Used Amut Extruder for sale (375)

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Hodpourvzrofx Ab Tot Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards. Hsdpfx Abjycfw Eo Tst

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Hsdpfxjyvh Ubj Ab Tjt Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T

Year of construction: 2021, operating hours: 220 h, condition: like new (used), functionality: fully functional, machine/vehicle number: B144, HIGH MOISTURE EXTRUSION (HME) Extruder HME is able to create structured, palatable and nutritious products. Possible industries: - Plant-based Food (Clean label products with great texture) - Pet Food Industry (Wet Pet Food Production, Functional treats and chews, Alternative Protein incorporation) - Aquaculture Feed Industry (Structured aquafeeds, Nutrient Enhancement) - Nutritional supplement and medical foods (High-Protein Supplements) - Snack and convenience foods (High-Protein snacks, Meat-Free Meal Kits) - Sustainable and Alternative Protein Products (Insect and Algae Protein Texturization, Upcycled Food Products) Hodpfxjx Ac Uto Ab Tjt The package includes: • High-quality Clextral HME Extruder • Additional equipment enabling faster start of production Reason for sale: We tried with the project in Plant-based industry in Slovenia and stopped the project in Jan. 2025. Machine was bought at the end of 2021, started operating in H1 of 2022 and worked for only 220 hours. Attached you can find a document with key information about the machine and additional equipment. The machine is in excellent condition ("like new"), used for only 220 hours and meticulously maintained – guaranteeing flawless operation and immediate usability after installation. A catalogue of plant-based products we have manufactured is also included. If you are interested in HME extrusion, we invite you to explore the technical documentation, photos, and VIDEO content available upon request.

Condition: used, Year of construction: 2008, The MAXDROP type machine is used for the production of various pastry products such as muffins, shortcrust biscuits, meringue cookies, sponge cakes, and others. Brand: MaxDrop 2000 Model: AL 200 Head width: 600 mm Recipe memory: up to 90 recipes Machine dimensions: 1100 x 1400 x 1375 mm Year of manufacture: 2008 Power supply: 400 V Installed power: 1.64 kW Hedpox Irkdsfx Ab Tjt Weight: 400 kg Condition: used Original technical documentation + CE declaration.

Condition: new, Machine function: puffing and expanding corn, rice, millet, and sorghum. The end product can be flavored, seasoned, or mixed with other flours before extrusion. Flavoring options: paprika, salt, pepper, garlic powder, mushrooms, natural proteins. Capacity: 12–20 kg/h processed raw material. Motor drive: 4 kW, 0.18 kW. Hopper: maximum 5 kg material. Hsdpfoxvxd Rsx Ab Tot With steam extractor.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request. Hsdpfxjy Ufk Ro Ab Tst

Condition: excellent (used), Year of construction: 2022, Tamutom 1 ton in 24 hour flaked ice machine with holding bin Hedpfoy E Irxjx Ab Tst

Condition: used, spindle bore: 51 mm, swing diameter over cross slide: 300 mm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 300 mm, Used lathe Brand: Amutio Cazeneuve Model: HB 575 Distance between centers: 1,000 mm Swing over bed: 575 mm Swing over carriage: 525 mm Swing over cross slide: 300 mm Spindle bore: 51 mm Hjdpjyzrhcefx Ab Tet Speeds: 32–2500 rpm Power: 10 kW Bed width: 400 mm Includes: - 300 mm chuck with several sets of jaws - Closed steady rest - Quick-change tool post with 3 tool holders - Aurki digital readout (2 axes) - 2 live centers - Tray with coolant system

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle -extruder 600/560 Händle and Mixer MDV920b Hedpfjzmxi Uex Ab Tot -filermixer Händle -roller mill 800x800 Händle WFZ880a - conveyer 40m x 80 cm gummi

Condition: like new (used), For older butyl extruders from Lenhardt Maschinenbau. Original belts. Belt dimensions: 5600 x 40 mm Application: Manual butyl extruder / Lenhardt Width: 40 mm Thickness: approx. 2 mm Length: 5600 mm Weight: 567 g Condition: Like new Hodpfxsy D Hvmo Ab Tst

Condition: good (used), Extruder for the production of plastic pipes The machine can be inspected by appointment! Videos demonstrating its operation can be viewed on the manufacturer's website! Hodpfx Abjxcwxyj Tst

Condition: new, empty load weight: 450 kg, maximum load weight: 850 kg, overall weight: 1,300 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 195/55r10c, *Car trailer* with tilting function, featuring a *mesh side extension* and 100 km/h approval, manufactured by *trailer manufacturer* STEMA, type MUT O2. The stable *mesh side extension* makes this *box trailer* suitable for transporting *garden waste*, *small furniture, firewood, lawnmowers, ATVs, and small machines*. Hsdpfxeiwh Nms Ab Tst As standard equipment, the *steel trailer* features a *crank for tilting the loading platform*, a *ramp*, *100 km/h approval*, a *support wheel*, eight *tie-down points*, *high-quality latches*, *galvanized side panels, hot-dip galvanized mesh side extension*, and a *V-shaped drawbar*. This *car trailer* is also available in various versions, for example as a *covered trailer* or in an open version. We also offer accessories such as *side panel extensions*, *tarpaulin and frame*, *flat tarpaulin*, *drawbar box*, cargo net, *drawbar protection cover, anti-theft device, and tie-down straps* at attractive prices.

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth Hedszmnp Ropfx Ab Tot - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times USEON, Extrusion Tooling Accessories -Type: unfortunately without type designations -Perforated plates: 3 pieces 1940/210/H60 mm -Individual components: see photos -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm Hodpfx Aszpwcxeb Tjt -Weight: 2510 kg / 560 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Hsdeyhcabopfx Ab Tst Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Maximum size: 2300x2500mm Hsdpfxjzw Erws Ab Tst Minimum size: 250x250mm, but not suitable for Georgian bars.

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Hsdpjzw D Hasfx Ab Tjt Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, Year of construction: 2007, 2007 Extrude Hone OrbiTEX 150 Orbital Abrasive Flow Polishing & Finishing Machine With Advantech Controls Control Hjdezt N Dpepfx Ab Tot Maximum Workpiece Ø198mm, Maximum Workpiece Length 300mm. Voltage 400V. S/No. ORB06-1451 (2007). Weight 2,100kg.

Year of construction: 1998, condition: like new (used), functionality: fully functional, SERAP CRUST FLOW P ID.NO. 2797 Serap Crust flow P tunnel which allows complete crust freezing of delicate and soft foods, etc. such as extruded biscuits, pasta, mousses, ready meals, ice cream etc. Also suitable for freezing meat products before slicing.Dimensions 320 x 120 cm H 165 cm Bandwidth 40 cm Hodpsumbyiofx Ab Tot

Condition: good (used), Year of construction: 2012, functionality: fully functional, Pouch Sealing: • Flat pouches. • Doypack (stand-up) pouches. Zipper Integration: • Capability to seal all types of zipper closures. Advanced Finishing Operations: • Punching of holes, handles, and easy-open features. • Rounded corners for aesthetic and safety purposes. Branson Ultrasonic Technology: • Ultrasonic sealing of zippers, ensuring precision and durability. Additional Equipment: • Built-in screw compressor (10 bar). • Chiller for the cooling station, ensuring efficient cooling of bottom seals and zipper seals. Technology and Modular Design • The machine's modular design allows it to be tailored to various types of films, including laminated and co-extruded films, while maintaining high precision and process repeatability. • Servo technology ensures excellent control of tension and sealing time, resulting in outstanding product quality and stability. Types of Pouches Produced on the Vegaplus Pouch System: • Three-side-sealed pouches. Hedsvdptcopfx Ab Tet • Zipper pouches. • Doypack (stand-up) pouches made from a single film or with a separately inserted bottom gusset. • Retort pouches with rounded corners (notch-less). • Side-gusseted pouches with zippers.

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Hodezkru Eepfx Ab Tet Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Hjdszqt Dnopfx Ab Tet Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). Hodpey U H Hmefx Ab Tet ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: Hedpozuk Tnsfx Ab Tot – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials