Used Aht Freezer Aht Paris 210 (-) / (U) for sale (43,169)

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Njdpjrfclqofx Am Ujcw Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: used, net length ± 18.300 mm net width ± 1.800 mm max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C medium : ammonia/freon capacity 1.500-2.000 kg/h (depending on the product) Ncsdpfx Aezktztom Uow machine is modular and can be shortened by ± 1/3.

Year of construction: 2020, condition: ready for operation (used), A Guggenberger chamber washing machine is available. Number of wash carts: 8, wash cart capacity: 8 pallets, pallet dimensions X/Y/Z: 1200mm/800mm/160mm, spray pump power: 11kW, fan capacity: 4000m³/h, operating hours: approx. 4350h. Including rotary nozzles, spin drying unit, tilting device, exhaust fan with steam damper, condensate separator, gloss drying, tank heating with booster, compact belt filter system, oil skimmer and steam condensator. Documentation available. An on-site inspection is possible. Nodpfezlt N Hjx Am Uscw

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 power supply, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Ncedsi Ebi Uspfx Am Uow

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 main spindle drive, serial number: 230902-731398-003, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Ncedpfx Amoi Ebg Io Uew

Condition: ready for operation (used), SEW Eurodrive R17F DRS71M4 / TH geared motor SN: 01.1971210703.0008.14,used, good condition, 100% functional, scope of delivery as per photos Nsdpfx Amstwhr Us Ujcw

Condition: ready for operation (used), Siemens 6SN1118-0DM21-0AA0 control unit SN:ST-R72011661, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Ncedpfxjxahc Dj Am Uow

Condition: ready for operation (used), Siemens 6FC5210-0DA20-2AA1 MMC103 SN:KO2005280, the item has been refurbished and has a 3-month warranty, used, normal signs of wear, 100% functional, scope of delivery as per photos Ncsdporv Utwsfx Am Uew

Condition: ready for operation (used), Siemens 1FK7103-5AF71-1AA0 synchronous servo motor SN:YFX717210704001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Nsdpfotan Tcox Am Uecw

Condition: new, Müller Co-Ax 5-PCS-2 10 NC valve with external 24V DC actuator, unused, 100% functional, scope of delivery as shown in the photos. Ncsdpfji Eb Taex Am Ujw

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC-Mainspindle Drive SN230902774878005, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Nedstvctxopfx Am Uocw

Condition: ready for operation (used), Indramat TDM 1.2-100-W1-SO102 A.C. servo controller, serial number as shown in the photo, used, professionally and completely overhauled and tested with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately. Nsdoi Ebnyopfx Am Uscw

Condition: ready for operation (used), Fanuc A06B-6114-H210 Servo Amplifier Module, Version: D, Serial Number: V02472360, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfx Amoi D Uy Aj Uecw

Condition: ready for operation (used), Siemens 6SL3120-2TE21-0AA0 Double Motor Module SN: ST-U62007088, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately! Ncodexaha Aspfx Am Usw

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 1,450 h, load capacity: 200 kg, empty load weight: 5,450 kg, fuel type: electric, JLG Toucan 1210. Year of manufacture: 2013. Working height: 12 meters. Lateral reach: 5.2 meters. Platform capacity: 200 kg. Weight: 5450 kg. 24-volt batteries with built-in 230-volt charger. In good working order. Ncsdpfxsziwy Do Am Uew Video also available on WhatsApp. Price: net + 21% VAT or net for export.

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Equipment and technical data: - For classic nesting machining with a spoilboard - Machine frame of welded construction with ground and hardened prismatic guides for the moving column, aggregate head and consoles - Moving column in gantry design - Rack-and-pinion drive, helically toothed, in the X and Y directions, ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support surface on nesting table: X = 3100 mm Y = 1560 mm - Max. travel: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table Z = 100 mm from top of table (without spoilboard) - Maximum programmable speed vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid layout - continuous grooves in the X and Y directions - groove spacing 50 mm - with 25 metres of sealing cord for clamping the spoilboard - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - drive power: 1.7 kW - 13 vertical spindles: - individually selectable - U-shaped arrangement - 5+4 in the X and 4 in the Y direction - 32 mm grid - max. drill diameter: 35 mm - total drill length: 70 mm from screw-on end (depending on panel thickness) - spindle extension stroke: 70 mm - direction of rotation: clockwise / counter-clockwise alternating - n(max): 1000 - 4400 rpm infinitely variable - fitting: M 10 thread - fit 11 mm - without tool, without holder - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - fitting: M 10 thread, fit 11 mm - total drill length max. 63 mm from screw-on end - without tool, without holder Nodpfx Amozlbrpj Uocw - Milling unit 7842: - power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - max. power at 12000 rpm to 24000 rpm - air-cooled - with HSK-F 63 tool holder - with right-hand thread nut (for right-rotating tools) - with collet chuck with HSK shank - ceramic ball bearings (hybrid bearings) - tool weight max. 6 kg (incl. holder) - tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standard - Protective fence at the sides and rear - Vacuum pump: 500 m³/h, dry-running - Personal safety via light barriers in the front area of the machine - Hand-held control unit for remote control of the machine with the following operating functions: - start / stop of the machining program - speed control of the machining cycles - reset button - manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine licence consisting of: - CAMPUS NC-HOPS: - graphical variant system with WOP and CAD/CAM properties for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined lubrication intervals - Additional sealing against dust through overpressure in every guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y and Z directions - for all ball screws in the Y and Z directions - for all milling spindle guides - for tool changer guides (except pick-up tool changer) - All console guides are not lubricat...

Condition: used, mileage: 431,000 km, power: 285 kW (387.49 HP), first registration: 05/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro5, loading space length: 6,500 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Volvo FM/FH-6x2R 380 construction vehicle with crane, Palfinger PK21001 rear crane, manufactured in 2012, 2x hydraulic outriggers, max. lifting/load capacity 4850 kg at 5.90 m, max. reach 15.90 m/lifting capacity 940 kg, elevated operator platform, pallet fork, platform length approx. 6.50 m, short-haul cab, air suspension, lift axle, steered axle, differential lock, trailer coupling, EBS (electronic braking system), automatic climate control, auxiliary heater, roof hatch, refrigerator compartment, underrun protection, rotating beacons, sun visor, tool box, refrigerator compartment, radio/CD. First owner. Njdpfxszkyide Am Uecw Inspection book/crane inspection book.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,145 h, load capacity: 6,000 kg, lifting height: 3,900 mm, free lift: 1,900 mm, load center: 1,070 mm, fuel type: diesel, mast type: duplex, construction height: 3,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 5,550 mm, fork length: 2,100 mm, fork width: 150 mm, fork thickness: 55 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27X10-12, rear tire type: cushion tires (black), rear tire size: 33 X 13 3/4 X 22, overall weight: 16,800 kg, empty load weight: 10,800 kg, total height: 2,670 mm, total length: 4,250 mm, total width: 3,000 mm, color: orange, Equipment: CE marking, adjustable boom, all wheel drive, cabin, fork extension, lighting, pallet forks, sideshift, 🚜 FOUR-WAY SIDELOADER FORKLIFT – COMBILIFT C6000SL – 2012 | 2145 HRS | DIESEL | DUPLEX 3900 MM | 5550 MM SPREADER BAR ⚙️ Ready to work from day one – no investment, no risk. --- ### 🔍 Why choose this unit? Need a machine that keeps your production running? This COMBILIFT C6000SL is a reliable, fully serviced unit – just start working. No hidden costs. ✔️ Fully serviced (oils, filters, complete inspection of all components) ✔️ Technical and visual condition: like new ✔️ Only 2145 operating hours – genuinely low usage ✔️ New tires – no additional investment required --- ### 📊 Key Specifications * ⚖️ Capacity: * Without spreader bar: 6000 kg * With spreader bar: 4100 kg * ⛽ Drive: Diesel * ⬆️ Mast: Duplex – 3900 mm * 🔧 Fork positioner / spreader: 5550 mm * 📏 Forks: 2100 mm * 🚪 Cabin: full / heated * 🏗️ Platform: 2100 mm --- ### 🛠️ Full Technical Specification 📌 General: * 📅 Year of manufacture: 2012 * ⏱️ Operating hours: 2145 hrs * ⚖️ Capacity: * Without spreader bar: 6000 kg * With spreader bar: 4100 kg * ⚙️ Load centre: 1070 mm * 🏋️ Machine weight: 10,800 kg ⬆️ Mast and Lifting: * 🔩 Mast type: Duplex * 📐 Lift height: 3900 mm 🔧 Forks and Attachments: * 📏 Fork positioner / spreader: 5550 mm * 📏 Fork length: 2100 mm 📏 Dimensions: * Height: 2670 mm * Length: 4250 mm * Width: 3000 mm * Overall height: 3250 mm 🚜 Running Gear: * 🛞 Tires: Superelastic (100%) – new * Front: 27x10-12 * Rear: 33 x 13 1/4 x 22 ⚙️ Equipment: * 🚪 Full heated cabin * 🔧 5550 mm spreader bar * 🏗️ 2100 mm platform * 🎮 Joystick control * ⚖️ Truck leveling system 📊 Condition: * ✔️ Technical: 5/5 – fully serviced * ✨ Visual: refurbished, like new, no corrosion --- ### 🏭 Ideal for: ✔️ Narrow aisle warehouses ✔️ Timber, steel, and pipe industries ✔️ Handling long loads ✔️ Indoor and outdoor operation --- ### 💼 What you are buying You are not buying a "used forklift." You are buying a tested, work-ready machine: ✔️ Each unit undergoes full testing before sale ✔️ Ready for immediate deployment ✔️ 📡 Live online presentation available ✔️ 🚛 Delivery to your company possible --- ### 🌍 Delivery and Support * 🚛 Transport across Europe * 📦 Comprehensive logistics support * 💳 Support with leasing / financing * 🤝 After-sales support --- ### 🏆 Why FT LOGISTICS? We deliver machines that work – not those sitting in service. ✔️ Over 100 machines available ✔️ 🛠️ In-house service and preparation ✔️ 🌍 Experience across Europe ✔️ 👍 Hundreds of satisfied customers Nedpfx Amjzmngij Uecw --- ### 📞 Contact us now FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F,20% discount at order more then 1 robot. Ncedpfx Aexq Tu Hjm Usw DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Ncjdpfx Ajzkivtjm Uow Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: good (used), mileage: 442,754 km, power: 154 kW (209.38 HP), first registration: 05/2008, fuel type: diesel, tire size: 265/70R17.5, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro4, suspension: steel-air, permissible axle load (axle 1): 4,700 kg, permissible axle load (axle 2): 8,700 kg, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = Njdpfeziba Isx Am Uecw - Leaf spring suspension - Windshield - Enclosed cab - Power Take-Off (PTO) = Additional Information = Tire size: 265/70R17.5 Front axle: Max. axle load: 4700 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Leaf spring suspension Rear axle: Dual tires; Max. axle load: 8700 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%; Suspension: Air suspension Unladen weight: 8,700 kg Payload: 3,290 kg GVWR: 11,990 kg Body brand: HIAB 077 DUO Technical condition: good Optical condition: good

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 2026, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Ncjdpszhxgiefx Am Usw Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: like new (used), A complete set including the C9900-K652 cable + CP Link 4 model CU8803-0000. We have 4 sets available. Price is for 1 set. The BECKHOFF CP3921-0010 is a professional operator panel equipped with a 21.5-inch Full HD screen and Multi-Touch technology, designed for use in industrial automation, machine control systems, and modern production environments. The device works with CP-Link 4 technology, enabling the transmission of images, data, and power through a single cable. The Beckhoff CU8803-0000 is an industrial transmission module (Transmitter) of the CP-Link 4 system, designed for remote connection of Beckhoff operator panels to industrial computers and automation controllers. The device enables the transmission of images, USB signals, and control communication through a single Ethernet cable, allowing the operator panel to be installed at a considerable distance from the control unit. This solution is widely used in industrial machines, production lines, and automation stations requiring separation of the industrial computer from the HMI panel. Beckhoff C9900-K652 – RJ45 CAT 6A connection cable, 5 m, is an industrial communication cable designed to connect Beckhoff operator panels with the CP-Link 4 interface. The cable ensures reliable transmission of data, images, and control signals between the industrial computer and the operator panel in demanding industrial conditions. The cable is equipped with a standard RJ45 connector and an industrial IP65 connector designed for Beckhoff CP39XX series panels. Thanks to its shielded CAT 6A construction, it guarantees high resistance to electromagnetic interference and stable data transmission. The panel was designed for continuous operation in demanding industrial environments, providing high-quality images, intuitive multi-touch operation, and easy integration with control and process visualization systems. Specifications Manufacturer: BECKHOFF Model: CP3921-0010 Njdpjzkaqzsfx Am Uocw Type: Industrial HMI operator panel Screen diagonal: 21.5″ Resolution: 1920 × 1080 (Full HD) Touch technology: Multi-Finger Touch Screen Interface: CP-Link 4 Function: Display Only Application: Industrial automation, process visualization, machine control Key features High-quality Full HD screen, Multi-touch support, CP-Link 4 technology – transmission of images, data, and power via a single cable, Industrial design adapted for continuous operation, Easy integration with control and visualization systems, Modern operator panel for production and laboratory environments. Applications Industrial automation, HMI operator stations, Machine control systems, Production lines, Process monitoring systems, Research and development laboratories, Industrial applications operating in 24/7 mode. The device comes from equipment used in research and development activities related to industrial automation, measurement systems, and technology projects. The technical and visual condition is consistent with the product photos. The product is covered by a start-up warranty.

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2026, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, Year of construction: 2026, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-660 Registered for 3 months, returned from rental. Used PAVIC HTA 20 66Z short timber trailer with ALCOA DURA BRIGHT. IMMEDIATELY AVAILABLE! 2-axle bogie trailer 4x OPTIPA SL bogies 8x OPTIPA AL10 loading beams 2x impact bars (steel) Chassis length approx. 6600 mm Front overhang approx. 710 mm (turntable bogie) Screw-on hooks on the loading bogies for securing the load Payload 14,750 kg Total weight technically possible 22,000 kg EBS / ABS Air suspension with safety cables, leaf spring suspension available upon request 2 x 10t SAF off-road axles Steering ring with double ball bearing row, max. load 20 tons Lifting cable at the front Smartboard Wabco Clearly visible signal light system at the front to indicate the maximum air spring pressure LED lighting LED work lights High-quality KTL coating - including baking process Twin tires: 275/70 R 22.5 with branded tires Aluminum wheel manufacturer ALCOA Dura-Bright Financing available through our financing partners. Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. Ncedpfx Amezikhhj Uow = Further Information = Axle configuration Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Aluminum rims; Steered Rear axle: Aluminum rims Functional Body brand: PAVIC short timber bogie OPTIPA SL Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: very good Optical condition: very good Damage: none

Condition: good (used), U-profile for horizontal and diagonal applications Ncjdpfx Ameuq A Ngj Uow 📏 Length: max. 3 meters (cutting to size on request) 🔩 Material thickness: 1.8 mm 📐 Width: 50 mm and 70 mm 🏭 Compatible with: Nedcon, Polypal, Stow, and MPB shelving systems If you require shelving or accessories in other configurations or designs, please contact us. Shipping: Please inquire about the shipping costs, providing your postal code and city, as well as the desired quantity of items.