Used Akbend Plate Rolling Machine for sale (75,227)

Condition: new, sheet width 3100 mm plate thickness 16,0 mm ST pre-bending 20,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 15,0 kW weight of the machine ca. 13.200 kg. dimensions of the machine ca. 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Giedpfx Ahjxabzajvju - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Gedjd Eqg Hjpfx Ahvjiu Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: good (used), functionality: fully functional, Year of construction: 2011, Biko 3128 – Plate Rolling Machine (2011) High-quality 3-roll plate bending machine for professional metal fabrication. Well maintained and ready for work. Technical Specifications Model: Biko 3128 Year of manufacture: 2011 Rolling type: 3-roll, initial pinch Max. plate width: 3100 mm Max. bending capacity: 28 mm (depending on material grade) Top roll diameter: To be confirmed Gsdpfex Dx Hzox Ahveiu Side roll diameter: To be confirmed Motor power: To be confirmed Control system: Hydraulic, with adjustable side rolls Cone bending capability: Yes Machine construction: Heavy-duty welded frame Safety: Emergency stop & foot pedal control Condition Machine is in very good working condition Regular service history Test run possible Included Foot pedal Hydraulic adjustments Dimensions & Weight (Confirm exact values with seller) Length: 5.0 m Width: 1.8 m Height: 1.6 m Weight: 12,000 kg

Condition: new, Year of construction: 2025, – 4 rollers – Capacity: 1270 x 4.5 mm – Pre-bending capacity: 1270 x 3.5 mm – Hardened rollers – Top roller diameter: 130 mm – Bottom roller diameter: 110 mm – Side roller diameter: 110 mm – Digital display for left roller movement Gedpfx Ahsxdvafjvjiu – Digital display for central bottom roller movement – Digital display for right roller movement – Steel construction ST-52 – Documentation – 400V

Condition: new, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm Gijdexytlqspfx Ahvsu – Side roll diameter: 130 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: new, sheet width 2070 mm plate thickness 10 mm Gjdevn U H Aepfx Ahvjiu pre-bending 8 mm total power requirement 7 kW weight of the machine ca. 5 t dimensions of the machine ca. 4050 x 1470 x 1550 mm

Condition: good (used), Year of construction: 2008, Technical Data: Gjdjx Nntkopfx Ahvoiu Working width: 1030 mm Max. bending capacity for mild steel St40: 10.0 mm Upper roller diameter: 170 mm Number of driven rollers: 2 Electric drive Mobile control panel Manual swing-out of the upper roller CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 2700 x 1200 x 1300 mm Net weight: approx. 2.8 tons The seller accepts no liability for typing or data transmission errors. The machine is in condition in line with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: new, sheet width 1570 mm plate thickness 10 mm pre-bending 8 total power requirement 7 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,5 x 1,5 x 1,55 m Gjdovkixxepfx Ahvjiu

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, A very well-maintained 4-roll CNC plate bending machine LUNA Model: 8344 17/06 Four-roll drive CNC control Mylock 100 Control system operates 4 functions: Feed, bending, clamping, and locking of the top roll Max. working width: 1750 mm Max. sheet thickness: 0.6 mm Year of manufacture: 2003 Weight: 700 kg Gisdpfox Nw N Isx Ahvsu Made in Sweden

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Gisdpfjgurb Hjx Ahveu Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MC0 35100, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, roller diameter: 1,000 mm, sheet thickness (max.): 130 mm, sheet thickness steel (max.): 130 mm, total length: 3,500 mm, power: 240 kW (326.31 HP), Technical details Max. bending width: 3,500 mm Max. sheet thickness: 200 mm Gedpjyn Agbefx Ahveiu Total power requirement: 160 kW Smallest roll-in diameter: 770 mm Maximum cylinder pressure: 2 x 2 t Top roll Ø1000 mm Bottom rolls Ø900 mm

Condition: new, Year of construction: 2024, neu 2024 9739 prompt, Zwischenverkauf v Türkei 22300 € 428.16 € 1 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm 1120 mm 2400 kg Gsdswirurspfx Ahveiu 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Giodpfxexxvlks Ahvsu

Condition: good (used), functionality: fully functional, Year of construction: 2016, Four-roll hydraulic CNC sheet metal bending machine. Gijdjy Sz Erspfx Ahvju The machine is designed for bending sheet metal and manufacturing cylindrical or conical parts. Thanks to its four-roll design, it enables precise pre-bending and bending in a single working cycle. Suitable for mechanical engineering production, steel structures, tanks, pipe components, and other heavy-duty sheet metal applications. Technical specifications: Manufacturer: Durma / Durmazlar Model: HRB-4 2535 Year of manufacture: 2016 Type: Four-roll hydraulic sheet metal bending machine with CNC control Max. sheet thickness: 35 mm Working width: approx. 2,560 mm Machine length: 5,010 mm Machine width: 2,060 mm Machine height: 2,050 mm Machine weight: 20,300 kg Motor power: 37.4 kW Voltage: 400 V / 50 Hz Serial number: 683316002 Equipment and accessories: CNC control Hydraulic roll adjustment Side support Top support Feeding table / supporting roller guide Documentation / operating manual The machine is connected and can be tested by arrangement.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual Gijdpow Slctofx Ahvsu OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm Giedpfowk Rlxjx Ahveu width: 65cm weight: 240kg

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Giodpfjfnk Ehox Ahvju Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Giodpscxb Nmsfx Ahvou Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: refurbished (used), Currently undergoing rebuilt, it is possible to customize it. Ingramatic RP1 Fixed die length: 85 mm. Moving die length: 95 mm. Die thickness: 25 mm. Die height: 65 mm. Thread diameter: M2 ÷ M6 Shank length: 100 mm. Thread length: 62.5 mm. Giedpfx Ahjzcd Hfevju Speed Range up to: 600 pcs./min.

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Giedpfx Ajzcnuyshvou Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Gsdjzb Imajpfx Ahveiu Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24

Condition: good (used), Year of construction: 2019, 1 used horizontal reciprocating roller grinding machine Manufacturer: Granlund Type: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control: Fanuc Series 31i - B Technical data Max. workpiece length (mm): 300 Outer diameter of ring grooves (mm): 120-650 Grinding wheel diameter (mm): 356 Grinding wheel thickness (mm): 75 Tailstock quill stroke (mm): 45 Equipment: automatic grinding wheel dressing device, Giedpfxoy Nxd To Ahvsu 2 x tailstock, paper band filter system, oil mist extraction, control cabinet with cooler, grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Technical features It is possible to perform deep grinding on soft workpieces. This means that no pre-milled blank parts need to be manufactured or purchased, as the machine performs the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Gijdpfx Ahoyurx Tsvju Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Gijdszczvdopfx Ahvju Weight: 5 kg Good condition

Condition: good (used), Year of construction: 1997, functionality: fully functional, For rolls, baguettes, and cake layers. Top and bottom conveyor belts are new, blades have been newly sharpened by Krumbein themselves. Gjdpfx Ahszcf A Ijvjiu Belt width: 40 cm. Machine length: 80 cm. Cutting height and speed are adjustable. Self-collection only.