahoypln Dsvju Current: A Frequency: 50 Hz Switch-off method: Plan: Year of manufacture: 1998 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), AEG FR coil winding machine Winding diameter: 450 x 550 mm Gsdpfx Ajylutbehvoiu

Condition: excellent (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: AEG, fuse-switch disconnector, circuit breaker 160 A, unused, original packaging -Type: LtSiSt 167 -Number: 3x load break switches available -Price: per piece -Cardboard dimensions: 225/135/H150 mm Gisdpfx Aheygrzlovsu -Weight: 2.0 kg/piece

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m Gedpfxjyf Un Se Ahvjiu 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Gsdpfxsxhdthj Ahvsiu Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, This listing is for a AEG UCR Battery Charger. The unit is in full working condition and is ready for immediate release. AEG UCR Battery Charger Overview The AEG UCR Battery Charger is specifically designed for charging AEG batteries within the voltage range of 2.4 V to 12 V, making it ideal for AEG cordless power tools. Key Features: Voltage Compatibility: Charges batteries from 2.4 V to 12 V, ensuring compatibility with a wide range of AEG tools. Dedicated for AEG Cordless Tools: Tailored specifically for AEG power tools, ensuring optimal performance. Availability: Ensures the charger matches AEG batteries seamlessly. Gsdpfjxxzm Tjx Ahveiu Next Day Delivery

Condition: used, Year of construction: 1990, saw blade diameter 400 mm cutting length 400 mm cutting diameter 130 mm speeds 9,5 - 48 U/min peripheral speed 12 - 60 m/min 130 mm 125 mm 400 x 125 mm Gedpfx Aouia Hrohvoiu 130 mm 110 mm rechts 200 x 125 mm links 280 x 125 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 2,0 x 1,7 m

Condition: used, Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 Gjdpjct A Ivsfx Ahveiu -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg